Introduction: The crucial step in preclinical process of radiopharmaceutical production is internal dosimetry evaluation by different ways to realize radiobiological dose-response relationships and to extract the results for clinical use. Till now several bone-seeking radiopharmaceuticals have been developed for bone metastasis. Interesting features of bisphosphonates attracted attentions to them in the field of radiopharmaceutical therapy and studies on new generation of them have been doing too. Materials and methods: In this study, we used ZNA as representative of the third generation. The radiopharmaceutical 188Re-ZNA was produced and its radiochemical purity was investigated. Then, the biological distribution of the produced radiopharmaceutical at 1, 2, 4 and 24 h after injection on different organs of mice were investigated. Finally, the absorbed dose of organs in the human body was assessed using the RADAR method. Results: The results show 96% radiochemical purity of the 188Re-ZNA radiopharmaceutical. The amount of %ID/g in bone is 1.131% after 1 h and in 24 h it has a significant amount compared to other organs, that is 0.516%. Also dosimetric results show that the highest absorption dose is related to bone and the amount of this dose is 0.050 mGy/MBq. Conclusion: Considering the possibility of producing the 188Re-ZNA radiopharmaceutical, as well as the proper distribution of this radiopharmaceutical in target and non-target organs and increasing the absorbed dose in bone, it can be concluded that this radiopharmaceutical can be useful in the "radiopharmaceutical therapy" in metastases.
Objectives : This study was performed to investigate effect of evodiae fructus on acute reflux esophigitis rat induced by pylorus and forestomach ligation operation. Methods : Twenty-four laboratory rats were divided four groups and each group had six rats ; normal intact group, acute reflux esophagitis (RE) control group, two experiment RE group treated extract of evodiae fructus 600 mg/kg (EEF600) and 300 mg/kg (EEF300). All rats was fasted for 18 hr but free water, we induced RE by pylorus and forestomach ligation operation. Intact group and RE control group rats were orally administered a distilled water and two experiment groups were orally administed with EEF 600 mg/5ml/kg and 300 mg/5ml/kg. One hour after, rats were anesthetized, intact group was cut the abdomen open and sutured with 2.0 silk thread. RE control group and EEF group were cut the abdomen open, ligated pyloric canal and forestomach with 2.0 silk thread and sutured. Six hour after the operation, rats were sacrified, collected bloods in the abdominal vein, disectted a esophagus and stomach. The stomach was washed a 1 ml PBS and the esophagus was cut longitudinally and pictured a innter mucosa area to research damages in esophagus. Results : The esophagic tissue damage percentage of reflux esophagitis rat was increased compared to that of normal intact group. But esophagic damage percentage of EEF 600 were significantly decreased compared to that of RE control group. But there was no difference on gastric juice pH between control RE, alpha-tocopherol administration rat group and EEF administration rat group. In esophagus of RE control rat, gastric damage occurred severely and injury percentage of mucosa were increased, but EEF 600 mucous inflammatory damage percentage was significantly compared to that of RE control group. Proinflammatory cytokines such as TNF-alpha, IL-1beta and IL-6 in serum on RE control group were markedly grew than those of intact rat, those of vechicle group treated with EEF 600 and EEF 300 were remarkably decreased compared to production of proinflammatory cytokine of RE control group. In microscopic observation, intact group rat had no hyperemia, mucous injury and exclusion, ulcer and edema. But it could showed mucosa damages, submucosa edema and ulcer in RE control. However, administration of EEF 600 and EEF 300 made esophagus have less inflammation and injury by gastric acid. Conclusions : The results suggest that antiinflammatory Effect of EEF could attenuate the severity of reflux esophagitis and prevent the esophageal mucosal damage, and validate its therapeutic use in esophageal reflux disease.
Learning rate is generally applied to estimate an appropriate production labor cost. Learning effect is obtained from repetitive work during the production period under 3 assumptions ; homogeneous production, same producer, quantity measure in continuous unit. However, production breaks occur frequently in Korean defense industry environment because of budget constraint and annual requirements. In this case previous learning effect can not be applied due to learning loss. This paper proposed the application of learning rate when a production break occurs in Korea defense industry. To obtain a learning loss, we surveyed various learning loss factors for different production breaks(6, 12, 18 months) from 4 defense industry companies. Then, we estimate the first unit labor hours in re-production phase after production break using Anderlohr method and Retrograde method with the result of the survey. This work is the first attempt to show a method which defines and evaluates the learning loss factors in Korean defense industry environment.
