• 정보보호학회논문지
• /
• 제7권4호
• /
• pp.127-132
• /
• 1997

본 논문은 유한체 GF(p)에서 r=2p+1이 2-prime이고, p에 대한 위수(order) m을 가질때, q=r$^{e}$ (e$2)를 연결 정수로 갖는 FCSR의 생성된 출력수열에 대한 선형 복잡도의 하한을 구한다.

• 한국의류학회지
• /
• 제32권8호
• /
• pp.1274-1285
• /
• 2008

The purpose of this study is to investigate influences of perceived price dimensions and store attributes on store choice behavior. Three major retail formats, department store, discount store, and internet shopping mall in retail industry were compared with respect to store attributes and intention to purchase fashion products. Data were obtained from 427 consumers aged 25-49 years old. The results were as follows. (1) Multidimensional aspects of the price construct were identified: price-quality schema, prestige sensitivity, price mavenism, value consciousness, price consciousness, and sales proneness. (2) Store attributes included product assortment, quality per price (Q/P), service, and symbolic image in general. However, store attribute factors of three retail formats consisted of slightly different items. Department stores presented the highest level of mean scores on product quality, customer service, and symbolic images, while internet mall exhibited highest on product variety, information comparison, and quality per price. (3) Respondents presented high level of intention to purchase fashion products at internet mall, department store, and discount store in that order. (4) Purchase intention at department store was predicted by Q/P, service, symbolic image, prestige sensitivity, product assortment, clothing consumption, and age in order. Purchase intention at discount store was influenced by assortment & Q/P, symbolic image, clothing consumption, and sales proneness, whereas internet mall was predicted by product assortment, Q/P, service, price mavenism, and price-quality schema.

• The Korean Journal of Physiology
• /
• 제24권1호
• /
• pp.51-65
• /
• 1990

The purpose of the present study was to examine the hemodynamic responses, especially in arterial and skin blood flows, in conjunction with the changes of plasma catecholamine levels as an indirect marker of adrenergic tone during the early stage of head-down tilt (HDT), and to evaluate the early physiological regulatory mechanism in simulated weightlessness. Ten mongrel dogs, weighing8\;{\sim}\;14\;kg, were intravenously anesthetized with nembutal, and postural changes were performed by using the tilting table. The postural changes were performed in the following order: supine, prone, HDT $(-6^{\circ}C)$ and lastly recovery prone position. The duration of each position was 30 minutes. The measurements were made before, during and after each postural change. The arterial blood flow $({\.{Q}})$ at the left common carotid and right brachial arteries was measured by the electromagnetic flowmeter. Blood pressure (BP) was directly measured by pressure transducer in the left brachial artery. To evaluate the peripheral blood flow, skin blood flow $({\.{Q}})$ was calculated by the percent changes of photoelectric pulse amplitude on the forepaw, and skin temperature was recorded. The peripheral vascular resistance (PR) was calculated by dividing respective mean BP values by ${\.{Q}}$ of both sides of common carotid and brachial arteries. Heart rate (HR), respiratory rate (f) and PH, $Po_{2},\;Pco_{2}$ and hematocrit of arterial and venous blood were also measured. The concentration of plasma epinephrine and norepinephrine was measured by radioenzymatic method. The results are summarized as follows: Tilting to head-down position from prone position, HR was initially increased (p<0.05) and BP was not significantly changed. While ${\.{Q}}$ of the common carotid artery was decreased (p<0.05) and PR through the head was increased, ${\.{Q}}$ of the brachial artery was increased (p<0.05) and PR through forelimbs was decreased. ${\.{Q}}$ of the forepaw was initially increased (p<0.05) and then slightly decreased, on the whole revealing an increasing trend. Plasma norepinephrine was slightly decreased and the epinephrine was slightly increased. f was increased and arterial pH was increased (p<0.05). In conclusion, the central blood pooling during HDT shows an increased HR via Bainbridge reflex and an increased ${\.{Q}}$ of the forepaw and brachial ${\.{Q}}$, due to decreased PR which may be originated from the depressor reflex of cardiopulmonary baroreceptors. It is suggested that the blood flow to the brain was adequately regulated throughout HDT $(-6^{\circ}C)$ in spite of central blood pooling. And it is apparent that the changes of plasma norepinephrine level are inversely proportional to those of ${\.{Q}}$ of the forepaw, and the changes of epinephrine level are paralleled with those of the brachial ${\.{Q}}$.

