• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.75-86
• /
• 2009

Salt, one of the most common soluble materials in engineering soil, may have an effect on mechanical behaviors of soils under its cementation process. In order to investigate this natural phenomenon, non-soluble material by using glass beads is mixed with salt electrolyte and cemented by using oven to evaporate water. Three different sizes of glass bead particles, 0.26, 0.5, and 1.29 mm, with different salt concentration, 0, 0.1, 0.2, 0.5, 1.0, and 2.0M, are explored by using P- and S-waves, excited by bender elements and piezo disk elemets, respectively. The velocities of the P-wave and S-wave of the particulate medium cemented by salt show three stages with the degree of saturation: 1) S-wave velocities increase while P-wave velocities reduce with degree of saturation changing from 100% to 90%; 2) Both velocities are stable with degree of saturation varying from 90% to 10%; 3) The velocities change enormously when the specimens are nearly dry with degree of saturation from 10% to 0%. Besides, the resonance frequencies of S-wave show similar stages to the S-wave velocities. This study demonstrates meaningful trends of elastic wave characteristics of geo-materials according to the cementation of dissolved salt.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.17-23
• /
• 2008

Purpose : Because there is a difference depending on the environment as for an inspection equipment the important part of bone density scan and the precision/accuracy of a tester, the management of quality must be made systematically. The equipment failure caused by overload effect due to the aged equipment and the increase of a patient was made frequently. Thus, the replacement of equipment and additional purchases of new bonedensity equipment caused a compatibility problem in tracking patients. This study wants to know whether the clinical changes of patient's bonedensity can be accurately and precisely reflected when used it compatiblly like the existing equipment after equipment replacement and expansion. Materials and methods : Two equipments of GE Lunar Prodigy Advance(P1 and P2) and the Phantom HOLOGIC Spine Road(HSP) were used to measure equipment precision. Each device scans 20 times so that precision data was acquired from the phantom(Group 1). The precision of a tester was measured by shooting twice the same patient, every 15 members from each of the target equipment in 120 women(average age 48.78, 20-60 years old)(Group 2). In addition, the measurement of the precision of a tester and the cross-calibration data were made by scanning 20 times in each of the equipment using HSP, based on the data obtained from the management of quality using phantom(ASP) every morning (Group 3). The same patient was shot only once in one equipment alternately to make the measurement of the precision of a tester and the cross-calibration data in 120 women(average age 48.78, 20-60 years old)(Group 4). Results : It is steady equipment according to daily Q.C Data with $0.996\;g/cm^2$, change value(%CV) 0.08. The mean${\pm}$SD and a %CV price are ALP in Group 1(P1 : $1.064{\pm}0.002\;g/cm^2$, $%CV=0.190\;g/cm^2$, P2 : $1.061{\pm}0.003\;g/cm^2$, %CV=0.192). The mean${\pm}$SD and a %CV price are P1 : $1.187{\pm}0.002\;g/cm^2$, $%CV=0.164\;g/cm^2$, P2 : $1.198{\pm}0.002\;g/cm^2$, %CV=0.163 in Group 2. The average error${\pm}$2SD and %CV are P1 - (spine: $0.001{\pm}0.03\;g/cm^2$, %CV=0.94, Femur: $0.001{\pm}0.019\;g/cm^2$, %CV=0.96), P2 - (spine: $0.002{\pm}0.018\;g/cm^2$, %CV=0.55, Femur: $0.001{\pm}0.013\;g/cm^2$, %CV=0.48) in Group 3. The average error${\pm}2SD$, %CV, and r value was spine : $0.006{\pm}0.024\;g/cm^2$, %CV=0.86, r=0.995, Femur: $0{\pm}0.014\;g/cm^2$, %CV=0.54, r=0.998 in Group 4. Conclusion: Both LUNAR ASP CV% and HOLOGIC Spine Phantom are included in the normal range of error of ${\pm}2%$ defined in ISCD. BMD measurement keeps a relatively constant value, so showing excellent repeatability. The Phantom has homogeneous characteristics, but it has limitations to reflect the clinical part including variations in patient's body weight or body fat. As a result, it is believed that quality control using Phantom will be useful to check mis-calibration of the equipment used. A value measured a patient two times with one equipment, and that of double-crossed two equipment are all included within 2SD Value in the Bland - Altman Graph compared results of Group 3 with Group 4. The r value of 0.99 or higher in Linear regression analysis(Regression Analysis) indicated high precision and correlation. Therefore, it revealed that two compatible equipment did not affect in tracking the patients. Regular testing equipment and capabilities of a tester, then appropriate calibration will have to be achieved in order to calculate confidential BMD.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.105-119
• /
• 1976