폐윤활유는 세멘트 킬른과 화력발전소의 직접 연료로 사용하여 에너지원으로 재활용하거나 정제 과정을 거쳐 연료유 또는 재생 윤활기유로 재활용 되고 있다. 우리나라는 주로 이온처리 공정을 활용하여 폐윤활유를 저급 연료유로 재활용하고 있고 2003년도 예치금제에서 생산자 책임재활용제도를 도입하여 폐윤활유의 재활용을 촉진하고 있다. 그러나 지난 5년간 재활용율은 70% 이내로 정체되고 있고 아직까지 선진국에서 추구하고 있는 재생 윤활기유로의 재활용기술 개발연구도 전혀 없는 실정이다. 이에 비하여 일부 선진 국가에서는 근래에 폐윤활유의 열분해 생성유 중의 타르 및 악취의 발생을 대폭 감소시키고 색도를 향상시켜 고급연료유를 생산하는 안정화 기술과 폐윤활유로부터 고급 재생 윤활기유를 생산하는 새로운 공정을 개발하여 상용화하였다. 또한 호주, 이태리, 독일, 미국 등 몇몇 국가에서는 폐윤활유를 재생윤활기유로 재활용하였을 경우 훨씬 많은 보조금을 지급하거나 국가나 지방 정부에서 재생 윤활유를 우선적으로 구매하도록 하고 소비자로 하여금 재생 윤활유를 사용하도록 권장하는 정책을 채택하고 있다. 이렇게 선진국에서는 점차적으로 고갈되는 석유자원의 절약과 환경오염을 저감시키는 폐윤활유를 윤활기유로 재활용하는 정책을 채택하고 있어 우리나라에서도 지속가능한 개발을 위한 새로운 윤활유 재활용정책을 수립하여야할 시점에 있다고 판단된다.
Objective: Feed energy required for pigs is first prioritized to meet maintenance costs. Additional energy intake in excess of the energy requirement for maintenance is retained as protein and fat in the body, leading to weight gain. The objective of this study was to estimate the metabolizable energy requirements for maintenance ($ME_m$) by regressing body weight (BW) gain against metabolizable energy intake (MEI) in growing pigs. Methods: Thirty-six growing pigs ($26.3{\pm}1.7kg$) were allotted to 1 of 6 treatments with 6 replicates per treatment in a randomized complete block design. Treatments were 6 feeding levels which were calculated as 50%, 60%, 70%, 80%, 90%, or 100% of the estimated ad libitum MEI ($2,400kJ/kg\;BW^{0.60}\;d$). All pigs were individually housed in metabolism crates for 30 d and weighed every 5 d. Moreover, each pig from each treatment was placed in the open-circuit respiration chambers to measure heat production (HP) and energy retained as protein ($RE_p$) and fat ($RE_f$) every 5 d. Serum biochemical parameters of pigs were analyzed at the end of the experiment. Results: The average daily gain (ADG) and HP as well as the $RE_p$ and $RE_f$ linearly increased with increasing feed intake (p<0.010). ${\beta}$-hydroxybutyrate concentration of serum tended to increase with increasing feed intake (p = 0.080). The regression equations of MEI on ADG were MEI, $kJ/kg\;BW^{0.60}\;d=1.88{\times}ADG$, g/d+782 ($R^2=0.86$) and $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$. Protein retention of growing pigs would be positive while REf would be negative at this feeding level via regression equations of $RE_p$ and $RE_f$ on MEI. Conclusion: The $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$ in current experiment. Furthermore, growing pigs will deposit protein and oxidize fat if provided feed at the estimated maintenance level.
For many years beak trimming has been a controversial subject, particularly since the 1980's when the practice came under close scrutiny by animal welfare groups. In Australia it is considered an essential practice, averting losses of AUD$17.5m annually by reducing mortality from cannibalism. While mortality in flocks from cannibalism can be reduced from 25% of the flock to virtually nil, the beak trimming procedure is considered traumatic for the bird. This study examined if chronic pain in the beak was evident in birds 10, 20 and 60 weeks after being trimmed at hatch and in another group of birds, 8 and 52 weeks after being re-trimmed at 14 weeks. Chronic pain was assessed by measuring pecking behaviour and beak sensitivity responses. Pecking behaviour studies completed after beak trimming and re-trimming showed no evidence to indicate that birds were suffering severe chronic pain in the beak. Beak trimmed pullets pecked more at the cage and had more toe pecks, yet overall pecks made at the feed and the environment were no different than untrimmed controls. While the beak sensitivity studies provided evidence that the beak of birds trimmed at hatch and also re-trimmed at 14 weeks may be more sensitive there was no evidence that re-trimming resulted in a more sensitive beak than birds trimmed at hatch only. These studies have shown that birds which are beak trimmed and re-trimmed return to apparently normal feeding and pecking behaviour in the long term. However, there was limited evidence that beaks of trimmed birds have an altered threshold to potentially painful stimuli.
