• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.332-340
• /
• 2014

The purpose of this study was to establish the optimal growth temperature and to select genetic resources for production of cowpea sprouts. Seowon was treated between $15^{\circ}C$ and $30^{\circ}C$ at intervals of $3^{\circ}C$ to investigate growth temperature. Twelve resources, including Seowon, IT154149, IT154153, Tvu7426, and Tvu7778, were used for cultivating sprouts at a temperature of $27^{\circ}C$. The yield ratio of cowpea sprouts was highest at $27^{\circ}C$ (657%), and was reduced when growth temperature was decreased. The hard seed rate was lower when the growth temperature was increased. Vitamin C content was highest at $24^{\circ}C$ (2.85 mg/g), ranged between 2.15 and 2.29 mg/g at other growth temperatures, and increased with the length of the growth period. The inorganic component content of cowpea sprouts did not vary based on growth temperature, while the amino acid content increased with increasing growth temperature between $15^{\circ}C$ and $24^{\circ}C$, and then subsequently decreased as growth temperature rose from $24^{\circ}C$ to $30^{\circ}C$. IT154153 had the highest yield ratio of cowpea sprouts per genetic resource (647%), followed by Seowon (615%), and Tvu7426 (608%). Genetic resources with a higher yield ratio had smaller seeds, a thinner seed coat, and superior germinability. The inorganic components found at highest concentrations in the cowpea sprouts were potassium, magnesium, calcium, sodium, iron, molybdenum, and zinc (in that order). In comparison to raw seeds, the protein, calcium, zinc, molybdenum, and iron content in the cowpea sprouts was higher, while the content of aluminum and boron was lower.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.305-317
• /
• 2005

This study addresses the preliminary results of rock slope stability analyses including hazard assessments for slope failure conducted on the selected sections of rural road cut slope which are about 4 km long. The study area is located in the Mt. Chuntae northeast of Busan and mainly composed of Cretaceous rhyolitic ash-flow tuff', fallout tuff, rhyolitc and andesite. The volcanic rock mass in the area has a number of discontinuities that produce a potentially unstable slope, as the present cut slope is more than 70 degrees in most of the slope sections. Discontinuity geometry data were collected at selected 8 scanline sections and analyzed to estimate important discontinuity geometry parameters to perform rock slope kinematic and block theory analyses. Kinematic analysis for plane sliding has resulted in maximum safe slope angles greater than $65^{\circ}$ for most of the discontinuities. For most of the wedges, maximum safe cut slope angles greater than $45^{\circ}$ were obtained. Maximum safe slope angles greater than 80" were obtained fur most of the discontinuities in the toppling case. The block theory analysis resulted in the identification of potential key blocks (type II) in the SL4, SL5, SL6 and SL8 sections. The chance of sliding taking place through a type ll block under a combined gravitational and external loading is quite high in the investigated area. The results support in-field observations of a potentially unstable slope that could become hazardous under external forces. The results obtained through limit equilibrium slope stability analyses show how a stable slope can become an unstable slope as the water pressure acting on joints increases and how a stable slope under Barton's shear strength criterion can fail as the worst case scenario of using Mohr-Coulomb criterion.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.47-56
• /
• 2008

