• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.749-758
• /
• 2004

In this paper, we propose a new method utilizing only raw corpus without additional human effort for disambiguation of target word selection in English-Korean machine translation. We use two data-driven techniques; one is the Latent Semantic Analysis(LSA) and the other the Probabilistic Latent Semantic Analysis(PLSA). These two techniques can represent complex semantic structures in given contexts like text passages. We construct linguistic semantic knowledge by using the two techniques and use the knowledge for target word selection in English-Korean machine translation. For target word selection, we utilize a grammatical relationship stored in a dictionary. We use k- nearest neighbor learning algorithm for the resolution of data sparseness Problem in target word selection and estimate the distance between instances based on these models. In experiments, we use TREC data of AP news for construction of latent semantic space and Wail Street Journal corpus for evaluation of target word selection. Through the Latent Semantic Analysis methods, the accuracy of target word selection has improved over 10% and PLSA has showed better accuracy than LSA method. finally we have showed the relatedness between the accuracy and two important factors ; one is dimensionality of latent space and k value of k-NT learning by using correlation calculation.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.171-182
• /
• 2018

Papaya (Carica papaya L.) is one of the crops widely planted in tropical and subtropical areas. The papaya fruit has low calories and are plentiful in vitamins A and C and in minerals. A major problem in papaya production is a plant disease caused by the papaya ringspot virus (PRSV). The first PRSV-resistant GM papaya expressing a PRSV coat protein gene was developed by USA scientists in 1992. The first commercial GM papaya cultivars derived from the event was approved by the US government in 1997. Development of transgenic papayas has been focused on vaccine production and limited agricultural traits, including insect and pathogen resistance, long shelf life, and aluminum and herbicide tolerance. Approximately 17 countries, including the USA and China, produced transgenic papayas and/or commercialized them, which provoked studies on biosafety assessment and development of GM-detection technologies. For the biosafety assessment of potential effects on human health, effects of long-term feeding to model animals have been studied in terms of toxicity and allergenicity. Studies on environmental safety assessment include influence on soil-microbial biodiversity and transfer to soil bacteria of GM selection markers. Many countries, such as Korea, the European Union, and Japan, that have strict regulations for GM crops have serious concerns about unintended introduction of GM cultivars and food commodities using unauthorized GM crops. Transgene- and/or GM event-specific molecular markers and technologies for genomics-based detection of unauthorized GM papaya have been developed and have resulted in the robust detection of GM papayas.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.1
• /
• pp.91-117
• /
• 2008

The relationships between science, technology, and industry are very complicated and vary according to time. Thus, it would be almost impossible to combine the three categories in a single model. However, the linking of science, technology, and industry, which are divided according to their respective classification standards, is a starting point from which to understand how science and technology, technology and industry, and further science, technology, and industry are related to each other. Studies have been carried out to analyze the relationship between science and technology and between technology and industry, whereas no study has been undertaken to get an overall view of science, technology, and industry. Since an appropriate methodology or an analytical model has not been suggested, this paper proposes a model for generally analyzing science, technology, and industry. More specifically, this paper examines the methodology for linking science, technology, and industry. This paper uses citation analysis to analyze knowledge flow such as absorption and utilization of given knowledge, looks at the provision of knowledge to create new knowledge, and examines the use of network analysis to analyze the complicated phenomenon of knowledge flow. This paper proposes an empirical study of trend analysis of technological innovation by looking into a linkage structure of knowledge flow among science, technology, and industry based on the classification linkage and analysis methodology using scientific paper and patents.

• Cartoon and Animation Studies
• /
• s.15
• /
• pp.221-235
• /
• 2009

Most of the sounds used in animated films are artificially made. A large number of the sounds used are either actual sound recordings or diversely processed artificial sounds made with professional sound equipments such as synthesizers. One animation episode contains numerous amounts of sounds, resulting in significant sound production costs. These sounds have full potential to be reused in different films or animations, but in reality we fail to do so. This thesis discusses ways these sound sources can be acknowledged as added new values to the present market situation as a usable 'digital content'. The iTunes Music Store is an American Apple company product that is acknowledged as the most successful digital content distribution model at the time being. Its system's sound library has potential for application in the Korean sound industry. In result, this system allows the sound creator to connect directly to the online store and become the initiative content supplier. At the same time, the user can receive a needed content easily at a low price. The most important part in the construction of this system is the search engine, which allows users to search for data in short periods of time. The search engine will have to be made in a new manner that takes into consideration the characteristics of the Korean language. This thesis presents a device incorporating the Wiki System to allow users to search and build their own data bases to share with other users. Using this system as a base, the Korean animation sound library will provide development and growth in the sound source industry as a new digital sound content.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.505-512
• /
• 2001

This study examined the impacts of tariff reductions on timber products in the new round of WTO negotiations on domestic timber products markets and presented the measures to minimize their impacts. Scenarios on reductions in tariffs were developed based on result of UR negotiation and prospective issues on scope of tariffs bound, base rates for negotiation, degree of tariff cuts, etc. emerged during preparatory meetings held to launch the New Round of WTO Negotiation. Korea Timber Market Model(KORTIMM) developed by Korea Forest Research Institute was used to simulate the impacts on forest products markets by scenario. It was estimated that their impacts on net imports would be much larger than those on both consumption and production. The results showed that their impacts on plywood market and on net imports of processed forest products would be much larger relatively but that their impacts on log market and on consumption and production of processed forest products would be less than 1 percent. It was estimated that log consumption would be reduced due to reduction in domestic production of processed products and thus both production and imports of logs would be reduced as well. In oder to minimize the impacts, efforts should be made to start negotiations to reduce tariffs with bound rates for bounded products and with applied rates for non-bounded products, to expand the implementation period and to maintain the status of developing country. In addition, it might be one of countermeasures to use legitimate measures consistent with WTO rules such as anti-dumping, countervailing measures and safeguards.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2012