• 한국지반환경공학회 논문집
• /
• 제13권4호
• /
• pp.37-44
• /
• 2012

본 연구는 모래, HAP, Zeolite, 혼합여재에 의한 비점오염원 흡착 반응을 조사하였다. 오수에 대한 모래, HAP, Zeolite와 혼합여재의 흡착은 연속적인 회분식 실험을 통해 조사하였다. 회분식 실험 후 COD, T-N, T-P를 통하여 분석하였다. kinetic model은 유사 1차반응을 통해 분석하였다. Langmuir와 Freundlich isotherm model을 사용하여 적용성을 조사하였다. COD 최대흡착량$(Q_{max})$의 값은 각각 모래 0.0511mg/g, HAP 0.1905mg/g, Zeolite 1.0366mg/g, Mixed media 0.7444mg/g T-N 최대흡착량$(Q_{max})$의 값은 각각 모래 0.0159mg/g, HAP 0.0537mg/g, Zeolite 0.5496mg/g, Mixed media 0.1374mg/g T-P 최대흡착량$(Q_{max})$의 값은 각각 모래 0.0202mg/g, HAP 0.1342mg/g, Zeolite 0.0462mg/g, Mixed media 0.1180mg/g 나타났다. 결과적으로 혼합여재는 비점오염원을 효과적으로 제거하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.156-156
• /
• 2000

The piezoelectric properties and the doping effect for $0.95Pb(Zr_xTi_{l-x})O_3+0.O5Pb(Mn_{1/3}Nb_{2/3})O_3$compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the value of $k_p$ and ${\varepsilon}_{33}^T$ were maximized, but $Q_m$ was minimized $(k_p=0.57, Q_m=1550)$ in the composition of x=0.51. In order to increase the values of $Q_m$, $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of $k_p$ decreased, and the values of $Q_m$ increased with doping concentration of $Nb_2O_5$ . As a experiment results under high electric field driving, when vibration velocity was ower than 0.6[m/s], the temperature increase was 20[℃], and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• Kyungpook Mathematical Journal
• /
• 제61권1호
• /
• pp.1-10
• /
• 2021

This paper is concerned the finite time blow-up of solution for higher-order nonlinear Kirchhoff-type equation with a degenerate term and a source term. By an appropriate Lyapunov inequality, we prove the finite time blow-up of solution for equation (1.1) as a suitable conditions and the initial data satisfying ||Dmu0|| > B-(p+2)/(p-2q), E(0) < E1.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.64-70
• /
• 2010

This paper presents how to decide on tuning factor(${\delta}$) and quality factor(Q) values in design of single-tuned passive harmonic filters. Tuning factor(${\delta}$) and quality factor(Q) values have to consider before decision on circuit parameters of passive filters. A Study on these two value has not been scarcely performed and only experienced values has been used in passive harmonic filter design by far. As a experienced value, in cases of 5th and 7th filter, tuning factor(${\delta}$) is about 0.94 and 0.96 respectively and quality factor(Q) is, in all cases of, 50. If Single-tuned passive harmonic filter will be off-tuned, performance of filter will be decreased steeply and occur to parallel resonance between system reactance and filter capacitance. Therefore During the operation, In order not to off-tuning, Filter must be tuned at former order than actual tuning order. This is the same that total impedance of filter must have a reactive impedance. In this paper, Tuning factor(${\delta}$) is decided via example of real system and using the bode-plot and then performance of filters confirmed by filter current absorbtion rate. And Quality factor(Q) decided using the bode plot in example system and then performance of filters confirmed by filter current absorbtion rate also, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. Finally, Performance of the designed passive harmonic filter using the tuning factor(${\delta}$) and quality factor(Q) values, decided in this paper is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th current harmonic distortions are decreased within IEEE-519 distortion limits, respectively.

