• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.2
• /
• pp.70-78
• /
• 2004

An experimental study on the pressure drop during flow boiling for pure refrigerants Rl34a and R123, and their mixture was carried out in a uniformly heated horizontal tube. Tests were run at a pressure of 0.6㎫ and in the ranges of heat flux 5-50㎾/$m^2$, vapor quality 0-100 percent and mass velocity of 150-600 kg/$m^2$s. Generally, the two-phase frictional multiplier is used to predict the frictional pressure drop during the two-phase flow boiling. The obtained results have been compared to the existing various correlations for the two-phase multiplier. Also, the frictional pressure drop was compared to a few available correlations; The Lockhart-Martinelli correlation considerally overpredicted the frictional pressure drop data for mixture as well as pure components in the entire mass velocity ranges employed in the present study, while the Chisholm correlation underpredicted the present data. The Friedel correlation was found to satisfactorily correlate the frictional pressure drop data except for a low quality region.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.477-479
• /
• 2008

Drawability and other mechanical properties of sheet metals are strongly dependent on their crystallographic orientations. In this paper the formability of the AA 5052 Al alloy sheets was investigated after asymmetric rolling and subsequent heat treatment. In most cases, after asymmetric rolling specimens showed a fine grain size and subsequent heat treated specimens showed that the ND//<111> texture component were observed. The anisotropy of formability is often described by the plastic strain ratios (r-value) as a function of the angle to the rolling direction in sheet metal. For a good formability, a high r-value is required in sheet metals. In the asymmetry rolled and subsequent heat treated Al alloy sheet, the variation of the plastic strain ratios have been investigated in this study. The plastic strain ratios of the asymmetry rolled and subsequent heat treated AA 5052 Al alloy sheets were higher than those of the original Al sheets. These could be related to the formation of ND//<111> texture components through asymmetric rolling in Al sheet.

• Food Science and Biotechnology
• /
• v.27 no.6
• /
• pp.1771-1779
• /
• 2018

Chrysanthemum zawadskii (CZ) is a perennial herb belonging to the Asteraceae family. CZ is used medicinally to treat inflammatory and uterine diseases in Asia. CZ was extracted with 50% ethanol and CZ extract (CZE; at 125, 250, and 500 mg/kg body weight) was administered orally every day for 5 or 6 weeks to investigate the anti-diabetic effects in streptozotocin (STZ)-induced rats and STZ + high-fat diet (HFD)-fed mice. CZE significantly decreased fasting blood glucose levels in STZ- and STZ + HFD-induced diabetic models. In addition, glucose tolerance and insulin tolerance were improved in the STZ + HFD + CZE group by increasing insulin levels and decreasing hemoglobin A1c (HbA1c) levels in serum. Furthermore, CZE supplements decreased components of the serum lipid profile such as triglyceride, total cholesterol, and low-density lipoprotein cholesterol levels. These results suggest that CZE may be a potential candidate for controlling hyperglycemia.

• Korean Journal of Mathematics
• /
• v.29 no.1
• /
• pp.13-24
• /
• 2021

For a finite commutative ring R with identity 1 ≠ 0, the zero divisor graph ��(R) is a simple connected graph having vertex set as the set of nonzero zero divisors of R, where two vertices x and y are adjacent if and only if xy = 0. We find the signless Laplacian spectrum of the zero divisor graphs ��(ℤn) for various values of n. Also, we find signless Laplacian spectrum of ��(ℤn) for n = pz, z ≥ 2, in terms of signless Laplacian spectrum of its components and zeros of the characteristic polynomial of an auxiliary matrix. Further, we characterise n for which zero divisor graph ��(ℤn) are signless Laplacian integral.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.567-569
• /
• 2011

플러그인 프레임워크는 구성요소 간 높은 종속관계 및 낮은 유연성을 해결하고자 개발된 S/W 기반요소로서, 프레임워크를 구성하는 컴포넌트를 플러그인으로 제공하여 구성요소의 추가 및 변경이 동적으로 이루어지게 한다. 이를 통해 소프트웨어 구성을 위해 필요한 컴포넌트들이 동적으로 추가 혹은 변경하여 소프트웨어를 구현 가능하게 되어 소프트웨어의 확장성 및 재사용성을 증대시킨다. 하지만, 플러그인 프레임워크 기반의 소프트웨어 개발 과정은 낮은 종속관계의 구성요소가 결합되어 이뤄지는 만큼, 개별 구성요소의 인터페이스 및 구성요소 간 통합을 사전에 검증할 수 있는 통합시험환경에 대한 필요성이 제기된다. 이에 본 논문은, 동적 구성요소의 개별 인터페이스 검증 및 구성요소 간 통합검증이 가능한 플러그인 프레임워크 기반에서의 통합시험도구에 대해 제안하고, 이에 대한 개략설계내용을 기술한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.65-74
• /
• 2004