Semiconductor manufacturing has suffered from the complex process behavior of the technology oriented control in the production line. While the technological processes are in charge of the quality and the yield of the product, the operational management is also critical for the productivity of the manufacturing line. The fabrication line in the semiconductor manufacturing is considered as the most complex part because of various kinds of the equipment, re-entrant process routing and various product devices. The efficiency and the productivity of the fabrication line may give a significant impact on the subsequent processes such as the probe line, the assembly line and final test line. In the management of the re-entrant process such as semiconductor fabrication, it is important to keep balanced fabrication line. The Performance measures in the fabrication line are throughput, cycle time, inventory, shortage, etc. In the fabrication, throughput and cycle time are the conflicting performance measures. It is very difficult to achieve two conflicting goal simultaneously in the manufacturing line. The capacity of equipment is important factor in the production planning and scheduling. The production planning consideration of capacity can make the scheduling more realistic. In this paper, an input and scheduling rule are to achieve the balanced operation in semiconductor fabrication line through equipment capacity and workload are proposed and evaluated. New backward projection and scheduling rule consideration of facility capacity are suggested. Scheduling wafers on the appropriate facilities are controlled by available capacity, which are determined by the workload in terms of the meet the production target.
The purpose of this study is to analyze the problems associated with the domestic fashion sewing industry and suggest solutions for re-development. The research methods are a content analysis of literature, including articles and reports, and interviewing practitioners who are in charge of the fashion industry. The problems of the domestic fashion sewing industry are as follows. 1. Weakness in price competitiveness and a lack of work. 2. Aging of workers and difficulty securing new workers. 3. The age of the production facilities and the lack of manpower required for mass production. 4. Unrealistically low cost of labor due to over-competition considering the lack of work.5. The prevalence of illegal label grinding. The solutions to the problems listed above are as follows. 1. Establishment of a win-win effort between fashion brands and sewing companies. 2. Allow systematic education, support, and development of a meister system for fostering sewing manpower. 3. Undertake efforts to improve the sewing work environment. 4. Establishment of the system for realizing the actual cost of labor. 5. Establishment of a quota system to secure domestic sewing production. 6. Construction of Smart DB to connect work orders. 7. Construction of a smart factory using technology such as automated systems of production suitable for the 4th Industrial Age. 8. Enforcement of specialized strategies to encourage fashion sewing companies, not only Seoul but also in other urban areas.
본 연구에서는 가정용 전자레인지를 이용하여 간편하고 신속하게 홍삼을 제조하고 제조된 홍삼의 이화학적 특성을 조사하고자 하였다. 홍삼 제조 방법은 가정용 전자레인지의 '해동기능' 13분(A), 가정용 전자레인지의 '조리기능' 6분(B), 가정용 전자레인지의 '해동기능' 44분(C)로 하였다. 전자레인지로 제조된 홍삼의 외관, 분말의 색, 사포닌 조성, 홍삼 제조 시 용출된 사포닌의 양 등을 기존의 일반 홍삼과 비교하였다. 가정용 전자레인지의 '조리기능' 6분(B)과 '해동기능' 44분(C)으로 만든 홍삼은 일반 홍삼과 유사한 색을 가졌다. 전자레인지에 의한 홍삼 제조 시에는 기존 일반 홍삼 제조에 비해 사포닌 손실이 거의 없었다. 전자레인지 홍삼의 총페놀 함량은 일반 홍삼과 유사하였으며, 전자레인지 홍삼의 진세노사이드 함량은 일반 홍삼보다 높았다. 전자레인지 홍삼(A, B)의 진세노사이드 $Rg_1$, Re, Rf, $Rg_2+Rh_1$, $Rb_1$, Rc, $Rb_2$, $Rb_3$, Rd, $Rg_3$ 함량은 일반 홍삼보다 높았으며, 해동 기능 44분의 홍삼(C)은 진세노사이드 $Rg_1$, Re, $Rg_2+Rh_1$, Rc, $Rb_2$, $Rb_3$, Rd, $Rg_3$의 값이 일반 홍삼보다 높았다. 본 연구에서는 가정용 전자레인지를 이용하여 신속하고 간편하게 고기능성의 홍삼을 만드는 방법을 살펴보았고 이로써 인삼 소비 증진 등이 기대된다.
철근 콘크리트 구조물에 다양한 종류의 철근 이음 방법이 개발되고 이를 현장에서 적용하여 왔다. 지난 여러 연구들에 따르면 철근의 직경이 굵어지고 철근의 강도가 커질 경우, 원가 효율 면에서 기계적 이음이 겹침이음보다 상대적으로 우수한 것으로 나타났다. 본 연구에서는 철근 콘크리트 구조물의 고강도 철근(SD600)에 대한 에폭시 충전형 기계적 이음장치를 제시하고 실험을 실시하였다. 이형 철근을 원형 튜브형 강재로 된 커플러에 삽입하고 고강도 에폭시 충전재를 커플러 안으로 주입하면 커플러 안에서 충전재가 경화되면서 이음 장치가 구성된다. 에폭시의 압축강도, 커플러의 길이, 철근의 지름 등에 따른 에폭시 충전형 기계적 이음장치에 대한 일방향 인장시험을 수행하였으며, 실험체의 파괴하중 및 파괴 양상을 관찰하였다. 실험 결과, 실험체의 실제 파괴하중은 에폭시 충전재의 예상 파단 내력의 약 2배 이상으로 나타나 강재 커플러의 구속으로 인하여 경화 에폭시 충전재의 파괴하중이 크게 증가했다는 것을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.