• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.704-713
• /
• 2018

The purpose of this study is to develop a systematic framework that can scientifically and quantitatively evaluate the effectiveness of an LVC training system. The proposed framework is based on QFD(Quality Function Development) methodology. The process of developing the framework begins with identifying various needs of stakeholders related to the introduction of the LVC training system. Then the effectiveness areas and factors are derived based on the needs. The measured effectiveness for each factors on alternatives by L, V, C systems are finally synthesized into the one overall effectiveness of each training system for relative comparison among them. In addition, we developed an Excel$^{TM}$-based tool based on the proposed framework methodology to provide an ease-of-use environment for rapid evaluation on the effectiveness of each training system with the given stakeholder need importance combinations, training scenarios and assets. The suggested framework and the measurement tool are expected to be useful for efficient knowledge-based decision making on an acquisition of the LVC training system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.6
• /
• pp.725-730
• /
• 2007

Gray-level histogram-based threshold selection methods such as Otsu's method, Huang and Wang's method, and etc. have been widely used for the threshold selection in image processing. They are simple and effective, but take too much time to determine the optimal multilevel threshold values as the number of thresholds are increased. In this paper, we measure correlation between gray-levels by using the Gaussian function and define a Gaussian-type finite mixture distribution which is combination of the Gaussian distribution function with the gray-level histogram, and propose a fast and effective threshold selection method using it. We show the effectiveness of the proposed through experimental results applied it to three images and the efficiency though comparison of the computational complexity of the proposed with that of Otsu's method.

• BMB Reports
• /
• v.44 no.4
• /
• pp.238-243
• /
• 2011

We generated 16,993 expressed sequence tags (ESTs) from two libraries containing full-length cDNAs from the brain and liver of the Korean Jindo dog. An additional 365,909 ESTs from other dog breeds were identified from the NCBI dbEST database, and all ESTs were clustered into 28,514 consensus sequences using StackPack. We selected the 7,305 consensus sequences that could be assembled from at least five ESTs and estimated that 12,533 high-quality single nucleotide polymorphisms (SNPs) were present in 97,835 putative SNPs from the 7,305 consensus sequences. We identified 58 Jindo dog-specific SNPs in comparison to other breeds and predicted seven synonymous SNPs and ten non-synonymous SNPs. Using PolyPhen, a program that predicts changes in protein structure and potential effects on protein function caused by amino acid substitutions, three of the non-synonymous SNPs were predicted to result in changes in protein function for proteins expressed by three different genes (TUSC3, ITIH2, and NAT2).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.955-962
• /
• 2008

Multicast Strategy is one of the cost-saving methods in the large scale VOD environment. However, it does involve complicated problems to implement VCR-like interactions for user's convenience in the multicast streaming system under considering the limited-server and the network's bandwidth in the multicast-transmission system. Therefore, the proper solution of settling such a problem is necessary. Thus, this paper which revised P2Patching[l] proposes LGST(Level Group Streaming Technique) which supports the VCR's function through cooperation among peers with heterogeneous bandwidth under the environment of P2P. This strategy can reduce latency by improving the acceptance of server and using the bandwidth of network efficiently. And for evaluate the proposed scheme's performance, I simulated the performance of streaming delivery topology and streaming quality in comparison with P2Patching. In evaluation to service request refusal ratio and service quality according to bandwidth decrement, the result of simulation shows that proposed LGST improves about $11{\sim}18%$ of performance than P2Patching. In the test of latency recovery according to fault probability and influence of VCR function operation duration, it shows similar performance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.466-471
• /
• 2007

Conventional thresholding methods including Otsu's thresholding method are based on the gray levels frequency histogram. But the gray levels frequency histogram is obtained by recomposing only frequency information from an input image, where frequency histogram dose not contain any other informations such as the distribution of gray levels and relation between gray levels. Therefore the methods using the gray levels frequency histogram occasionally present inappropriate threshold values because it cannot reflect informations of the given image sufficiently. In this paper, we define a correlation function of gray levels and propose a novel thresholding method using the gray levels frequency histogram and the spatial correlation information. The effectiveness of the proposed method will be shown through comparison with Otsu's thresholding method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.200-211
• /
• 1999

