• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.8-16
• /
• 2004

An inversion method is presented for the determination of the compressional wave speed, compressional wave attenuation, thickness of the sediment layer and density as a function of depth for a horizontally stratified ocean bottom. An experiment for estimating those properties was conducted in the shallow water of South Sea in Korea. In the experiment, a light bulb implosion and the propagating sound were measured using a VLA (vertical line array). As a method for estimating the geoacoustic properties, a coherent broadband matched field processing combined with Genetic Algorithm was employed. When a time-dependent signal is very short, the Fourier transform results are not accurate, since the frequency components are not locatable in time and the windowed Fourier transform is limited by the length of the window. However, it is possible to do this using the wavelet transform a transform that yields a time-frequency representation of a signal. In this study, this transform is used to identify and extract the acoustic components from multipath time series. The inversion is formulated as an optimization problem which maximizes the cost function defined as a normalized correlation between the measured and modeled signals in the wavelet transform coefficient vector. The experiments and procedures for deploying the light bulbs and the coherent broadband inversion method are described, and the estimated geoacoustic profile in the vicinity of the VLA site is presented.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.209-231
• /
• 1999

Even though titanium(Ti) and its alloys are the most used dental implant materials, there are some problems that Ti wears easily and interferes normal osteogenesis due to the metal ions. Ti coated with bioactive ceramics such as hydroxyapatite has also such problems as the exfoliation or resorption of the coated layer, Recent studies on implant materials have been proceeding to improve physical properties of the implant substrate and biocompatibility of the implant surfaces. The purpose of the present study was to examine the physical property and bone tissue compatibility of bioinert nitrides ion plated Ti, Button type specimens(14mm in diameter, 2.32rrun in height) for the abrasion test and cytotoxicity test and thread type implants(3.75mm in diameter, 6mm in length) for the animal experiments were made from Ti(grade 2) and 316LVM stainless steel. Ti specimens were ion plated with TiN, ZrN by the low temperature arc vapor deposition, and the depth profile of the TiN/Ti, ZrN/Ti ion plated surface was examined by Auger Electron Spectroscopy. Three kind of button type specimens .of TiN/Ti, ZrN/Ti and Ti were used for abrasion test, and HEPAlClC7 cells and CCD cells were cultivated for 4 days with the specimens for cytotoxicity test. Thread type implants of TiN/Ti, ZrN/Ti, Ti, 316LVM were implanted on the femur of 6 adult dogs weighing 10kg-13kg. Two dogs were sacrified for histological examination after 45 days and 90 days, and four dogs were sacrified for the removal torque test of the implant') after 90 days. The removal torque force was measured by Autograph (Shimadzu Co., AGS-1000D series, Japan). Abrasion resistance of TiN/Ti was the highest, and that of ZrN/Ti and Ti were followed. The bioinert nitride ion plated Ti had much better abrasion resistance, compared with Ti, In the cytotoxicity test, the number of both cells were increased in all specimens, and there were no significant difference in cytotoxic reaction among all groups (p>0.1), In histological examination, 316LVM showed the soft tissue engagement in interface between the implant and bone, but the other materials after 45 days noted immature new bone formation in the medullary portion along the implant surface, and those after 90 days showed implant support by new bone formation in both the cortical and the medullary portion, The removal torque force of Tilv/Ti showed significantly higher than that of Ti(p(O,05). The difference in removal torque force between TiN/Ti and ZrN/Ti was not significant(p>0.05), and that of 316LVM was lowest among all groups(p<0.05). These results suggest that bioinert nitrides ion plated Ti can resolve the existing problems of Ti and bioactive ceramics, and it may be clinically applicable to human.