Sucrose, glucose, starches hydrolyzates and raw starchy materials hydrolyzates were caramelized using various catalysis and the caramel products were analysed, in order to carry out the basic research for the replacement of caramel coloring. The results obtained were summarized as follows. 1. The caramel which was manufactured by sucrose syrup being pH 3.5 adjusted by sulfuric acid showed strong color intensity and hue as well as good stability in the solutions of table salt, tannin and alcohol. 2. The product caramelized from sucrose syrup being pH 9.5 adjusted by sodium carbonate showed very strong color intensity and black color component, and was quite stable in alcohol solution but not in table salt and tannin solutions. 3. The caramel products made from sucrose syrup using ammonium salts of strong acid like $NH_4Cl$ and $(NH_4)_2SO_4$ as catalyst showed strong color intensity and black color component but hazy apparence in solution of table salt, tannin and alcohol. 4. The product caramelized from glucose syrup being pH 9.5 adjusted by sodium carbonate indicated strong color intensity but weak red color component and was transparent in solution of table salt and alcohol but hazy in tannin solution. 5. In glucose caramel using $NH_4Cl$, $(NH_4)_2SO_4$, $(NH_4)_2CO_3$ and $(NH_4)_2SO_3$ as catalyst, $NH_4Cl$ plot was very weak in color intensity and insufficient in red color component but stable in solution of table salt, tannin and alcohol. In the case of $(NH_4)_2CO_3$, $(NH_4)_2SO_4$ and $(NH_4)_2SO_3$ plots, all products were strong in color intensity but little insufficient in red color component. On the stability in solutions, $(NH_4)_2SO_3$ plot was stable in two solutions expect tannin solution, $(NH_4)_2CO_3$ plot was only stable in alcohol solution and $(NH_4)_2SO_3$ plot was only stable in table salt solution. 6. When the acid hydrolyzed starch syrups without neutralization were caramelized using $(NH_4)_2SO_4$ as catalyst, the potato starch hydrolyzate caramel showed higher in color intensity being similar to its of glucose caramel than sweet potato starch hydrolyzate caramel and corn starch hydrolyzate caramel. 7. Dried sweet potato powder, dried acorns powders, the acorns (from Q. serrata THUNB and Q. acutissima CARR.) powders extracted with water for 7 days and with 50% alcohol solution for 24 hrs were hydrolyzed by sulfuric acid in autoclave at $3.5kg/cm^2$ as pressure for 60 mins, and were caramelized using $(NH_4)_2SO_4$ as catalyst. It was supposed that all of those products were poor quality on color and stability in solutions at the viewpoint of food coloring matter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.642-642
• /
• 2013

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as high electron mobility, high thermal conductivity and optical transparency. Especially, chemical vapor deposition (CVD) grown graphene has been used as a promising material for high quality and large-scale graphene film. Unfortunately, although CVD-grown graphene has strong advantages, application of the CVD-grown graphene is limited due to ineffective transfer process that delivers the graphene onto a desired substrate by using polymer support layer such as PMMA(polymethyl methacrylate). The transferred CVD-grown graphene has serious drawback due to remaining polymeric residues generated during transfer process, which induces the poor physical and electrical characteristics by a p-doping effect and impurity scattering. To solve such issue incurred during polymer transfer process of CVD-grown graphene, various approaches including thermal annealing, chemical cleaning, mechanical cleaning have been tried but were not successful in getting rid of polymeric residues. On the other hand, lithographical patterning of graphene is an essential step in any form of microelectronic processing and most of conventional lithographic techniques employ photoresist for the definition of graphene patterns on substrates. But, application of photoresist is undesirable because of the presence of residual polymers that contaminate the graphene surface consistent with the effects generated during transfer process. Therefore, in order to fully utilize the excellent properties of CVD-grown graphene, new approach of transfer and patterning techniques which can avoid polymeric residue problem needs to be developed. In this work, we carried out transfer and patterning process simultaneously with no polymeric residue by using a metal etch mask. The patterned thin gold layer was deposited on CVD-grown graphene instead of photoresists in order to make much cleaner and smoother surface and then transferred onto a desired substrate with PMMA, which does not directly contact with graphene surface. We compare the surface properties and patterning morphology of graphene by scanning electron microscopy (SEM), atomic force microscopy(AFM) and Raman spectroscopy. Comparison with the effect of residual polymer and metal on performance of graphene FET will be discussed.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.171-176
• /
• 2008

