• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.187-187
• /
• 2015

Polyvinylidene fluoride (PVDF) 코팅은 뛰어난 내후성으로 인해 Pre-painted metal에 많이 응용되며 주로 고가의 건축물 외장재에 적용되고 있는데, 수지의 열가소성 특성으로 인해 도막경화시 Baking 온도 및 냉각속도가 도막의 결정화도에 영향을 주어 가공특성이 상이하게 변함을 확인 하였다.

• 한국재료학회지
• /
• 제15권10호
• /
• pp.632-638
• /
• 2005

To investigate the effect of Mo and Cu contents on tensile strength of cold drawn stainless steel 304H wires, metallographical and mechanical tests were performed for the wire specimens drawn to different drawing strains at room temperature. It was confirmed that the contents of Mo ana Cu have little influence on the tensile strength of drawn specimens, even though the strain induced martensite transformation decreased with increasing the contents of Mo and Cu. These results were explained by the strengthening of the formed martensite itself due to the solid solution effect of interstitial solutes, carbon and nitrogen. The contents of these elements were slightly higher in the specimens containing additionally added Mo and Cu.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.323-327
• /
• 2009

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. In order to predict residual stress which causes optical briefringence and mechanical warpage of silicone, finite element analysis was conducted for both curing and cooling process during silicone molding. For analysis of curing process, a cure kinetics model was derived based on the differential scanning calorimetry(DSC) test and applied to the material properties for finite element analysis. Finite element simulation result showed that the curing as well as the cooling process should be designed carefully so as to reduce the residual stress although the cooling process plays the bigger role than curing process in determining the final residual stress state.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.124-124
• /
• 2012

접촉운동기구 계면에서의 마찰력은 요소 혹은 시스템의 효율과 직접적으로 연관이 있으며 이로 해 마찰계수를 낮추기 위한 저마찰 표면처리는 Tribology 연구에 있어 기초적이면서도 동시에 매우 중요한 부분으로 오래 전부터 인식되어오고 있다. 또한 대부분의 습동기구 표면이 경화 처리되어 마모에 강한 특성을 보이나 이는 마찰계수가 일정 이하로 낮게 유지될 경우에만 해당되는 것으로 마찰계수의 조절은 매우 중요하다고 할 수 있다. 과거 자동차 엔진의 실린더 라이너 표면에 가공된 사선 형태의 패턴들이 저마찰 기능을 하는 것은 이미 잘 알려진 사실이며 최근에는 이러한 패턴 혹은 형상을 인위적으로 조절하여 저마찰 기능과 성능을 더욱 높이고자 하는 연구가 활발히 진행되고 있다. 이와 같은 미세한 패턴은 다양한 가공기술의 발전에 의해 가능하게 되었으며 그 결과 마찰계수는 패턴의 형상과 분포 등과 매우 밀접한 관계가 있는 것으로 보고되어 있다. 본 연구에서는 최근 활발한 연구가 진행되고 있는 표면 텍스쳐링 분야에 대한 전반적인 연구 동향과 미래의 가능성에 대해 살펴보고자 한다.

• 소성∙가공
• /
• 제14권4호
• /
• pp.327-337
• /
• 2005

In the present work, the two back stress kinematic hardening models are proposed by combining Armstrong-Frederick, Phillips and Ziegler's hardening rules. Simple combination of hardening rules using simple rule of mixtures results in various evolutions of the kinematic hardening parameter. Using the combined hardening models the ultimate back stress fur the present models is also derived. The stress rate is co-rotated with respect to the spin of substructure due to the assumption of kinematic hardening rule in finite deformation regime. The work piece under consideration is assumed to consist of the elastic and the rigid plastic deformation zone. Then, the J2 deformation theory is facilitated to characterize the plastic deformation behavior under various loading conditions. The plastic deformation localization behaviors strongly depend on the constitutive description namely back stress evolution and its hardening parameters. Then, the analysis for Swift's effects under the fixed boundaries in axial directions is carried out using simple shear deformation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.144-147
• /
• 2003