• The Journal of Engineering Geology
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2002

Borehole image analysis has been carried out to obtain the detailed geological data by approach of direct observation. Direct application of borehole image analysis inevitably gives rise to a few of restriction of data acquisition due to the limited information within narrow borehole space. Considering the apparent dip of discontinuity surface depending upon the direction, the visualized program of two-dimensional subsurface discontinuities is coded. Borehole image analysis can compensate the distribution of subsurface discontinuity extending into the expected area of investigation. In order to draw subsurface profile in the proposed area of subsurface construction, visualized program is coded as a window GUI (Graphic User Interface) using Fortran and Visual Basic Programming languages. It is to open publicly for the usage of whoever is in want. Discontinuity distribution map is visualized along the Proposed line of tunnel in the Janggye-ri area, Jangsu-gun. Using the visualized program, the limited information from borehole spatially applies into analysis of overall subsurface structures, and the distributional characteristics of discontinuity anticipate at the proposed area. In addition, spacing and extension of joint and depth of discontinuity effecting tunnel safety can be visualized along the direction of the proposed tunnel. These lines of visualization apply design and construction of fundanmental structures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.58-61
• /
• 1995

Instead of using CCl$_4$CCl$_2$F$_2$ gases, we used a alternative reaction gas of CFCs which we have developed, for the experiment of laser induced dry etching of laser induced dry etching of GaAs, and compared with the etch profile of a usual reation gas. Laser powers(power density) on the sample surface were varied from 100 mW(12.7 MW/$\textrm{cm}^2$) to 210mW(27 MW/$\textrm{cm}^2$) The laser beam was scanned over the sample by moving the cell with a speed raging from 8.3$\mu\textrm{m}$/sec and the gas pressure also was varied form 260 Torr to 760 Torr, High etching rates up to 136 $\mu\textrm{m}$/sec and an aspect ratio of 2.6 have been achieved by single scan of laser beam. The chemical compositions of the reaction products deposited on the etched groove were measured by Auger electron spectroscopy(AES) Etch profiles, including depth and width were observed by scanning electron microscopy(SEM)

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.450-455
• /
• 2004

NiCr thin films were fabricated by thermal evaporation method using NiCr alloy as evaporating source. NiCr thin films were annealed at various temperatures in air atmosphere in order to investigate effects of annealing conditions on phase change, composition, and microstructures of NiCr films. Typical multilayer was formed after annealing in air atmosphere. This results from the diffusion and oxidation of Cr toward surface during annealing. In the case of annealing at 700$^{\circ}C$, large columnar grains of NiO were formed on Cr-oxide layer through the diffusion and oxidation of Ni over Cr-oxide layer. Especially, NiO layer was formed additionally on surface, sustaining the underlayer structure with the formation of porous Ni layer.

• Genomics & Informatics
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2012

Recently, the technologies of DNA sequence variation and gene expression profiling have been used widely as approaches in the expertise of genome biology and genetics. The application to genome study has been particularly developed with the introduction of the nextgeneration DNA sequencer (NGS) Roche/454 and Illumina/ Solexa systems, along with bioinformation analysis technologies of whole-genome $de$ $novo$ assembly, expression profiling, DNA variation discovery, and genotyping. Both massive whole-genome shotgun paired-end sequencing and mate paired-end sequencing data are important steps for constructing $de$ $novo$ assembly of novel genome sequencing data. It is necessary to have DNA sequence information from a multiplatform NGS with at least $2{\times}$ and $30{\times}$ depth sequence of genome coverage using Roche/454 and Illumina/Solexa, respectively, for effective an way of de novo assembly. Massive shortlength reading data from the Illumina/Solexa system is enough to discover DNA variation, resulting in reducing the cost of DNA sequencing. Whole-genome expression profile data are useful to approach genome system biology with quantification of expressed RNAs from a wholegenome transcriptome, depending on the tissue samples. The hybrid mRNA sequences from Rohce/454 and Illumina/Solexa are more powerful to find novel genes through $de$ $novo$ assembly in any whole-genome sequenced species. The $20{\times}$ and $50{\times}$ coverage of the estimated transcriptome sequences using Roche/454 and Illumina/Solexa, respectively, is effective to create novel expressed reference sequences. However, only an average $30{\times}$ coverage of a transcriptome with short read sequences of Illumina/Solexa is enough to check expression quantification, compared to the reference expressed sequence tag sequence.