The comparative molecular similarity indices analysis (CoMSIA) models between 3${\beta}$-Hydroxy-12-oleanen-28-oic acid (1-30) analogues as substrate molecule and their inhibitory activities ($pI_{50}$) against protein tyrosine phosphatase (PTP)-1B were derived and discussed quantitatively. Listing in order, the CoMFA>CoMSIA${\geq}$HQSAR>2D-QSAR model, these QSAR models had the better statistical values. The optimized CoMSIA F1 model at grid 3.0${\AA}$ had the best predictability and fitness ($q^2$=0.754 and $r^2$=0.976) by field fit alignment. The order of contribution ratio (%) of CoMSIA fields concerning the inhibitory activities was a H-bond acceptor (48.9%), steric field (25.8%) and hydrophobic field (25.4%), respectively. Therefore, the inhibitory activities of substrate molecules against PTP-1B were dependent upon H-bond acceptor field (A) of $R_4$-group. From the analytical results of CoMSIA contour maps, oleanolic acid derivatives will have better inhibition activities if $R_1$ group has H-bond acceptor disfavor, $R_3$group has steric disfavor and $R_4$ group has steric, hydrophobic, H-bond favor.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1690-1698
• /
• 2006

In order to investigate the effect of dissolved oxygen (DO) level on AVM $B_{1a}$ production by a high yielding mutant of Streptomyces avermitilis, five sets of bioreactor cultures were performed under variously controlled DO levels. Using an online computer control system, the agitation speed and aeration rate were automatically controlled in an adaptive manner, responding timely to the oxygen requirement of the producer microorganism. In the two cultures of DO limitation, the onset of AVM $B_{1a}$ biosynthesis was observed to casually coincide with the fermentation time when oxygen-limited conditions were overcome by the producing microorganism. In contrast, this phenomenon did not occur in the parallel fermentations with DO levels controlled at around 30% and 40% throughout the entire fermentation period, showing an almost growth-associated mode of AVM $B_{1a}$ production: AVM $B_{1a}$ biosynthesis under the environments of high DO levels started much earlier than the corresponding oxygen-limited cultures, leading to a significant enhancement of AVM $B_{1a}$ production during the exponential stage. Consequently, approximately 6-fold and 9-fold increases in the final AVM $B_{1a}$ production were obtained in 30% and 40% DO-controlled fermentations, respectively, especially when compared with the culture of severe DO limitation (the culture with 0% DO level during the exponential phase). The production yield ($Y_{p/x}$), volumetric production rate (Qp), and specific production rate (${\bar{q}}_p$) of the 40% DO-controlled culture were observed to be 14%, 15%, and 15% higher, respectively, than those of the parallel cultures that were performed under an excessive agitation speed (350 rpm) and aeration rate (1 vvm) to maintain sufficiently high DO levels throughout the entire fermentation period. These results suggest that high shear damage of the high-yielding strain due to an excessive agitation speed is the primary reason for the reduction of the AVM $B_{1a}$ biosynthetic capability of the producer. As for the cell growth, exponential growth patterns during the initial 3 days were observed in the fermentations of sufficient DO levels, whereas almost linear patterns of cell growth were observed in the other two cultures of DO limitation during the identical period, resulting in apparently lower amounts of DCW. These results led us to conclude that maintenance of optimum DO levels, but not too high to cause potential shear damage on the producer, was crucial not only for the cell growth, but also for the enhanced production of AVM $B_{1a}$ by the filamentous mycelial cells of Streptomyces avermitilis.

