• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.704-713
• /
• 2018

The purpose of this study is to develop a systematic framework that can scientifically and quantitatively evaluate the effectiveness of an LVC training system. The proposed framework is based on QFD(Quality Function Development) methodology. The process of developing the framework begins with identifying various needs of stakeholders related to the introduction of the LVC training system. Then the effectiveness areas and factors are derived based on the needs. The measured effectiveness for each factors on alternatives by L, V, C systems are finally synthesized into the one overall effectiveness of each training system for relative comparison among them. In addition, we developed an Excel$^{TM}$-based tool based on the proposed framework methodology to provide an ease-of-use environment for rapid evaluation on the effectiveness of each training system with the given stakeholder need importance combinations, training scenarios and assets. The suggested framework and the measurement tool are expected to be useful for efficient knowledge-based decision making on an acquisition of the LVC training system.

• 한국지능시스템학회논문지
• /
• 제17권6호
• /
• pp.725-730
• /
• 2007

Otsu의 임계값 결정법, Huang와 Wang의 임계값 결정법 등을 포함한 그레이 레벨 히스토그램에 기반한 임계값 결정법은 영상처리 분야에서 널리 사용되어져 왔다. 이들 기법들은 그 효용성이 뛰어남에도 불구하고 하나의 임계값이 아닌 다중 임계값을 추출하는 경우 많은 연산 시간이 소요되는 단점을 가지고 있다. 즉, 임계값의 개수가 늘어남에 따라 연산 복잡도 역시 기하급수적으로 증가하게 된다 본 논문에서는 가우시안 함수를 이용하여 그레이 레벨간의 상관관계를 측정하고, 가우시안 분포함수와 그레이 레벨의 히스토그램을 결합한 가우시안형 유한 혼합 분포를 이용하여 연산 복잡도가 단순하며 효용성 있는 임계값 결정법을 제안한다. 다수의 영상에 제안한 기법을 적용한 모의실험을 통하여 효용성을 확인하고, Otsu의 임계값 결정법과 제안한 기법의 연산 복잡도 비교를 통해서 제안한 임계값 결정법의 효율성을 보인다.

• BMB Reports
• /
• 제44권4호
• /
• pp.238-243
• /
• 2011

We generated 16,993 expressed sequence tags (ESTs) from two libraries containing full-length cDNAs from the brain and liver of the Korean Jindo dog. An additional 365,909 ESTs from other dog breeds were identified from the NCBI dbEST database, and all ESTs were clustered into 28,514 consensus sequences using StackPack. We selected the 7,305 consensus sequences that could be assembled from at least five ESTs and estimated that 12,533 high-quality single nucleotide polymorphisms (SNPs) were present in 97,835 putative SNPs from the 7,305 consensus sequences. We identified 58 Jindo dog-specific SNPs in comparison to other breeds and predicted seven synonymous SNPs and ten non-synonymous SNPs. Using PolyPhen, a program that predicts changes in protein structure and potential effects on protein function caused by amino acid substitutions, three of the non-synonymous SNPs were predicted to result in changes in protein function for proteins expressed by three different genes (TUSC3, ITIH2, and NAT2).

• 한국통신학회논문지
• /
• 제33권11C호
• /
• pp.955-962
• /
• 2008

멀티캐스트 기법은 큰 규모의 팽 서비스에서 비용을 줄이기 위한 방법 중에 하나다. 그러나 멀티캐스트 시스템에서 한정된 서버와 네트워크의 대역폭을 고려하여 VCR 기능을 구현하는 것은 복잡한 문제들을 내포하고 있어 이에 대한 해법이 필요하다. 따라서 본 연구는 P2Patching을 개선한 논문으로 P2P 환경에서 레벨 그룹을 구성하여 이종 대역폭을 가진 피어들 간에 협력하여 VCR 기능을 지원하는 레벨그룹 스트리밍 기법(LGST : Level Group Streaming Technique)을 제안한다. 이 기법은 서버의 수용성을 향상시키고 네트워크의 대역폭을 효율적으로 사용할 수 있다. 그리고 본 제안 기법의 평가를 위하여 P2Patching과 비교하여 스트림 전송 토플러지 성능 및 스트리밍 질을 실험하였다. 이 실험은 서비스 요청 거부율과 대역폭 감소에 따른 서비스 질에 대한 평가에서는 본 LGST가 P2Patching보다 $11{\sim}18%$ 정도의 성능 향상을 보여주었고, 결함확률에 따른 복원지연 실험과 VCR 기능 수행 주기에 따른 영향에서는 미세한 수치에서의 성능 향상을 보여 주었다.

• 한국지능시스템학회논문지
• /
• 제17권4호
• /
• pp.466-471
• /
• 2007

Otsu의 임계값 결정법을 포함한 기존의 임계값 결정 기법은 그레이 레벨 빈도수 히스토그램 정보를 이용하여 임계값을 결정한다. 그러나 빈도수 히스토그램은 입력 영상에서 그레이 레벨 빈도수 정보만을 재구성한 것이므로, 입력 영상의 그레이 레벨의 분포 및 그레이 레벨간의 관계성을 포함하지 않는다. 따라서 임계값 결정에 있어서 영상의 정보를 충분히 반영하지 못하여 때때로 부적절한 임계값을 제시한다. 본 논문에서는 빈도수 정보뿐만 아니라 그레이 레벨간의 상관관계함수를 정의하고, 정의된 상관관계함수를 이용하여 공간적 상관관계 정보 추출 및 추출된 정보로부터 임계값을 결정하는 기법을 제안한다. 제안된 기법의 타당성을 빈도수 히스토그램에 기반한 Otsu의 임계값 결정법과의 비교 실험을 통하여 보인다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.200-211
• /
• 1999