• The Korean Journal of Ecology
• /
• v.27 no.5
• /
• pp.291-300
• /
• 2004

This study was carried out to investigate the relationship of occurrence and distribution of Eupatorium rugosum by forest types and soil characteristics in Mt. Namsan in Seoul, Korea. E. rugosum is designated as a harmful non-indigenous plant in ecosystem by the Natural Environment Conservation Act in Korea. E. rugosum grew along roadside and in valleys with some favorable light conditions. E. rugosum occurred in aggregations under Pinus densiflora and Robinia pseudoacacia communities. And it was sparse in forests of Quercus mongolica and P. koraiensis. The representative herb layer species were Oplismenus undulatifolius, and Parthenocissus tricuspidata in the E. rugosum communities. There was a significantly negative correlation between the coverage of E. rugosum and the coverage of tree layer. However, the result of ANOVA of E. rugosum coverage by dominant species of tree layers did not show a significant difference (p>0.05). The level of soil moisture content, organic content, and pH, was slightly higher in communities with E. rugosum than without, but it was statistically non-significant difference. However, it was found that the coverage of E. rugosum was very significantly negative correlated with the depth of top soil profile (litter and fermentation layer, p<0.05).

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.303-309
• /
• 1992

This study eras carried out to investigate the ecological changes on the plant community at erosion controlled area in Yoju-gun, Kyonggi-do. The results of the study were as follows : 1. The depth of organic matters in the soil profile from 4 to 14 years was estimated to be $Y_{(cm)}=0.436X_{(yr)}-0.931$(r=0.978), and 02 layer was $Y_{(cm)}=0.339_{(yr)}-0.931$ (r=0.954). 2. On upper plant layer. Alnus spp. was decreased, on an average, 32% of relative coverage, 12.4% of relative density and 16.8% of relative frequency in each plot for 3 years, as this area was damaged by Agelastica coerulea Baly for 2-3 years. 3. On upper plant layer, relative coverage of Pinus spp. was increased after 6, 7 years in erosion controlled area and was taked the highest plant (more then 40%) from 10 to 14 years. 4. On lower plant layer, relative density of Quercus ssp. (these species has not been planted and sown on erosin controlling) was increased all the plot. 5. The increase of the whole crown projection area was estimated to be $Y_{(m^2)}=18.020X_{(yr)}+18.834$(r=0.954) 6. The biomass was estimated to be 14.88t/ha on elapsed 6 years, 22.84t/ha on 8 years, 35.08t/ha on 10 years, 47.80t/ha on 12 years, 58.13t/ha on 14 years.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.897-903
• /
• 2015

In this paper, the contrast therapy of skin was numerically investigated by solving the conjugate heat transfer problem. A finite volume method based on the SIMPLE algorithm was adopted to solve the axisymmetric incompressible Navier-Stokes equations, coupled with an energy equation. These equations are strongly coupled with the Pennes bio-heat equation in order to consider the effect of blood perfusion rate. We investigated the thermal response of skin at some selected depths for various input temperature profiles of a stimulator for contrast therapy. From the numerical simulations, the regions with cold/hot threshold temperatures were found for five input temperature profiles. It was shown that the temperature varies mildly for different input profiles as the depth increases, owing to the Pennes effect. The input temperatures for effective hot/cold stimulation of dermis layer were found to be $47^{\circ}C$ and $7^{\circ}C$, respectively. The present numerical results will be used for finding an optimal temperature profile of a stimulator for contrast therapy.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.169-174
• /
• 1998

To define the structure and diversity of bacterial communities in the aqutic ecosystem, Lake Soyang, the largest artificial reservoir in Korea, a new method, fluorescent in situ hybridization was applied. This technique relies on the specific hybridization of the nucleic acid probes to the naturally amplified intracellular rRNA. By this method, the bacterial community composition of Lake Soyang and bacterial numbers belong to eubacteria, proteobacteria and Cytophaga-Flavobacterium group were estimated. Total bacterial numbers ranged from $0.3{\times}10^6{\sim}2.0{\times}10^6cells{\cdot}ml^{-1}$, and vertical profile of total bacteria showed the peak at 2 and 5 m depths. The ratio of eubacteria to total bacteria were 22~100% and varied with depth and season. The percentage of Proteobacteria ${\alpha}$-group ranged 2.6~66.7%, ${\beta}$-group 4.5~53.5%, ${\gamma}$-group 4.6~76.7% and Cytophaga-Flavobacterium group 2.1~35.9%. Also, bacteria] community had spatial and temporal characteristics. The dominant groups were ${\beta}$-group in winter, ${\gamma}$-group in spring and early summer and ${\alpha}$-group in summer.