In order to evaluate spring-back behavior in automotive sheet forming processes, a panel shape idealized as a SS-rail has been investigated. After spring-back kas been predicted fer SS-rails using the finite element analysis, results has been compared with experimental measurements for three automotive sheets. To account for hardening behavior such as the Bauschinger and transient effects in addition to anisotropic behavior, the combined isotropic-kinematic hardening law based on the Chaboche type single-surface model and a recently developed non-quadratic anisotropic yield function have been utilized, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.391-394
• /
• 2003

Laser direct writing process is developed 3rd harmonic Diode Pumped Solid State Laser with the near visible wavelength of 355 m sensitive polymer is irradiated by UV laser and developed using polymer solvent to obtain quasi-3D. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, laser focus and optical properties of polymer. This process could be to fabricate a single mode waveguide without expensive mask projection method. Experimentally, the patterns of trapezoidal shape were manufactured into dimension of 8.4 mm width and 7.5 mm height. Propagation loss of straight waveguide measured 3 dB/cm at 1,550 nm.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.41-48
• /
• 1991

본 연구에서는 Kim등이 제안한 다공질금속을 위한 특수 구성방정식을 바탕으 로 하여 인장/비틀림 조합하중하의 다공질금속의 탄성-소성변형을 위한 구성방정식을 제시하였다. 탄성거동에서는 기공의 영향을 고려한 일반화된 Hooke의 법칙을 사용하 였고, 탄성-소성거동은 변형률공간을 주공간으로 하여 Naghdi등에 의해 개발된 탄성- 소성변형의 구성이론을 수정하여 다공질고체에 적용하였다. 끝으로, 본 논문에서 제 안된 구성이론은 Kim등과 본 연구에서 구한 인장/비틀림의 조합하중하에서의 다공질 철 소결체의 소성 항복조건 및 탄성-소성 거동의 실험치와 비교하였다.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.7-17
• /
• 1999

Aminophosphazene derivatives were prepared from hexachlorocyclotriphosphazene and used for the curing agents of epoxy resins. The effect of the curing agent on the dynamic viscoelastic properties, flame proofing, and heat resistance of the cured epoxy resins were investigated and compared with those for the epoxy resins cured with aliphatic and aromatic amines. The epoxy resin cured by 1,1-diamino-3,3,5,5-tetrachlorocyclotriphosphazene showed the highest storage modulus and glass transition temperature when cured at 19$0^{\circ}C$ for 6 hours. The epoxy resins cured with phosphazene derivatives showed superior flame proofing to those with aliphatic amine and aromatic amine. Particularly it is an effective curing agent for epoxy resins to enhance the storage modulus, flame proofing and resistance to heat.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.188-196
• /
• 2001

1, 1-diamino-3, 3, 5, 5-tetrachlorocyclotriphosphazene, 1, 1-diami-no3, 3, 5, 5-tetra-(p-bromophenoxy)cyclotriphosphazene, and 1, 1-diamino-3, 3, 5, 5-tetra-(p-chlorophenoxy) cyclotri-phosphazene(ACPP) was prepared from hexachlorocyclotriphosphazene and used for the curing agent of bisphenol A type epoxy resin and phenol novolak. The resistance to chemicals and water of the cured epoxy resins were examined by DMTA and compared with those of the epoxy rosins cured with phosphazene derivatives and 4, 4'-diaminodiphenylmethane. The effect of the curing agent on resistance to chemicals and water of the cured epoxy resins were investigated. The epoxy resins cured with 1, 1-diamino-3, 3, 5, 5-tetrachlorocyclotriphosphazene and 1, 1- diamino-3, 3, 5, 5-tetra- (p-bromophenoxy)cyclotriphosphazene showed superior resistance to chemicals and water to those of 1, 1-diamino-3, 3, 5, 5-tetra- (p-chlorophenoxy)cyclotriphosphazene and 4, 4'-diaminodiphenylmethane. It is an effective curing agent for epoxy resins to enhance the resistance to chemicals, water and tome proofing.