In the current construction planning and designing process, an architectural miniature model was designed to verify the interior or exterior spatial sense of a building structure, but building of the miniature model is demand much more effort and time; in addition to this it has limitation to identify interior information of the building. For a complement of it, CAD would be used in the existing planning and designing process to visualize the building information, but its visualization is not satisfactory for the 3D volume which could be easily verified with the miniature model. CAD is the specific software for designing building structures and the 3D results are usually rendered on 2D monitor screen. Therefore, there is a shortage of cognitive immersion for the 3D space. In this paper, we introduce the conversion process of BIM shape data into the Augmented Reality contents by using a series of softwares. As a result of modification on construction plan or design we reduced the cost and time to reconstruct the final visualization. We have shown that the interior or exterior information of the building structures are easily visualized with BIM shape data on augmented reality environment. Several proposed interaction methods, such as rem oval of building components, and slice-cut operation, provide the user for the effective manipulation of models on the augmented reality environment.

• Journal of The Korean Association of Information Education
• /
• v.24 no.1
• /
• pp.49-57
• /
• 2020

The society we are living in has being changed to the age of the intelligent information society after passing through the knowledge-based information society in the early 21st century. In this study, we have developed the instructional model for software education based on the machine learning which is a field of artificial intelligence(AI) to enhance the core competencies of learners required in the intelligent information society. This model is focusing on enhancing the core competencies through the process of problem-solving as well as reducing the burden of learning about AI itself. The specific stages of the developed model are consisted of seven levels which are 'Problem Recognition and Analysis', 'Data Collection', 'Data Processing and Feature Extraction', 'ML Model Training and Evaluation', 'ML Programming', 'Application and Problem Solving', and 'Share and Feedback'. As a result of applying the developed model in this study, we were able to observe the positive response about learning from the students and parents. We hope that this research could suggest the future direction of not only the instructional design but also operation of software education program based on machine learning.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.25-33
• /
• 2014

This study investigates the reliability of DSRC-based traffic information system on the typical urban arterial with the minimum sample size method. VISSIM has been employed to calculate the required sample size. After comparing the number of hi-pass vehicles recorded from DSRC and the required sample size, this study found that the interrupted traffic state tends to generate more outliers than the uninterrupted one, the lack of the number of vehicles completely passing links with multiple driveways makes it difficult to estimate the reliable traffic information, the traffic information during peak hour is relatively more reliable than that during off-peak hour, and the reliability of DSRC-based traffic information system depends on the significance level in calculating the sample size. The driveway density and traffic signal operation due to the individual link length significantly affects the required sample size, resulting in determining the reliability of the DSRC-based traffic information system.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.55-68
• /
• 1999

Many ITS services require map databases in digital form to meet desired needs. Due to the dynamic nature of ITS and the sheer diversity of applications, the design and development of spatial databases to meet those needs pose a major challenge to both the public and private sectors. This challenge is further complicated by the necessity to transfer locationally referenced information between different kinds of databases and spatial data handling systems so that ITS products will work seamlessly across the region and nation. The Purpose of this paper is to develop the framework-models commonly to reference locations in the various applications and systems-the ITS Map Datum and LRS(Location Referencing System). The ITS Map Datum consists of the around control points which are the prime intersections (nodes) of the nationwide road network In this study, the major points have been determined along wish link-node modeling procedure. LRS, defined as a system for determining the position (location) of an entity relative to other entities or to some external frame of reference, has also been set up using CSOM type method. The method has been implemented using ArcView GIS software over the Kangnam and Seocho districts in the city of Seoul, showing that the implemented LRS scheme can be used successfully elsewhere. With the proper advent of the K.ITS architecture and services, the procedure can be used to improve the data sharing and to inter operate among systems, enhancing the efficiency both in terms of money and time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.753-764
• /
• 2020

In this study, the plastic zone and internal earth pressure of the tunnel were calculated using the following three methods: metal plasticity to analyze the deformation of metal during plastic processing, Terzaghi's earth pressure theory from the geotechnical perspective and modified Terzaghi's earth pressure theory, and slip line theory using Mohr-Coulomb yield conditions. All three methods are two-dimensional mathematical analysis models for analyzing the plane strain conditions of isotropic materials. Using the theory of metallurgical plastics, the plastic zone and the internal earth pressure of the ground were obtained by assuming that the internal pressure acts on the tunnel, so different results were derived that did not match the actual tunnel site, where only gravity was applied. An analysis of the plasticity zone and earth pressure via the slip-line method showed that a failure line is formed in a log-spiral, which was found to be similar to the real failure line by comparing the results of previous studies. The earth pressure was calculated using a theoretical method. Terzaghi's earth pressure was calculated to be larger than the earth pressure considering the dilatancy effect.