For many years permanent soft denture liners has been widely used in dental practice directly or indirectly because of its function in absorbing and distributing the impact force. However, it reveals problems such as lack of permanency and decreased bond strength in long term use. The purpose of this study is to measure the bond strength and failure between denture base resin and several permanent liners. Lucitone 199 was used as denture base resin with soft acrylic liners (Triad, Tokuso Rebase) and silicone elastomers (Tokuyama, Ufi Gel C) bonded to measure the tensile strength before and after thermocycling. The thermocycling was done in 2000 cycles at $5^{\circ}C,\;26^{\circ}C\;and\;55^{\circ}C$ and the measured tensile strength values before and after thermocycling were compared. The mode of failure was investigated in the separated specimens. The results are as follows. 1. As to tensile strength, the strongest material is Tokuso Rebase followed by Triad, Tokuyama, Ufi Gel C in before thermocycling and the order of Triad, Tokuso Rebase, Tokuyama, Ufi Gel C in after thermocycling state. There was significant difference between the values of Triad, Tokuso Rebase and Tokuyama, Ufi Gel C(p<0.05). 2. As to degree of displacement, Ufi Gel C showed most displacement with or without thermo-cycling treatment and also the difference was significant with the other materials(p<0.05). 3. As to comparisons before and after thermocycling, Tokuso Rebase and Tokuyama showed significant difference in bond strength, whereas Triad and Tokuso Rebase showed significant difference in the degree of displacement(p<0.05). 4. In debonded specimens, Triad and Ufi Gel C showed adhesion failure and Tokuyama showed cohesion failure. Both failures were observed in Tokuso Rebase with adhesion failure up to 70%. The results of this study showed that degree of bond strength between permanent soft denture liner and denture base resin were variable. There was a significant difference between soft acrylics and silicone elastomers with regard to bond strength. Further research in improving bond strength of widely used silicone elastomers and in developing the method of measuring bond strength between denture base resin and the lining materials is needed.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.45-52
• /
• 2005

Interrupted creep tests for investigating the structural degradation during creep were conducted for a Mod.9Cr-1Mo steel in the range of stress from 71 to 167 MPa and temperature from 873 to 923 K. The change of hardness and tempered martensitic lath width was measured in grip and gauge parts of interrupted creep specimens. The lath structure was thermally stable in static conditions. However, it was not stable during creep, and the structural change was enhanced by creep strain. The relation between the change in lath width and creep strain was described quantitatively. The change in Vickers hardness was expressed by a single valued function of creep LCR(life consumption ratio). Based on the empirical relation between strain and lath width, a model was proposed to describe the relation between change in hardness and creep LCR. The comparison of the model with the empirical relation suggests that about 65% of hardness loss is due to the decrease of dislocation density accompanied by the movement of lath boundaries. The role of precipitates on subboundaries was discussed in connection with the abnormal subgrain growth appearing in low stress regime.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.60-64
• /
• 2006

Propagation rates ($U_{edge}$) of various premixed, twin edge-flames were measured as a function of global strain rate ($\sigma$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edge-flames can be studied as they propagate along the long dimension of the burner. Experimental results are presented for premixed methane/air twin flames in terms of the effects of $\sigma$ on $U_{edge}$. Both low-$\sigma$ and high-$\sigma$ extinction limits were discovered for all mixtures tested. As a result, the domain of edge-flame stability was obtained in terms of heat loss factor and normalized flame thickness, and comparison with the numerical result of other researchers was also made. For low ($CH_4/O_2/CO_2$) and high ($C_3H_8$/air) Lewis number cases, propagation rates clearly show a strong dependence on Le.

• Biomedical Science Letters
• /
• v.18 no.3
• /
• pp.276-282
• /
• 2012

High-intensive endurance exercises induce cell changes in body, changes in structures and functions of the heart, the muscles, the cartilages, and the liver, as well as increase of inflammatory cytokine. The purpose of this study was to estimate the biochemical changes in the liver and muscles during ultra-marathon race (100 km) by sections. The blood of the subjects was collected before the marathon as a control in order to analyze serum creatine kinase (CK), lactic dehydrogenase (LDH), asprtate aminotransferase (AST), alanine aminotransferase (ALT), total(T)-bilirubin, direct(D)-bilirubin, total protein, albumin, uric acid, gamma-glutamyltranspeptidase (${\gamma}$-GTP), alkaline phosphatase (ALP), creatinine, blood urea nitrogen (BUN), and high sensitive C-reactive protein (hs-CRP) concentrations. The CK, LDH, D-bilirubin, AST and ALT concentrations at 50 km and 100 km were significantly increased compared to the control (P<0.05). The markers at 100 km were higher than those at 50 km (P<0.05). The T-bilirubin and hs-CRP concentrations showed no difference among the groups, whereas the markers at 100 km were higher than those of the control and at 50 km (P<0.05). In conclusion, this study shows that the ultra-marathon race (100 km) may induce the damage of the skeletal muscle, liver and kidney, intravascular hemolysis and inflammatory responses.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2009

We developed bone-insertion pin screw that can be used for purposed treatment by combining with the external fixator which is the subsidiary tool for the healing of the fracture (open fracture of long bone, reconstruction of soft tissue and arthrodesis etc.) Furthermore, for the frist time, we succeeded in domestic-producing this screw, using specially-designed treating tool stuck on the lathe machine and abrasive blasting machine, and the post-dealing technique and process. In comparison with other foreign products, we could get more desirable results in various tests. This pin screw has 103% characteristics of the average of foreign products. Thus we'd like to introduce design techniques, post-dealing process and result of function tests.