• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.366-371
• /
• 2012

In this paper, fabricated by MEMS uncooled micro-bolometer detector for the study in the infrared sensitivity enhancement. Absorption layer SiOx-Metal series MDTF (metal-dielectric thin film) by high absorption rate and has a high thermal coefficient of resistance, low noise characteristics were implemented. Then MDTF were made in a vacuum deposition method. And MDTF for the analysis of the physical properties of silicon wafers were fabricated, TCR (temperature coefficient of resistance) value was made in order to measure the glass wafer and FT-IR (Fourier Transform Infrared spectroscopy) values were made in order to measure the germanium window. The analyzed results of MDTF -3 [%/K] has more characteristics of the TCR. And 8~12 um wavelength region close to 70% in the absorption characteristic.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2491-2496
• /
• 2012

2000년대 들어서 가요계는 이전에는 볼 수 없었던 특이한 현상이 발생하였다. 많은 남자 가수들이 똑같은 목소리, 똑같은 창법으로 노래를 부르는 현상이 그것이다. 혹자들은 그것을 "소몰이 창법"이라 이름 붙였는데 당시에는 특이한 목소리로 인해 대중들에게 상당한 인기를 끌었다. 80년도 초 조용필의 "창밖의 여자"가 히트를 하면서 많은 가수들이 조용필의 창법을 익히고자 했던 적은 있었지만 많은 남자 가수들이 똑같은 목소리와 창법으로 앨범까지 발표한 적은 유래가 없었다. 본 연구에서는 "소몰이 창법"이 무엇인지 어떻게 시작 되었는지 또한 발성의 특징은 무엇인지 등에 관한 연구 논문이다.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.1-5
• /
• 2012

This paper describes a 150-Mb/s monolithic optical receiver for plastic optical fiber link using a standard CMOS technology. The receiver integrates a photodiode using an N-well/P-substrate junction, a pre amplifier, a post amplifier, and an output driver. The size, PN-junction type, and the number of metal fingers of the photodiode are optimized to meet the link requirements. The N-well/P-substrate photodiode has a 200-${\mu}m$ by 200-${\mu}m$ optical window, 0.1-A/W responsivity, 7.6-pF junction capacitance and 113-MHz bandwidth. The monolithic receiver can successfully convert 150-Mb/s optical signal into digital data through up to 30-m plastic optical fiber link with -10.4 dBm of optical sensitivity. The receiver occupies 0.56-$mm^2$ area including electrostatic discharge protection diodes and bonding pads. To reduce unnecessary power consumption when the light is not over threshold or not modulating, a simple light detector and a signal detector are introduced. In active mode, the receiver core consumes 5.8-mA DC currents at 150-Mb/s data rate from a single 3.3 V supply, while consumes only $120{\mu}W$ in the sleep mode.

• 전기화학회지
• /
• 제15권3호
• /
• pp.135-148
• /
• 2012

Ionic liquids are steadily attracting interests throughout a recent decade and their application is expanding into various fields including electrochemistry due to their unique properties such as non-volatility, inflammability, low toxicity, good ionic conductivity, wide electrochemical potential window and so on. These features make ionic liquids become an alternative solution for electrodeposition of metals that cannot be electroplated in aqueous electrolytes. In this review, we classify investigated metals into three categories, which are light (Li, Mg), refractory (Ti, Ta) and noble (Pd, Pt, Au) metals, rather than covering the exhaustive list of metals and try to update the recent development in this area. In electrodeposition of light metals, granular fine Li particles were successfully obtained while the passivation of electrodeposited Mg layers is an obstacle to reversible deposition-dissolution process of Mg. In the case of refractory metals, the quality of Ta and Ti deposit particles was effectively improved with addition of LiF and pyrrole, respectively. In noble metal category, EMIM TFSA ionic liquid as an electrolyte for Au electrodeposition was proven to be effective and BMP TFSA ionic liquid developed a smooth Pd deposit. Pt nanoparticle production from ionic liquid droplet in aqueous solution can be cost-effective and display an excellent electrocatalytic activity.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.16-27
• /
• 2012

