• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.257-260
• /
• 2008

This study will make P-M interaction diagram of residual capacity at fire-damaged High strength concrete column with polypropylene fiber. Evaluating capacity of column decreasing spalling with P-M interaction diagram is important. because high strength concrete column with polypropylene fiber isn't section area loss. P-M interaction diagram that is made to analyze according to a various parameters is useful index for design and evaluating capacity of columns. In this study, spalling, temperature distribution of interior column, residual strength and movement of column in eccentric loading are studied with expose time of high temperature. For study fire test that is similar real act, and after cooling in normal condition residual strength of specimen is estimated. And this study use DIANA(Displacement Analyzer) for analyzing nonlinear analysis. with experiment temperature and strength data.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.15-20
• /
• 1998

The furfural, generated by decomposition of insulating paper, the amount of metal in insulating oil, and tano(electrical properties of insulating oil)have been studied for the insulating oil in pole transformer with accelarated thermal aging test. It has been found that tan $\delta$ is affected by adding components of the transformer. The examination of amount of metal, which exhibits catalytic behavior to oxidation of insulating oil, suggested that the amounts of copper increase with degradation time. A comparison between tano and copper amount suggested that the amounts of copper for attention are above 0.2[pp]). Finally, the examination of amount of furfural revealed that the amounts of furfural increase with degradation time. As a consequence, these results could be used for diagnosis of pole transformer.former.

• Journal of Intelligence and Information Systems
• /
• v.4 no.1
• /
• pp.133-147
• /
• 1998

Recently, many researchers have been involved in finding deterministic equations which can accurately predict future event, based on chaotic theory, or fractal theory. The theory says that some events which seem very random but internally deterministic can be accurately predicted by fractal equations. In contrast to the conventional methods, such as AR model, MA, model, or ARIMA model, the fractal equation attempts to discover a deterministic order inherent in time series data set. In discovering deterministic order, researchers have found that neural networks are much more effective than the conventional statistical models. Even though prediction accuracy of the network can be different depending on the topological structure and modification of the algorithms, many researchers asserted that the neural network systems outperforms other systems, because of non-linear behaviour of the network models, mechanisms of massive parallel processing, generalization capability based on adaptive learning. However, recent survey shows that prediction accuracy of the forecasting models can be determined by the model structure and data structures. In the experiments based on actual economic data sets, it was found that the prediction accuracy of the neural network model is similar to the performance level of the conventional forecasting model. Especially, for the data set which is deterministically chaotic, the AR model, a conventional statistical model, was not significantly different from the MLP model, a neural network model. This result shows that the forecasting model. This result shows that the forecasting model a, pp.opriate to a prediction task should be selected based on characteristics of the time series data set. Analysis of the characteristics of the data set was performed by fractal analysis, measurement of Hurst index, and measurement of Lyapunov exponents. As a conclusion, a significant difference was not found in forecasting future events for the time series data which is deterministically chaotic, between a conventional forecasting model and a typical neural network model.

• Genomics & Informatics
• /
• v.2 no.2
• /
• pp.67-74
• /
• 2004

Cells consistently face stressful conditions, which cause them to modulate a variety of intracellular processes and adapt to these environmental changes via regulation of gene expression. Hyperosmotic and oxidative stresses are significant stressors that induce cellular damage, and finally cell death. In this study, oligonucleotide microarrays were employed to investigate mRNA level changes in cells exposed to hyperosmotic or oxidative conditions. In addition, since heat shock protein 70 (HSP70) is one of the most inducible stress proteins and plays pivotal role to protect cells against stressful condition, we performed microarray analysis in HSP70-overexpressing cells to identify the genes expressed in a HSP70-dependent manner. Under hyperosmotic or oxidative stress conditions, a variety of genes showed altered expression. Down­regulation of protein phosphatase1 beta (PP1 beta) and sphingosine-1-phosphate phosphatase 1 (SPPase1) was detected in both stress conditions. Microarray analysis of HSP70-overexpressing cells demonstrated that diverse mRNA species depend on the level of cellular HSP70. Genes encoding Iysyl oxidase, thrombospondin 1, and procollagen displayed altered expression in all tested conditions. The results of this study will be useful to construct networks of stress response genes.

• BMB Reports
• /
• v.33 no.6
• /
• pp.493-498
• /
• 2000

Aquifex pyrophilus, a hyperthermophilic bacterium, has a serine-type protease that is located at the cell wall fraction with a mature size of 43 kDa. Molecular cloning of the protease gene revealed that it has an ORF of 619 amino acids with homologous catalytic site of serine-type proteases [Choi, I.-G., Bang, W.-K., Kim, S.-H., Yu, G. Y., J. Biol. Chem. (1999), Vol. 274, pp. 881-888]. Constructs containing different regions of the protease gene, including a alanine-substituted mutant at the active site serine, were constructed, and the factors affecting the expression level of the cloned protease gene in E. coli were examined. The presence of the C-terminus hydrophobic region of the protease hindered over-expression in E. coli. Also, the proteolytic activity of the expressed protein appeared to toxic to E. coli. An inactive form that deleted both of the N-terminal signal sequence and the C-terminal polar residues was over-expressed in a soluble form, purified to homogeneity, and its thermostability examined. The purified protein showed three disulfide bonds and three free sulfhydryl group. The thermal denaturation temperature of the protein was measured around $90^{\circ}C$ using a differential scanning calorimeter and circular dichroism spectrometry. The disulfide bonds were hardly reduced in the presence of reducing agents, suggesting that these disulfide bonds were located inside of the protein surface.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.162-167
• /
• 2012

Surface modification of macromolecules renders a progressive and favorable method to enhance the properties of polymeric materials and improves conductivity, wettability, stability, adhesion, antibacterial properties, etc. of polymeric surfaces without deterioration of the polymer bulk properties. Polyolefins such as polyethylene and polypropylene were grafted with maleic anhydride(MAH) as a functional monomer in solution. Evidence for grafting was shown with FTIR measurement. The grafting ratio was determined from chemical titration. The higher MAH loading, the lower contact angle(${\theta}$) was obtained. With the increasing content of MAH, melting temperature($T_m$) of maleic anhydride grafted polymer decreased while decomposition temperature($T_d$) of maleic anhydride grafted polymer increased.