The heat transfer coefficient and pressure drop of $CO_2$(R-744) during gas cooling Process of carbon dioxide in a horizontal tube were investigated experimentally and theoretically. The experiments were conducted without oil in the refrigerant loop. The main components of the refrigerant loop consist of a receiver. a variable-speed pump. a mass flowmeter, an evaporator. and a gas cooler(test section). The main components of the water loop consist of a variable-speed Pump. an constant temperature bath. and a flowmeter. The gas cooler is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus The test section consists of smooth, horizontal stainless steel tube of 9.53 mm outer diameter and 7.75 mm inner diameter. The length of test section is 6 m. The refrigerant mass fluxes were 200 ~ 300 kg/($m^2{\cdot}s$) and the inlet pressure of the gas cooler varied from 7.5 MPa to 8.5 MPa. The main results were summarized as follows : The predicted correlation can evaluated the R-744 exit temperature from the gas cooler within ${\pm}10%$ for most of the experimental data, given only the inlet conditions. The predicted gas cooley capacity using log mean temperature difference showed relatively food agreement with gas cooler capacity within ${\pm}5%$. The pressure drop predicted by Blasius estimated the pressure drop on the $CO_2$ side within ${\pm}4.3%$. The predicted heat transfer coefficients using Gnielinski's correlation evaluated the heat transfer coefficients on the $CO_2$ side well within the range of experimental error. The predicted heat transfer coefficients using Gao and Honda's correlation estimated the heat transfer coefficients on the coolant side well within ${\pm}10\;%$. Therefore. The predicted equation's usefulness is demonstrated by analyzing data obtained in experiments.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1285-1292
• /
• 2003

This study was compared each ingredient's local/seasonal change characteristics by analyzing anions and cations, watersoluble ionic components, from the precipitation of Dangjin and Anmyeon-do areas. The samples were collected for 8 months from both spots between the period of April 1, 2002 to November 31, 2002. The precipitation samples were collected continuously through the entire duration of precipitation by using the wet-only automatic samplers. When rain continues to fall over 24 hours or occasionally, we considered those collected from 9 o'clock in the morning for 24 hours as the day's samples. As a method to verify for the reliability of the analyzed data is concerned, we use the ion balance method and the electricity conductance method, was used widely as a way of watching the atmosphere by the WMO(World Meteorological Organization)/GAW (Global Atmosphere Watch). Also, Dangjin and Anmyun-do area confirmed that contains artificial pollutants by analysis of ion concentration data.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.320-328
• /
• 2014

Biodiesel has very similar physical properties (density, kinematic viscosity) and has even higher cetane number compare with conventional diesel. There are no necessity to change or modify the infra-structure & engine system. It is known that fatty acid methyl ester (FAME) is oxygen-contained components increasing the combustibility, biodegradability and reduced the exhaust harmful gas. These things made the biodiesel more popular as an alternative diesel fuel. But biodiesel's sources are controversial issues about $CO_2$ reduction effect at this time because those mainly come from edible plants such as soy, palm, rapeseed already spent lot of $CO_2$ to cultivate. Whereas micro-algae is focused because they are inedible and has rapid growth rates & high carbon-dioxide adsorption rate per area. In this study, we analyze the each FAME components using $GC{\times}GC$-TOFMS in stead of GC-FID and verify the previous total FAME contents method's applicability through the micro algal biodiesel derived from Dunaliella tertiolecta.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.553-558
• /
• 2005

A study on the microstructure, the texture and the formability of the samples after ECAPed and subsequent heat-treated AA 1050 aluminum alloy sheet have been carried out. The specimens after the ECAP showed a very fine grain size, a decrease of <100> // ND, and an increase of <111> // ND textures. The $\{111\}<112>,\;\{123\}<634>,\;\{110\}<001>,\;\{112\}<111>,\;\{110\}<111>,\;and\;\{013\}<231>$ texture components were increased in the specimens after the ECAP and subsequent heat-treatment at $400^{\circ}C$ for 1 hour. One of the most important properties in sheet metals is formability. The r-value or plastic strain ratio has was as a parameter that expressed the formability of sheet metals. The change of the plastic strain ratios after the ECAP and subsequent heat-treatment conditions were investigated and it was found that they were two times higher than those of the initial Al sheets. This could be attributed to the formation above texture components through the ECAP and subsequent heat-treatment of AA 1050 Aluminum alloy sheet.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1470-1476
• /
• 2019

The nuclear power plants in South Korea have been designed in accordance with the U.S. Regulatory Guide 1.60 (R.G 1.60) design spectrum of which the peak frequency range is 2-10 Hz. The characteristics of the earthquakes at the Korea nuclear power plant sites were observed to be closer to that of Central and Eastern United States (CEUS) than the R.G 1.60, which is a lower amplification in a low frequency range, and a higher amplification in a high frequency range. The possibility of failure for sensitive power plant components in the high frequency range has been considered and evaluated. In this study, in order to improve the reliability of nuclear plant and administrative control procedures, seismic tests of an emergency diesel generator (EDG) were conducted using a shaking table under both high and low frequency ranges. From the tests, oil/lubricant leaks from the bolt connections, the fuel filter and the fuel inlet were observed. Therefore, the check list of nuclear plant components after an earthquake should include bolt connections of EDG as well as anchor bolts.