pH and Eh were measured at 25 points in the abandoned Dalcheon mine. And, major ion components $(Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-},\;CO_3^{2-},\;HCO_3^-)$ were analyzed through groundwater sampling at 41 points. pH and Eh were measured the highest concentration in serpentinite area. And, pH was between weak alkaline and intermediate values in study area. Groundwater in study area was dominated oxidation-reduction environment caused by reaction with carbonate rock. Because sulfur components contained in carbonate, serpentinite, arsenopyrite and pyrite was dissolved by groundwater, $SO_4^{2-}$ component was high in study area. And $Ca^{2+},\;Mg^{2+}$ of cations were high. Correlation coefficients of ion components in tailing dumps were 0.95 between $Ca^{2+}\;and\;SO_4^{2-}$, 0.86 between $Ca^{2+}\;and\;Mg^{2+}$, 0.85 between $Mg^{2+}\;and\;SO_4^{2-}$. Correlation coefficients of ion components in bedrock were 0.86 between $Mg^{2+}\;and\;SO_4^{2-}$, 0.68 between $Ca^{2+}\;and\;SO_4^{2-}$. Concentration range of $Ca^{2+}$ in tailing dumps was $6.85{\sim}323.58mg/L,\;and\;3.18{\sim}207.20mg/L$ in bedrock. Concentration range of $SO_4^{2-}$ in tailing dumps was $21.54{\sim}1673.17mg/L,\;and\;2.04{\sim}1024.64mg/L$ in bedrock. By the result of Piper diagram analysis with aquifer material, groundwater in tailing dumps was $Ca-SO_4$ type. Groundwater quality types with bedrock material were Mg-$SO_4$ and Mg-$HCO_3$ types in serpentinite area, Ca-$HCO_3$ type in carbonate area, Na-K and $CO_3+HCO_3$ types in hornfels, respectively. As a result of this study, groundwater in tailing dumps were dissolved $Ca^{2+},\;Mg^{2+}\;and\;SO_4^{2-}$ components with high concentration. Also, these ion components were transported into bedrock aquifer.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.105-120
• /
• 2016

Most of riverside in Korea, in case of application of water curtain cultivation (WCC) technique, has been inveterately suffering from the gradual drawdown of groundwater level and related shortage of water resources during the WCC peak time. We believe that the water resources issue in these riverside areas can be effectively solved when the interaction between groundwater and nearby surface water is well understood. To investigate the connection between stream and ground water, and the influence of stream water on the nearby aquifer, this study examined the water temperature and oxygen and hydrogen stable isotopic compositions. The study area is well-known strawberry field applying the WCC technique in Sangdae-ri, Gadeok-myon, Cheongju City, and the sampling was done from February 2012 through June 2014 for stream and ground water. Some groundwater wells near stream showed big temporal variations in water temperature, and their oxygen and hydrogen stable isotopes showed similar compositions to those of adjacent stream water. This indicates that the influence of stream water is highly reflected in the stable isotopic composition of groundwater. Four cross-sectional lines from stream to hillside were established in the study area to determine the spatial differences in water quality of wells. At the late stage of WCC in February to March, groundwater of wells in line with short cross-sectional length showed the narrow range of isotopic compositions; however, those in the long cross-sectional line showed a wide compositional range. It was shown that the influence of the stream water at the late WCC stage have reached to the distance of 160 to 165 m from stream line, which is equivalent to the whole length and one-third point in each short and long cross-sectional line, respectively. Therefore, the wide compositional range in the long cross-sectional lines was not only due to the influence of stream water, but apparently resulted from the change of relative impact of each groundwater supplying from two or more aquifers. In view of stable isotopic compositions, there seems to be three different aquifers in this study area, which is competing for dominance of water quality in wells at each period of WCC.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.63-79
• /
• 2008

Physicochemical characteristics of stream water, leachate, mine water and groundwater were investigated to estimate the influences of the tailing and waste rock from the abandoned Uljin mine area. Total extraction analysis and mineralogical studies were carried out to understand sulfide weathering and to determine the distributions of trace elements in the soil affected by mine waste (tailing, waste rock and leachate). The pH and EC value of the leachate from the tailing disposal ranged 2.9-6.0, $99{\sim}3,990{\mu}S/cm$, respectively, and the concentrations of dissolved major (up to 492 mg/l Ca; 83.8 mg/l Mg; 45.2 mg/l Na; 44.7 mg/l K, 50.8 mg/l Si) and trace elements (up to $826,060{\mu}g/l$ Fe; $131,230{\mu}g/l$ Mn; $333,600{\mu}g/l$ Al; $61,340{\mu}g/l$ Zn; $2,530{\mu}g/l$ Cu; $573{\mu}g/l$ Cd; $476{\mu}g/l$ Pb) were relatively high. The stream water showed the variation of dissolved metal concentrations in seasonally and spatially. The dissolved metal contents of the stream water increased by influx the leachate from the tailing disposal, but these of the down stream have been considerably decreased by mixing of dilute tributaries. The dissolved metal concentrations of the stream water at dry season (as February) were lower than these at rainy season (as May and July). These represent that the amounts of the leachate varied with season. However, stream water could not be effectively diluted by confluence with uncontaminated tributaries, because the flux of tributaries and streams reduced at dry season. Thus attenuations by dilution had been dominantly happened in rainy seasons. The order of accumulations of trace element in soils compared with background values revealed Mn>Fe>Pb>Cu>Zn. Sulfide minerals were mainly pyrrhotite, sphalerite and galena and chalcopyrite. Pyrrhotite was rapidly weathered along the edge and fractures, and results in the formation of Fe-(oxy)hydroxides, which absorbed a little amount of Zn.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.93-113
• /
• 2008