For many years permanent soft denture liners has been widely used in dental practice directly or indirectly because of its function in absorbing and distributing the impact force. However, it reveals problems such as lack of permanency and decreased bond strength in long term use. The purpose of this study is to measure the bond strength and failure between denture base resin and several permanent liners. Lucitone 199 was used as denture base resin with soft acrylic liners (Triad, Tokuso Rebase) and silicone elastomers (Tokuyama, Ufi Gel C) bonded to measure the tensile strength before and after thermocycling. The thermocycling was done in 2000 cycles at $5^{\circ}C,\;26^{\circ}C\;and\;55^{\circ}C$ and the measured tensile strength values before and after thermocycling were compared. The mode of failure was investigated in the separated specimens. The results are as follows. 1. As to tensile strength, the strongest material is Tokuso Rebase followed by Triad, Tokuyama, Ufi Gel C in before thermocycling and the order of Triad, Tokuso Rebase, Tokuyama, Ufi Gel C in after thermocycling state. There was significant difference between the values of Triad, Tokuso Rebase and Tokuyama, Ufi Gel C(p<0.05). 2. As to degree of displacement, Ufi Gel C showed most displacement with or without thermo-cycling treatment and also the difference was significant with the other materials(p<0.05). 3. As to comparisons before and after thermocycling, Tokuso Rebase and Tokuyama showed significant difference in bond strength, whereas Triad and Tokuso Rebase showed significant difference in the degree of displacement(p<0.05). 4. In debonded specimens, Triad and Ufi Gel C showed adhesion failure and Tokuyama showed cohesion failure. Both failures were observed in Tokuso Rebase with adhesion failure up to 70%. The results of this study showed that degree of bond strength between permanent soft denture liner and denture base resin were variable. There was a significant difference between soft acrylics and silicone elastomers with regard to bond strength. Further research in improving bond strength of widely used silicone elastomers and in developing the method of measuring bond strength between denture base resin and the lining materials is needed.

• International Journal of Automotive Technology
• /
• 제6권1호
• /
• pp.45-52
• /
• 2005

Interrupted creep tests for investigating the structural degradation during creep were conducted for a Mod.9Cr-1Mo steel in the range of stress from 71 to 167 MPa and temperature from 873 to 923 K. The change of hardness and tempered martensitic lath width was measured in grip and gauge parts of interrupted creep specimens. The lath structure was thermally stable in static conditions. However, it was not stable during creep, and the structural change was enhanced by creep strain. The relation between the change in lath width and creep strain was described quantitatively. The change in Vickers hardness was expressed by a single valued function of creep LCR(life consumption ratio). Based on the empirical relation between strain and lath width, a model was proposed to describe the relation between change in hardness and creep LCR. The comparison of the model with the empirical relation suggests that about 65% of hardness loss is due to the decrease of dislocation density accompanied by the movement of lath boundaries. The role of precipitates on subboundaries was discussed in connection with the abnormal subgrain growth appearing in low stress regime.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.60-64
• /
• 2006

Propagation rates ($U_{edge}$) of various premixed, twin edge-flames were measured as a function of global strain rate ($\sigma$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edge-flames can be studied as they propagate along the long dimension of the burner. Experimental results are presented for premixed methane/air twin flames in terms of the effects of $\sigma$ on $U_{edge}$. Both low-$\sigma$ and high-$\sigma$ extinction limits were discovered for all mixtures tested. As a result, the domain of edge-flame stability was obtained in terms of heat loss factor and normalized flame thickness, and comparison with the numerical result of other researchers was also made. For low ($CH_4/O_2/CO_2$) and high ($C_3H_8$/air) Lewis number cases, propagation rates clearly show a strong dependence on Le.

• 대한의생명과학회지
• /
• 제18권3호
• /
• pp.276-282
• /
• 2012

High-intensive endurance exercises induce cell changes in body, changes in structures and functions of the heart, the muscles, the cartilages, and the liver, as well as increase of inflammatory cytokine. The purpose of this study was to estimate the biochemical changes in the liver and muscles during ultra-marathon race (100 km) by sections. The blood of the subjects was collected before the marathon as a control in order to analyze serum creatine kinase (CK), lactic dehydrogenase (LDH), asprtate aminotransferase (AST), alanine aminotransferase (ALT), total(T)-bilirubin, direct(D)-bilirubin, total protein, albumin, uric acid, gamma-glutamyltranspeptidase (${\gamma}$-GTP), alkaline phosphatase (ALP), creatinine, blood urea nitrogen (BUN), and high sensitive C-reactive protein (hs-CRP) concentrations. The CK, LDH, D-bilirubin, AST and ALT concentrations at 50 km and 100 km were significantly increased compared to the control (P<0.05). The markers at 100 km were higher than those at 50 km (P<0.05). The T-bilirubin and hs-CRP concentrations showed no difference among the groups, whereas the markers at 100 km were higher than those of the control and at 50 km (P<0.05). In conclusion, this study shows that the ultra-marathon race (100 km) may induce the damage of the skeletal muscle, liver and kidney, intravascular hemolysis and inflammatory responses.

• 재활복지공학회논문지
• /
• 제2권1호
• /
• pp.5-17
• /
• 2009

골에 삽입한 후 체외고정구에 결합하여 조절함으로써 골절회복(장골의 개방성골절, 연부조직의 재건술 및 관절고정술 등)에 사용되는 금속나사를 특별히 고안한 절삭도구와 연삭기구 및 독자적인 후처리 공정을 통하여 국내기술로 처음 개발, 상품화하였다. 개발된 제품과 수입제품의 비교실험을 실시한 결과, 수입제품대비 평균 103%의 특성을 나타내었다. 이 제품의 개발에 적용된 설계기법 및 후처리 공정과 요소실험 결과들을 소개한다.