• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.27-36
• /
• 2006

Most of domestic multipurpose dams were basin area to be large, therefore, soil loss were occurred by downpour in the rainy season, They have caused to accumulate sediments on the river and dam reservoir that brought the decrease of storage volume and difficulties of the quality management of water. Until now, the measurement cycle of sediments surveying was long and it was designed to use surveying the degree of sediments, Thus there were many difficult things to secure accuracy. In this study, it was intended to analyze the origin position tracing of sediments and the movement route, for this purpose, aerial LiDAR technology was applied to precise sediments surveying. The amount and location of soil loss were evaluated by classified properties of soil, land-cover, and topographical conditions in detail. Therefore, the reliance could be maintained in analyzing the route of soil loss by extracting the flow within a watercourse and using the advanced accurate DEM.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.192-203
• /
• 2020

Remodeling is urgent as the number of closed factories in the industrial complex increases due to the long-term economic decline. Accordingly, the government is promoting the remodeling of a closed-up factory as one of the industrial complex restructuring projects underway to restore the competitiveness of aging industrial complexes. The purpose of this study in to analyze the feasibility of remodeling of 4 closed-up factory in an industrial complex. In details, this study analyzes the factories that need to be remodeled with the reasonable grounds, and suggests in what order and manner the remodeling should proceed. The data were collected from literature review and on site field survey. As a result of the study, the feasibility of remodeling was recognized in all four closed factories, but Factory A was found to require a more detailed rental attraction plan and management operation plan. The final conclusions were verified through working-level meetings and experts' advise.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.361-371
• /
• 2000

RC structure is the composite material system combined concrete and steel showing different plastic behavior. Especially, concrete shows very complex plastic behavior. Therefore, for plastic analysis of RC structures, we have to model carefully each plastic behavior of concrete and steel member. But, because of divergency as well as difficulties and dimensions of modelling, it takes a lot of time and labor or sometimes it is impossible to perform plastic analysis of RC structures. In this study, for simplified plastic analysis of RC structures, we propose material transformation method by homogeneous and isotropic material which have the same plastic property as RC. We generate homogeneous and isotropic material showing the same moment-curvature curves (bi-linear stress-strain relation) as RC members, using bi-linear moment-curvature relation by yielding moment, yielding curvature and ultimate moment, ultimate curvature of RC member. Finally, we prove compatibility in the study by comparing plastic analysis results for various analysis models using transformed material models and RC model.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.907-913
• /
• 1998

Corrosion behavior of steel reinforcements embedded in concrete containing various chloride ion concentrations was investigated by an electrochemical impedance spectroscopy(EIS). Chloride ions were introduced into the concrete by dissolving the NaCl and $CaCl_2$ in the water with a given weight of cement. Based on the impedance parameters measured by EIS, more complete equivalent circuit, a schematic physical model, and the mechanism of concrete reinforcement corrosion were suggested. By the implement of experimental impedance parameters obtained from the model with corresponding CNLS-fitting data, the corrosion rate of steel reinforcement with chloride ions could be predicted.

• Journal of Educational Research in Mathematics
• /
• v.20 no.3
• /
• pp.339-356
• /
• 2010

It is important for children to develop statistical reasoning as they think through data. In particular, it is imperative to provide children instructional situations in which they are encouraged to consider variability in data because the ability to reason about variability is fundamental to the development of statistical reasoning. Many researchers argue that even highperforming mathematics students show low levels of statistical reasoning; interventions attending to pedagogical concerns about child ren's statistical reasoning are, thus, necessary. The purpose of this study was to investigate 15 gifted elementary students' various ways of understanding important statistical concepts, with particular attention given to 3 students' reasoning about data that emerged as they engaged in the process of generating and graphing data. Analysis revealed that in recognizing variability in a context involving data, mathematically gifted students did not show any difference from previous results with general students. The authors suggest that our current statistics education may not help elementary students understand variability in their development of statistical reasoning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.879-883
• /
• 2006