• Korean Journal of Environment and Ecology
• /
• v.24 no.6
• /
• pp.735-743
• /
• 2010

In order to inspect growth responses of Fraxinus rhynchophylla Hance, Koelreuteria paniculata Laxmann, Quercus acutissima Carruther and Ulmus parvifolia Jacquin to NaCl treatment, NaCl solution was treated for four months with 0, 25, 50, 100 and 200 mM concentrations, then survival rate, change of relative growth rate, weight, dry weight and pigment content of leaf were investigated. According to NaCl treatment, pH and EC (electrical conductivity) of soil increased, and growth rates of four tree species fell apparently as treatment time became longer. U. parvifolia had the highest survival rate with 15% in the 200mM treatment, and the other three species withered in the treatment. Relative growth rate, weight and dry weight decreased when NaCl treatment time grew longer. The total chlorophyll declined after it rose to 60 days, and the total chlorophyll and carotenoid of the all species according to NaCl treatment did not change very much. With the result from anlayzing growth responses of four tree species to oxidative stress which occurs during NaCl treatment, U. parvifolia has the highest tolerance, followed by K. paniculata, F. rhynchophylla and Q. acutissima.

• Journal of Korean Academy of Nursing
• /
• v.3 no.3
• /
• pp.97-110
• /
• 1973

The goal of modern nursing is to provide comprehensive nursing care to patients. If comprehensive nursing care to children (within the hospital setting) is to be provided, consideration of the stage of growth and development of the child is especially important. From clinical observation, it appeared that nurses often disregarded individual requirements of children in giving nursing care. Therefore, the purpose of this study is to show that comprehensive nursing care which is based on an understanding of the growth and development of the child contributes to both the child and the mother's adaptability to the child's hospitalization. Method: Sixty children, three to three year of age, hospitalized at the Yonsei University Pediatric Ward ware studied. From April 1, 1973 to May 5, 1973, children admitted to the hospital were assigned to either an experimental or a compare groups. There were 30 children in each group. The sex and age of the children in each group was similar. In both groups were more male than female children. In the experimental group, each mother stayed with hot child continuously during his hospitalization. In the compare groups, the mother or some other member of the family stayed with the child. Each day on the child's admission the investigator visited the ward from 1-2 P.M. to 9-10 P.M., in order to provide comprehensive care for the experimental -group. The assistance given the nurses by the investigator was in the form of conferences regarding care and in giving direct care to the child and his mother. The compare group of children received nursing care as usually provided by the hospital. The instruments used to obtain the data for analysis were as follows: 1. The fear and anxiety reaction of the child was recorded by observation of the investigator for four areas: 1) separation from parent and relatives 2) reaction to Doctor and Nurse with white gowns 3) reaction to nursing care 4) reaction to injection and tests, etc. 2. Regression in area of eating, sleeping, and elimination were recorded by the investigator by questioning the mother and by observation. 3. Adaptability to the hospitalization was recorded by direct questioning of the children for areas of emotional and social adjustment. For children older than 3 years of age or children not seriously ill, using the simple I. Q. test this was possible for only 35 of the total 60 children. Result: 1. 55 percents of the total 60 children had been prepared by their parents for hospitalization. The children who had received prior preparation accepted hospitalization more readily than those who had received no preparation. (χ²=4.6 Ρ<0.05) 2. On admission 31.7 percent of the children expressed verbal fear of their discase or treatment. 25 percent felt that the disease was due to their mistake. 3. There was a significant difference in the reaction of the child to separation from the parent or relatives between the two groups. The experimental groups showed less anxiety due to separation than the compare group. (χ²=4.34 Ρ<0.05) In both groups there was less anxiety due to separation among school age (6-12 years) children than among preschool age (3-5 years) children. (χ²=9.22 Ρ<0.05) 4. More than half of the children in both groups reacted with fear and avoidance to doctor and/or nurses wearing white gowns. (χ²=0.06 Ρ<0.05) 5. The experimental group reacted more favorably to nursing in general than the compare group. (χ²=4.8 Ρ<0.05) 6. There was no difference in the fear and refused reaction to special tests and/or such as X-rays and injections, etc. between the groups. (χ²=3.77 Ρ<0.05) 7. More children in the compare group showed regressive tendencies in eating, sleeping, and elimination habits than in experimental groups. (χ²=2.3 Ρ<0.05 χ²=3.88 Ρ<0.05 χ²=4.9 Ρ<0.05) 8. There was a significant difference in the adaptability to hospitalization between the two groups. The experimental groups adapted more readily. (χ²=2.02 Ρ<0.05) 9. For children who had higher I.Q. s the adaptability to hospitalization was better regardless of the group. (χ²=5.03 Ρ<0.05) However, because of the small number of cases (60), this finding cannot be extrapolated without further verification. The date demonstrates that there was a greater adaptability to hospitalization by the child when comprehensive nursing care was given. By planning care and applying knowledge of growth and development to meet, nurses are in a position to prevent some of the psychological trauma associated with hospitalization.