This study presents petrochemistry and $^{40}Ar/^{39}Ar$ absolute ages of subsurface volcanic rock cores from twenty(20) boreholes in the eastern lowland (altitude loom below) of Jeju Island, Handeong-Jongdal-Udo-Susan-Samdal-Hacheon areas, and discusses topography and volcanism in the area. The subsurface volcanic rock cores are mainly basalts in composition with minor tholeiitic andesites and basaltic trachyandesites. Sequences of intercalated tholeiitic, transitional and alkalic lavas suggest that tholeiitic and transitional to alkalic lavas must have erupted contemporaneously. Especially, occurrences of trachybasalts and basaltic trachyandesites at the bases in the area imply that the volcanism in the area was initiated with slightly differentiated alkaline magma activity. The $^{40}Ar/^{39}Ar$ absolute ages of the subsurface volcanic rock cores range from $526{\pm}23ka\;to\;38{\pm}4Ka$. The lava-forming Hawaiian volcanic activities of the eastern lowland can be divided into five sequences on the basis of sediment distribution, whole rock geochemistry and $^{40}Ar/^{39}Ar$ absolute ages of the subsurface volcanic rock cores; stage I-U$(550{\sim}400Ka)$, stage II$(400{\sim}300Ka)$ and stage III$(300{\sim}200Ka)$ during syn-depositional stage of Seoguipo Formation, and stage IV$(200{\sim}100Ka)$ and stage V(younger than 100Ka) during post-depositional stage. In the eastern lowland of Jeju Island, compositional variations and local occurrences of the subsurface volcanic rocks as well as existences of various intercalated sediment layers (including hydrovolcanogenic clasts) suggest that the volcanism must have continued for long time intermittently and that the land has been progressively glowed from inland to coast by volcanic activities and sedimentation. It reveals that the subsurface volcanic rocks in the eastern lowland of Jeju Island must have erupted during relatively younger than 200Ka of stages IV and V. The results of this study are partly in contrast with those of previous studies. This study stresses the need that previous reported volcanic activities in Jeju Island based on K-Ar ages of volcanic rocks should be carefully reviewed, and that stratigraphic correlation from boreholes should be conducted by quantitative criteria combined with petrography and petrochemstry as well as radiometric studies of volcanic rock cores.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.685-693
• /
• 2011

