• Journal of applied mathematics & informatics
• /
• v.9 no.1
• /
• pp.185-195
• /
• 2002

Previous research has shown that the flow of patients around departments of geriatric medicine and ex-patients in the community may be-modelled by the application of a mixed-exponential distribution. In this proper we considered a ave-compartment model using a continuous-time Markov process to describe the flow of patients. Using a M/ph/c queuing model, we present a way of optimizing the number of beds in order to maintain an acceptable delay probability a sufficiently low level. Finally, we constructed a Java computer simulation, using data from St George's Hospital, London.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2385-2389
• /
• 2008

This is the experimental research that tries to explain a variety of RH is how to affect the cell performance and the flooding phenomenon of proton exchange membrane fuel cell (PEMFC). A value of PH changes to 0%, 50% and 90% as its variation, either stoichiometric flow rate changes to 1.5, 2 and 4. Into the comparison between theoretical and experimental value, this study analyzes that a variety of PH is how 10 affect flooding in the cathode of the proton exchange membrane fuel cell. The effect of air stoichiometry, air humidity and different flow fields are also discussed in this paper This study has accomplished the measurement of performance as the variety of RH in the cathode of proton exchange membrane fuel cell, moreover it has recorded the visualization of flooding in the cathode with a high-speed micro camera.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.33-40
• /
• 2007

A multi-server queueing system with finite buffer is considered. The input flow is the BMAP (Batch Markovian Arrival Process). The service time has the PH (Phase) type distribution. Customers from the BMAP enter the system according to the discipline of partial admission. Besides ordinary (positive) customers, the Markovian flow (MAP) of negative customers arrives to the system. A negative customer can delete an ordinary customer in service if the state of its PH-service process belongs to some given set. In opposite case the ordinary customer is considered to be protected of the effect of negative customers. The stationary distribution and the main performance measures of the considered queueing system are calculated.

• Journal of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.347-355
• /
• 1970

The state of carrier-free yttrium-90 has been studied by filtration method with membrane filters. The studies include the adsorption ratio of carrier-free yttrium-90 on membrane filters by the change of PH, concentration of yttrium-90, and the pore size of member filters. The adsorption followed to Freundlich adsorption isotherm. The adsorption mechanism was proposed by the adsorption of transient state as an ionic form of $Y^{3+}$, and the experimental results were explained satisfactorily by the proposal. The adsorbed state of yttrium was present in the forms of yttrium such as $Y^{3+},\;Y(OH)^{3+},\;Y(OH)^{2+},\;Y(OH)^+_3,\;and\;Y(OH)_3$,and the existing ratios of the forms of yttrium were sharply changed by PH. It seems to be valid tha the carrier-free yttrium-90 exists mostly in $Y^{3+}$ state.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.40-48
• /
• 2004

Hardness and internal stress are very important in nickel electroforming. Nickel sulfamate bath has been widely used in electroforming because of its low internal stress and moderate hardness. Nickel sulfamate bath without chloride was chosen to investigated the effect of plating variable such as temperature, PH, current density and sodium naphthalene trisulfonate as addition agent on the hardness and internal stress. It was found that hardness increased with increasing temperature and decreasing current density and ranged from 150∼310 DPH. The hardness was highest at $55^{\circ}C$ and 10∼40 mA/$\textrm{cm}^2$. The internal stress increased with increasing current density and decreasing temperature. It was minimum at PH 3.0∼3.8. Low internal stress within $\pm$1,500 psi was obtained at both $50^{\circ}C$ and $55^{\circ}C$ in 10-20 mA/$\textrm{cm}^2$. The addition of sodium naphthalene trisulfonate was found to be effective in refine columnar grains thus resulted in decreasing internal stress, increasing hardness and improving brightness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.8
• /
• pp.1248-1253
• /
• 2002

Coocus laccae(Laccifer lacca Kerr), usually known as Lac, is a kind of cocoon which is parasitic on the tree around India and China. It contains the laconic acid of red colored dyes and has been used for cosmetic or natural dyeing prior to the introduction of New World cochineal. Nevertheless, the characterization of lac has not been studied, very little informed. The purpose of this study is to examine the effects of dyeing conditions fur Lac extract, such as pH of dye bath, concentration of Lac exact dyeing temperature and time, to find out the optimum conditions. The results were as follow. 1. The highest K/S values of the silk and wool was shown at PH 3 and PH 4. 2. K/S values of the silk came to nearly the adsorption equilibrium state at 40$^{\circ}C$ and the curve of wool showed a dramatic increase with the increase of temperature. 3. Dyed silk and wool fabrics showed good light fastness without using mordants.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1119-1121
• /
• 1993

The PSN-PT-PZ ceramics doped with the Mn-oxide(0.5wt%) were fabricated by the mixed oxide method at 1250($^{\circ}C$) for 2(hr) and then the dielectric and pyroelectric properties were investigated with the compositions. In the 0.05PSN-0.4PT-0.55PZ specimen with 0.5(wt%) $MnO_2$, the pyroelectric coefficient was $6.6{\times}10^{-8}(C/Cm^2^{\circ}C)$, and the figure of merits for pyroelectric current and voltage were $27{\times}10^{-9},\;45{\times}10^{-12}$(C.Cm/J), respectibly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.83-84
• /
• 2006

ITO/4, 4', 4"-tris (N -3 - methylphenyl - N - phenyl - amino) - triphenylamine, [m-MTDATA] / Terbium Iris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$] / Mg:Ag devices were made to investigate its electrical and light emission properties. The thickness of m-MTOATA layer was varied from 0 to 80 nm. There was a threshold thickness for the sufficient hole injection. The insertion of 20 nm thick m-MTDATA layer between ITO and Tb-complex resulted in the right shift of current-voltage curve because of the insufficient hole injection. The low operating voltage can be obtained above the 40 nm of m-MTDATA layer. The insertion of m-MTDATA induced the increase of the background in the electroluminescence spectrum which was dependent on the current density of the devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.412-413
• /
• 2006

The electrical conduction mechanism of ITO / Terbium tris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$]/Mg/Al devices has been investigated. The calculation of electric field in single layer organic layer between cathode and anode shows the uniform distribution for the electron injection barrier of over 1.4 eV. The measured current-voltage curve shows well matching with the calculated curve based on the tunneling injection of electron under the uniform distribution of electric field.

• Communications for Statistical Applications and Methods
• /
• v.27 no.4
• /
• pp.469-486
• /
• 2020

Entropy is an important term in statistical mechanics that was originally defined in the second law of thermodynamics. In this paper, we consider the maximum likelihood estimation (MLE), maximum product spacings estimation (MPSE) and Bayesian estimation of the entropy of an inverse Weibull distribution (InW) under a generalized type I progressive hybrid censoring scheme (GePH). The MLE and MPSE of the entropy cannot be obtained in closed form; therefore, we propose using the Newton-Raphson algorithm to solve it. Further, the Bayesian estimators for the entropy of InW based on squared error loss function (SqL), precautionary loss function (PrL), general entropy loss function (GeL) and linex loss function (LiL) are derived. In addition, we derive the Lindley's approximate method (LiA) of the Bayesian estimates. Monte Carlo simulations are conducted to compare the results among MLE, MPSE, and Bayesian estimators. A real data set based on the GePH is also analyzed for illustrative purposes.