In multi-interface multi-channel(MIMC) based tactical ad hoc networks, QoS support for required operational capacity is one of the main challenging issues for multi-hop transmissions. To support QoS in such a harsh environment, we propose a novel MAC scheme to minimize multi-hop as well as per-hop delay. The current IEEE 802.11 MAC protocols should contend to reserve the channel resource at every hop by each sender. The every-hop channel contention results in a degradation of end-to-end delay for multi-hop transmissions. The basic idea of our scheme is to make a "multi-hop reservation" at the MAC layer by using the modified RTS frame. It contains additional information such as destination information, packet priority, and hop count, etc. In addition, we differentiate the contention window area according to the packet priority and the number of hops to deliver packets in the predefined allowed latency. Our scheme can minimize the multi-hop delay and support the QoS of the critical data in real time(i.e., VoIP, sensing video data, Video conference between commanders). Our simulation study and numerical analysis show that the proposed scheme outperforms the IEEE 802.11 MAC.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.288-295
• /
• 2012

최근 소득수준이 올라감으로서 레저용 경량 항공기를 통한 여가활용 인구가 늘어나고 있다. 하지만 레저용 경량 항공기는 민항기나 군용 항공기에 비해 비교적 저가이기 때문에 탑재하고 있는 항공기기도 다른 항공기에 비해 잘 갖추고 있지 않는 경향이 있다. 본 논문에서는 최근 대중화되고 있는 스마트폰(iPhone, 안드로이드 폰, 윈도우 모바일 폰, 바다 폰 등) 및 스마트 패드(iPad, 갤럭시 Tab 등)를 활용하여 레저용 경량 항공기의 운항에 보조적인 기능을 제공할 수 있는 경량 항공기용 내비게이션을 설계하고 구현하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.445-452
• /
• 2012

With the increasing number of high-rise and large-scale buildings, modern buildings are becoming intelligent, and are incurring high construction costs and requiring careful maintenance. Maintenance works for high-rise buildings significantly depend on human labor, unlike other construction processes that are gradually being automated. The resulting accidents may produce very high social and economic losses. To address this problem, herein, this paper proposes robotic building maintenance system using multi-robot concept, in specific, cleaning a building facade which is directly subjected to minimize human labor; that improves the process efficiency and economic feasibility. The sensor for detecting contamination of building's outer-wall glass is proposed; Kalman filter was used for estimating robots' status with the contamination of the window glass. Task allocation of the sensor based multi-robots for an effective way of task execution is introduced and the feasibility was verified through the simulations.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.205-210
• /
• 2012

본 논문에서는 RED 파라미터를 조정하여 차등화 서비스의 서비스 품질 관리의 성능을 고찰한다. 차등화 서비스는 CIR 혹은 PIR 같은 QoS 파라미터를 이용하여 특정 트래픽의 패킷들을 구분한다. 구분된 패킷을 표시하기 위해 코드 포인트가 사용되며 각각의 가상 큐에 입력된다. 코드 포인트에 따라서 각 가상 큐에는 다른 RED 파라미터 값들이 적용된다. 코드 포인트 값이 커질수록 엄격한 RED 파라미터 값들이 할당된다. RED 파라미터를 조정하여 서비스 품질을 관리 할 수 있음을 보이기 위해 본 논문은 간단한 2 색 표식을 갖는 타임 슬라이딩 윈도우의 정책 모델을 사용하였다. NS-2를 이용한 실험 결과, RED 파라미터를 조정하여 차등화 서비스의 서비스 품질이 효과적으로 관리됨을 확인하였다.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.797-803
• /
• 2012

In this paper, for minimizing the real-time operating load losses of the power transformer, a SCADA optimum operating system was developed, and the economic analyses on the test operation were performed. Transformer loss DB which reflects the economic integration operation criteria was constructed by referring the transformer manufacturer's loss data(iron loss, copper loss). Based on the loss DB, each substation transformer real-time loss was calculated according to the size of the transformer loads, and if integration or separation transformer operating conditions minimizing the loss are met, then a window pops-up and the dispatcher performs the substation equipments operation according to the procedure provided by this system. With the existing SCADA main program, the relation database of the substation facilities and integration/separation operation algorithm were developed and applied to Auto MTR Processor and pconn Processor Task module. Seven stations test data for seven months were analyzed for the economic analyses, and the results showed that Cost-Benefit ratio was 2.64, and IRR(Internal Rate of Return), 36%, which asserted the economic justification of the proposed system.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1656-1661
• /
• 2012

UV inspection technology is being used for predictive maintenance of power facility together with IR-thermography and ultrasonic devices. In this paper, the UV corona camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. The UV corona camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The transmission between 250 to 280nm was 11% ($12.5%{\times}88%{\times}98%$) by combing the transmission on absorption film, window and other filter(UG 5, nickel sulphate and so on). In a distance of 5m with the UV corona camera it is possible to detect partial discharge with a PD level of 2.5pC and a RIV level of $3.6dB{\mu}V$.