• The Korean Journal of Pharmacology
• /
• v.27 no.2
• /
• pp.155-166
• /
• 1991

In order to evaluate a potential role of mitochondria in the mediation of toxicity of paraquat (PQ), submitochondrial particle and microsome of mouse liver were compared by oxygen radical generation and lipid peroxidation. With NADH in submitochondrial particle and NADPH in microsome as electron donors, PQ stimulated production of superoxide anion and $H_2O_2$ in both fractions. Under the same conditions, PQ enhanced the generation of ethylene from methional suggestiong stimulation of OH production by PQ. But these effects by PQ were somewhat lower in submitochondrial particle than in microsome. In addition, lipid peroxidation(measured as MDA production) was stimulated by PQ in both fractions. The stimulation of lipid peroxidation in both fractions seemed to occur by the same mechanism probably through perferryl ion. This was supported by the following findings: i) The lipid peroxidation in both fractions was partially inhibited by SOD and completely inhibited by DETAPAC(an iron chelator) but not by catalase or OH scavenger. ii) Addition of $ADP-Fe^{3+}$ further increased PQ-induced lipid peroxidation but decreased ethylene production from methional suggesting no correlation between OH production and lipid peroxidation. The redox-cycling of PQ in mitochondria appeared to be linked to NADH dehydrogenase, not to CoQ since all of the observed stimulations by PQ in submitochondrial particle were inhibited by p-hydroxymercuribenzoate(a NADH dehydrogenase inhibitor) but not affected by other respiratory chain blockers. The above results demonstrate that redox-cycling properties of PQ leading to oxygen radical generation and lipid peroxidation can also occur in mitochondria in the same manner as in microsome. Therefore, the observed actions of PQ in mitochondria suggest that mitochondria may also contribute to toxicity of this drug in vivo.

• Journal of vocational education research
• /
• v.37 no.2
• /
• pp.39-75
• /
• 2018

The purpose of this study is to verify the general characteristics in the previous studies and the magnitude of the correlation between the learner's satisfaction and the academic achievement in the education and training program. To do this, we searched relevant literature from 2000 to 2016, and conducted a systematic review of the literature on the final 31 studies through the selection criteria and quality evaluation. Among them, 27 meta-analysis of the literature was conducted. The finding of the study were as follows. First, a total of 31 studies were conducted from 2000 to 2016, and more than half of them(16) were conducted for the last 4 years(2009~2012). In terms of education and training students, there are 18 college students, 9 workers, and 4 elementary students in order of study. In terms of methods, 15 collective education, 14 distance education, 2 blended education. In terms of learner's participation, 22 the general participation, 9 the active participation. Second, as a result of the meta-analysis, the magnitude of the correlation between satisfaction and achievement was moderate(ZCOR=.297, 95%: CI .210~.383). Third, as a result of verifying the difference in the magnitude of the correlation effect between satisfaction and achievement according to the characteristics of the education and training program, there was no difference between the groups in the student object and education method, but there was a difference in the magnitude of the correlation effect depending on the participant type(Q=15.40, df=1, p<.0001). The active participation showed a correlation effect size larger(ZCOR=.588, 95%: CI .422~.754). The effect size of the general participation was lower than the median(ZCOR=.211, 95%: CI .12 ~.300).