• Plant Resources
• /
• v.3 no.2
• /
• pp.105-109
• /
• 2000

This study was carried out to find a useful mushroom at Chungnam Agricultural Research And Extention Service. Twenty materials used were collected from domestic and exotic area. These races were compared bontanical characteristics to leading varieties by PCR-RAPD methods. Mycelial growth temperature of Chongpung and Myongwol were at 20 to 25 $^{\circ}C$ and 25 to 30 $^{\circ}C$ at PDA medium, respectively mycelial growth of these varieties were similiar at pH 6.5 to 7.5. In case of mushroom cultivation temperature ranges, Chongpung was at 5 to 26$^{\circ}C$ and Myongwol was at 7 to 28$^{\circ}C$, but the optimum temperature range of these were appeared at 15 to 19$^{\circ}C$. Culture temperature of these was 23$^{\circ}C$ and period of mycelial culture was needed 23 to 24 days under 850cc/pp, while was needed 11 to 12 days at waste cotton medium. Cap color of these at first inducing mushroom was all dark blue, but at late growing stages Chongpung was shown as grey, and Myongwol was shown as dark grey. Yield of Chongpung was appeared as 46kg/3.3$m^2$ and that of Myongwol was 41kg /3.3$m^2$, while Chunchu No2 as check was 40kg/3.3$m^2$. Results from PDA medium and PCR-RAPD analysis two of these were different from others.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.500-506
• /
• 2013

The effect of compatibilizer types on the properties of polyphenylene sulfide (PPS)/polyethylene terephthalate (PET) blends was investigated. The blends were extruded by a single screw extruder attached with a Maddock mixing zone and their molded properties were examined. As a basic blend composition, a linear PPS/PET (40/60) blend was selected based on cost efficiency. Three types of compatibilizer, SEBS, modified SEBS, and modified PS were added to the basic blend to improve the properties. The thermal, rheological, mechanical properties and the morphology of the ternary blends were analyzed. The maximum mechanical properties of blends was found at 1 phr of m-SEBS or m-PS content, whose values were almost the same as the theoretical values of miscible blend system. It seemed to by the case that the partial reaction between compatibilizer and the basic blend caused the enhancement of compatibility between linear PPS and PET phases. These ternary blends would be applicable as economic linear PPS alloys.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.351-359
• /
• 2011

For advanced drinking water treatment of high turbidity water, we used the hybrid process that was composed of photocatalyst packing in space of between outside of multi-channel ceramic microfiltration membrane and membrane module inside. Photocatalyst was polypropylene (PP) beads coated $TiO_2$ powder by CVD (chemical vapor deposition) process. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, standard NOM solution was prepared with humic acid and kaolin. Water-back-flushing of 10 sec was performed per every period of 10 min to minimize membrane fouling. Resistance of membrane fouling ($R_f$) increased and J decreased as concentration of humic acid changed from 2 mg/L to 10 mg/L, and finally the highest total permeate volume ($V_T$) could be obtained at 2 mg/L. Then, treatment efficiency of turbidity and $UV_{254}$ absorbance were above 96.4% and 78.9%, respectively. As results of treatment portions by membrane filtration, photocatalyst adsorption, and photo-oxidation in (MF), (MF + $TiO_2$), (MF + $TiO_2$ + UV) processes, turbidity was treated little by photocatalyst adsorption, and photo-oxidation. However, treatment portions of $UV_{254}$ absorbance by adsorption (MF + $TiO_2$) and photo-oxidation (MF + $TiO_2$ + UV) at humic acid of 4 mg/L and 6 mg/L were above 9.0, 9.5 and 8.1, 10.9%, respectively.

• Journal of Microbiology
• /
• v.40 no.2
• /
• pp.140-145
• /
• 2002

The 5.8 kb pMMH1, rolling-circle replication (RCR) plasmid of the wild type soil Bacillus mesentericus was developed into a novel secretion vector system in Bacillus subtilis. The pMMHl turned out to have a replication origin and two open reading frames (ORFs) of the putative γ-GTP and type I signal peptidase (sipP). To characterize the regions necessary for plasmid stability and high copy number, five vectors (pPS, pPP, pEN, pMN, pME) were constructed by disruption or deletion of each region in pMMH1. Like pMMHl all constructed vectors were stable over 100 generations In a non-selective medium. Since pPS was the smallest (2.3 kb)of all, it was selected for the construction of a navel secretion vector, Using the $\alpha$-amylase promoter/signal sequence of B. subtilils the novel plasmid pJSN was constructed. When $\beta$-glucosidase was expressed using pJSN, we found $\beta$-glucosidase activity in the medium. This result strongly suggested that plasmid pJSN can be used for the production of bioactive peptides in B. subtilis.