Objectives : Five years have passed since the departments of dental hygiene with four-year term released their graduates. It is necessary to investigate concordance between desired career and current job and job satisfaction in dental hygienists according to graduation term. Accordingly, a survey on concordance between desired career and current job and job satisfaction in dental hygienists according to graduation term was conducted to obtain a basis necessary for providing right job consciousness to students of departments of dental hygiene. Methods : Of departments of dental hygiene nationwide, a total of four departments consisting of two departments with 3-year term and two departments with 4-year term were randomly selected. Of 683 graduates for 2006-10 of the selected departments, 163 graduates who agreed to participate in this study through telephone and e-mail were chosen as subjects. The data of 159 graduates were analyzed except for 4 graduates who did not respond to job satisfaction. The questionnaire consisted of a total of 17 questions: 5 general questions such as graduation term, and current job and salary, 2 questions for desired career at the time of entrance and graduation, and 10 questions for the satisfaction of current job and working environments. Concordance between the desired career at the time of entrance and graduation and current job was calculated using Kappa-value. A cross analysis was conducted to investigate job satisfaction according to general features and graduation term. A statistical significance was examined using $X^2$-test (p<0.05). Results : The Kappa-value for concordance between the desired career at the time of graduation and the current job was 0.288, showing slightly low concordance. In particular, the Kappa-value was 0.089 in the graduates of departments of dental hygiene with 3-year term, which showed significantly low concordance. The job satisfaction of the graduates was 49.1%, which was higher in the graduates with 4-year term than in the graduates with 3-year term, but was statistically insignificant (p>0.05). The detailed job satisfaction was all higher in the graduates with 4-year term than in the graduates with 3-year term except for distance to a working place, but a statistical significance was only found in working place recognition and regional status (p<0.05 ). Conclusions : This study showed differences in concordance between desired career and current job and job satisfaction between the graduates of departments of dental hygiene with 3-year term and the graduates of departments of dental hygiene with 4-year term. Therefore, the curriculum of department of dental hygiene is required to be more specifically applied in accordance with graduation term. In addition, a further study is required to develop specialized curriculums in accordance with graduation term.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.178-191
• /
• 2020

Purpose: This paper proposes a performance evaluation method for state-of-the-art facility inspection/diagnostic equipment through a trend survey of equipment and standardization systems of US, Japan, and Korea. This paper also suggests the priority of developing a performance evaluation method through expert interviews and surveys. Method: In this study, report for the last 5 years of FMS, state-of-the-art equipment of facility maintenance companies/safety diagnosis specialist agencies and papers/research reports/patents of NTIS were analyzed to identify recent trends of facility inspection/diagnostic equipment usages. standardization system of US, Japan, and Korea were analyzed to figure out a suitable form of a performance evaluation method for the domestic situation. And expert interview and survey were conducted to identify the priority of developing a performance evaluation method. Result: The performance evaluation method must be developed by the shape that only evaluates performance, regardless of types of equipment, on inspection item level for creative technology development. The priority of developing the performance evaluation method was identified as crack detection of concrete for durability evaluation and displacement/deformation/fatigue detection of concrete and steel for stability evaluation. Conclusion: The performance evaluation method will be developed firstly for the crack detection of concrete for durability evaluation and displacement/deformation/fatigue detection of concrete/steel for stability evaluation. In order to promote creative technology development, the performance evaluation method should be developed in a form that provides standardized specimens or testbeds and can be applied regardless of types of technologies.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.41-50
• /
• 2006

It is generally regarded a design system in post-industrial society, which products designed by in-house designers or design consultancy are manufactured in factory and distributed in market for the consumer. Although it is treated an old design system in traditional society, the traces of vernacular design has been remaining in the state of adopted to the periodical needs in these days, also proving the attribute of design culture to constitute human's material environment as well as existing design systems. There were discovered various design artifacts in daily surroundings vary from the established design in several manners, user modifications or manufactures in everyday lives formalized them. It was approached a case study that analyze the changes of artifact configuration and designer/user context and creation process of the non-professional design artifacts, Creativity Template Theory and ACM(Artifact Context Model) have been utilized for the analysis model. From the analysis result, It assume that the everyday artifacts may be ordinary but extra-ordinary including particular ideas and identity represented by everyday designers or users. Beside these characteristics induce the potentiality that reflect on creative motives for the designers or a complementary artifact generator filling up with drawbacks in established design system. The everyday design domain, various explorations and alternatives are made, is seems to be another design practice domain dissimilar to the one in the industry-based design. Moreover it provides an more easily accessability for the approaching user-friendly design, user customization because they conduct the reliable modeling of consumer and end-user. Finally, based on the exploratory study regarding interpretation of context and configuration in the everyday artifacts, new approach for the design process and design education through more detailed cognitive modeling of everyday designers will be a further study.