• 환경영향평가
• /
• 제8권3호
• /
• pp.49-59
• /
• 1999

In this study, we individualize the clauses to sort out the troubled ones, draw up a interrelation model in order to visually organize the relations, and finally, suggest the desirable application idea. The interrelation model suggested in this study has been made based on the matrix method. On this matrix, we arranged the environmental factors on horizontal and vertical axis, and when we describe the relation of each factors, we set the horizontal axis as the base and divided the content into three grades : Fine, Medium, and Poor. In addition to that, we expressed those three grades into numerical value like 3 points for Level Fine, 2 points for Level Medium, and 1 point for Level Poor and then, we converted this numerical values into index numbers. We could classify the index numbers such as AS, PS, Q-index, P-index. AS is an index numerically shows the degree of giving environmental effect, PS is an index numerically shows the degree of receiving environmental effect, Q-index is an index shows the aggravate degree, and P-index shows the relation degree. The Q/P-index with large numbers has considerable effect on the environmental system, while the small numbered Q/P-index barely effect on the environmental system. Moreover, we classified the environmental factors into 5 levels(I~V) according to the relations between the Q-index and P-index. Level I is less affected by the environment and has more giving effect, while Level V is more sensitively affected by the environment and has more receiving effect, which we considered important. Therefore, we could come up with the result that if we consider the each level of factors when we evaluate the EIA, the result would be far more accurate and reliable since it contains mutual relation aspect of EIA. The suggested interrelation model in this thesis is presentable as one of those scoping system. We highly believe the need of scoping system in EIA and suggest the interrelation model as the alternative idea for scoping system.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.293-299
• /
• 2009

The microstructures and mechanical properties of Dual Phase (DP), Transformation-Induced Plasticity (TRIP), and Quenching & Partitioning (Q&P) steels were investigated in order to define the strengthening mechanism of 0.2 C steel. An intercritical annealing between Ac1 and Ac3 was conducted to produce DP and TRIP steel, followed by quenching the DP and TRIP steel being quenched at to room temperature and by the TRIP steel being austemperingaustempered-air cooling cooled the steel toat room temperature, respectively. The Q&P steel was produced from full austenization, followed by quenching to the temperature between $M_s$ and $M_f$, and then enriching the carbon to stabilize the austenite throughout the heat treatment. For the DP and TRIP steels, as the intercritical annealing temperature increased, the tensile strength increased and the elongation decreased. The strength variation was due to the amount of hard phases, i.e., martensite and bainite, respectively in the DP and TRIP steels. It was also found that the elongation also decreased with the amount of soft ferrite in the DP and TRIP steels and with the amount of the that was retained in the austenite phasein the TRIP steel, respectively for the DP and TRIP steels. For the Q&P steel, as the partitioning time increased, the elongation and the tensile strength increased slightly. This was due to the stabilized austenite that was enriched with carbon, even when the amount of retained austenite decreased as the partitioning time increased from 30 seconds to 100 seconds.

• 한국조경학회지
• /
• 제28권3호
• /
• pp.13-24
• /
• 2000

In urban area, urban forests work as an ecological center that mitigates the environmental pollution of the area. In order to maintain the ecological function of a forest, the management method should be established based on ht through investigation of the vegetation structure of the forest. In this study, the vegetation structure of Namsan in Kyungju area was investigated in order to study the ecological value of Namsan and to suggest a desirable management alternative. 21 plots were selected as survey areas. Using the TWINSPAN technique, the forest of Namsan was classified into four communities: Quercus serrata community(I), Castanea crenata-Q. serrata-Q. mongolica community(II), Pinus densiflora community(III) and P. densiflora-P. rigida-Robinia pseudoacacia community(IV). The survey results were summarized by five: 1) the distribution of vegetation showed 2) P. densiflora was the absolutely dominant species in Namsan, 3) number of the average species was 12.6$^{\circ}$$\pm$3.1, 4) number of individual was 131.1$^{\circ}$$\pm$47.8 per a plot(100$m^2$), 5) the results of annual ring analysis revealed that the age of P. densiflora in Namsan was about 3 0$^{\circ}$~60$^{\circ}$years old. From the above results, it was found out that the forest has two problems. One thing is maintenance of P.densiflora against succession, another is artificial forest dispersion. The problems of Namsan forest management will be solved with further studies related.