본 연구는 현장에서 측정되는 수질데이터를 실시간 수집하여 데이터의 적절성을 모니터링하고 모형입력자료로써 신뢰성을 유지하도록 구성되는 시스템과 이를 2차원 수질 해석 모형인 CE-QUAL W2모형의 입력자료로 연계 활용함으로써 그 결과를 그래프 및 하천 변화 모의 동영상으로 표출하는 시스템을 개발하는데 그 목적이 있다. 수질 모형은 물 관련 모형가운데 특히 다량의 자료와 정확한 자료를 입력자료로 사용하며 그 결과 표출에 있어서도 전체적인 결과부터 세밀한 요소자료까지 결과자료가 필요하다. 본 연구에서 개발한 RTMMS(Real-time Turbidity Monitoring & Modeling System)는 현장 계측기로부터 수집되는 실시간 자료를 이용하여 데이터를 모니터링하고 CE-QUAL W2 모형을 이용하여 모델링을 수행한 후 결과를 그래프로 도출 할 수 있도록 하는 시스템이다. 특히 일반적인 어플리케이션의 GUI 환경에서 벗어나 일반 사용자들이 쉽게 프로그램을 사용할 수 있고 공간 활용도를 높이기 위하여 웹 형식의 GUI로 구성하였다. RTMMS는 기본 크기가 가로 800 픽셀, 세로 600 픽셀로 고정 사이즈이며, 주요 화면 구성으로는 좌측에 네 개의 항목이 있고 우측에는 실시간 모니터링 지점에 대한 유역도가 표시되어 사용자 편의환경을 제공하였다. 사용자는 해당 지점을 선택하여 주요 지점에 대한 정보를 분석할 수 있다. 또한 우측에는 선택된 지점에 대한 정보와 실시간 감시 내용을 조회할 수 있는 탭이 존재한다. 각각의 메뉴 항목은 주요지점의 모니터링 현황을 파악할 수 있는 기능, 수질모형의 입력자료로 변환하도록 하는 자료 동화 기능, CE-QUAL W2 모형을 수행하는 기능 및 결과자료를 분석하는 기능으로 구성되어 있으며, 각 기능을 선택하면 해당 화면으로 GUI가 전환된다. 따라서 다량의 측정자료의 신뢰성을 유지하고 이를 모형의 입력자료로 활용하는 일련의 과정을 시스템화하기 때문에 자료의 이상적 유지 관리가 이루어지며 복잡한 2차원 수질해석 모형을 수월하게 운영할 수 있는 시스템으로 개발하였다.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.459-470
• /
• 2010

The aim of this study were to investigate the process of national R&D project planning by using the industry quantitative analysis(especially supply-chain enterprise ananlysis). In the selection process of funding project, the role and significance of the industry analysis can be identified as the effective guideline of using this methodology. Across the study, the following is noted : the factors of R&D effectiveness and R&D necessity are found reliable and valid. On the other hand, the emptiness of supply chain and the positive effect of foreign trade balance did not influence the selection of project. The information gained from this study will help us to define better expectations and industry analysis employing to the National R&D Project Planning.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.365-372
• /
• 2014

The purpose of the present study is to determine the species of red and green pigments used on paintings of Korean temples and also to compare the two pigments according to the particle characteristics. The component analysis shows that the red pigment consists of cinnabar, hematite, and minium and the green pigment are composed of atacamite, celadonite, and malachite. The result suggests that mixture of various pigments were applied to the painting. When it comes to the particle characteristics, there are various hedral or anhedral shapes such as sharp, long, angular, and platy shapes even in the same cinnabar. In addition, the green pigment also shows a similar pattern with those of the red pigment. Up to now, an identification of minerals has been relied on examination of component and crystal shape. However, it is notable that using form related characteristics can be a better and useful method not only for categorization of pigments which are similar in terms of color and species but also specific index.

• Nuclear Engineering and Technology
• /
• v.5 no.2
• /
• pp.137-149
• /
• 1973

A method of activation analysis, based on the irradiation and counting of an iron wire which contains manganese impurity as the single comparator. has been elaborated by critical evaluation of nuclear data involved in activation and activity measurement. The variation of effective cross section is investigated as a function of the spectral index and other parameters such as a measure of the proportion of epithermal neutrons in the reactor spectrum. The errors induced by shifts in the neutron spectrum in the irradiation positions are discussed. The known amount of each element is irradiated simultaneously together with the single comparator, and the obtained values are compared with the known amount of each element. The results show that en general the random errors are not greater than those obtained by using the conventional relative method, but the systematic errors were up to about 20%. This method is applied to the determinations of fourteen rare earth elements in monazite as well as other seven elements in the standard kale powder. The satisfactory reproducibility of the present method makes possible the determination of the elements with an accuracy attainable with the conventional relative method.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.2
• /
• pp.31-38
• /
• 2002

This paper presents a method for real-time 3D Sumi-e rendering us ing normal graphics hardware. Sumi-e is one of the traditional oriental painting styles. Most research on Sumi-e paintings has focused on 2D or :2.5D Sumi-e brushwork simulation. On these systems. complicated user's hand drawing is required to generate the image of Sumi-e effects. and it can render the 2D or 2.5D Sumi-e images only. We present an automated rendering system for 3D image of Sumi-e painting. It uses 3D common object as an input data and does not need any additional input of user brushwork. Especially for the real-time rendering. hardware-accelerated algorithm for Sumi-e rendering is newly suggested in our system. It is designed with efficiency for customer level graphics hard ware. The results of this paper show that the features of traditional Sumi-e painting are successfully modeled and that 3D Sumi-e painting is rendered in real-time effectively.