• The Korean Journal of Malacology
• /
• v.29 no.2
• /
• pp.121-127
• /
• 2013

In this study, growth-line analysis was carried out on the hard clam (Meretrix petechialis) collected from the Neolithic shell middens in Daejuk-ri, Seosan, Korea, to reconstruct palaeoenvironment. Growth increments of 206 specimens of the clam were examined. The ages of the specimens were determined from the rings on the shells. The relationship between shell length and ring radius in each ring group was expressed as a regression line, indicating a correspondence in each ring formation. Growth pattern of the midden specimens was compared to that of modern ones collected from Gimje, Jeonbuk. Growth curves for shell length fitted to the von Berta anffy's growth curve were expressed respectively as follows: $SL_t=102.9025[1-e^{-0.18657(t+1.0906)}]$ in the shell midden specimens, $SL_t=104.2583[1-e^{-0.2277(t+0.7499)}]$ in the modern ones. The relationship between shell length (SL; mm) and shell height (SH; mm) was expressed by the following equations: SH = 0.7791 SL + 3.6636 ($R^2$ = 0.946) in the midden specimens, SH = 0.8103 SL + 0.5145 ($R^2$ = 0.991) in the modern ones. The results of the tests regarding the differences between regression coefficients and elevations of growth curves of these two populations demonstrate that the slopes were not significantly different (p < 0.05), but the elevations were (p > 0.05). However, overall growth curves of the midden and modern populations were not significantly different, indicating that shell growth environments of the two areas are similar. Therefore, it is likely that sea temperature near the midden area could be similar to that of present Gimje area, and thus temperature during the period of the midden formation could be higher than presently known.

• Journal of radiological science and technology
• /
• v.29 no.1
• /
• pp.13-19
• /
• 2006

The PET scanner can detect the photon pair arriving from the source in phantom. The number of light photons released by the crystal(scintillator-BGO or LSO). In recent scintillation crystals in block structures were incorporated into full ring systems, and their resulted marked improvement in spatial resolution and increase in a sensitivity to annihilations. The uniformity of the crystal sensitivity is very important to makes correct information of abnormal states in organs. These factors influenced by the dection efficiency of the scintillators. We have study about the uniformity of crystals to the annihilation, And study about the standard deviation to average counts. The relative standard deviation in central detector groups more uniformed than circumferenced detector groups. It is caused detected quanta of gamma ray by the geometrical factors of PET detector. PET cameras are available with different geometric arrangement and several parallel rings oriented in the axial direction. The center groups from 7th to 40th groups are comparatively uniform and sensitive. But at the circumferenced detectors decreased the sensitivity and uniformity.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Journal of architectural history
• /
• v.24 no.6
• /
• pp.57-66
• /
• 2015

As Sri Lanka Stupa had been affected by Indian stupa directly, understanding Sri Lanka Stupa is important to know about the flow of Buddhist Art History, which is showing the variation of Initial Buddhist stupa. Due to invasions and disasters, all Sri Lanka's Stupa collapsed and became random mound. After restoration works, Stupa shape changed dramatically from the Initial shape to Existing shape. Since it is hard to find out how Initial stupas were like, Sanchi Stupa needed to be an example for the comparative study as an Initial shape. Sri Lanka Stupa have Square foundation and 3 Basal rings that are supporting the Main Dome. Entrances are on all 4 sides, Railing and Torana(gate) has never found in Sri Lanka stupa. Sri Lanka stupa has been classified with the shape of Dome into 6~8 types according to "Vijayanta Potha", the Ancient Buddhist Description, and described by several researchers confusingly. With the inconvenience of using unfamiliar words and irrational gap between the Initial Sri Lanka stupa and Existing Sri Lanka stupa, proposing new classification of Sri Lanka Stupa is necessary. Existing Sri Lanka Stupa can be classified into 4 types : which is (1)Bell type, (2)Pot type, (3)Mound type, (4)Bubble type. This suggestion is for further studies to use Easier and shorter words to describe the types and make it reasonable to use, since the current classification includes 3 stupa types even there is no case for any of them. Restrict Stupa Classifications within existing Sri Lanka Stupa is needed because the current classification had been continued for hundreds of years without any adjustments. Bell type is mainly located in Anuradhapura. Pot type and Mound type is only found in limited area, and Bubble type is located in most area of Sri Lanka.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.1-16
• /
• 2013

Xiognu people were the first of the Central-Asian nomads to establish a nation in 209 B.C. They always moved around looking for places to breed their animals and fertile grounds, so they wore clothes made of fur and leather and covered their tents with felt from the livestock. This research studies on the literatures, costumes and the achievement of archaeological excavation. Furthermore, to investigate on costumes excavated of Xiongnu, we visited the Mongolian National Museum and the Hermitage Museum. A corn-hat made of felt, a felt hat with ear flaps and a golden crown with a bird on the top were unearthed from a tomb of Xiongnu in Inner mongolia. Women usually wore pigtails, and men wore pigtails or ponytails but they cut their hair short when holding a funeral. Many pigtails discovered in Noyon uul tombs can be considered as their funeral customs. The Xiongnu wore a round or v-neck caftan attached straight sleeves reaching knees in the left folded style, and because they always rode horses, having the length of the caftan not go past their buttocks would have made it more convenient for them. During the period of Western Han, Ho refered to Xiongnu and it became a common name for northern races. They used leather belts and an animal-designed buckle was found. Women commonly rouged their cheeks for a vivid and cute look, and many ornaments were excavated including bracelets, rings and decorations made of gold, silver, copper and jade, among which there were hair ornaments used to identify one's class. A horse pattern with wings and a horn of Golmod T20 was substitution for the Schythian use of deer. Patterns or shape of unearthed articles present in the Xiongnu culture in Noyon uul had a close relationship with Altaic, Greek and Persian cultures. The Xiongnu clothing was made of animals' skin and fur, woolen textiles and felt. It was folded to the left for upper garments, and the pants were adjusted using a belt and shoes were made of leather, which was very suitable for protection against the cold and horse riding. Mobility played a significant role in their clothing.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.2
• /
• pp.83-94
• /
• 1979

It is more than half a century since anchovy boat seine has been introduced in Korean fishery to catch anchovies, but the study on it was began in 1970's by the authors. In 1971, the authors carried out an experiment about the net formation of the traditional gear in tow by using model net, and in 1978, about the patti net gear, commercially used in Japan. Now, the authors investigated the new model net, model 79, expecting to be suitable for commercial fishery in Korea, with the strong point of those two gears kept and the weak point of them corrected. The experimental gear was constructed attached the long net pendants to the fore end of extension wing by shortening its length in two-third of the traditional gear. Inside wing was improved so as to show high opening in tow. Rubber bobbins and hanging rings are used to prevent the heavy friction of bosom ground rope against the sea bed. The gear was used to catch anchovies in the commercial fishing ground in the south-eastern coastal waters of Korea, from May to October in 1979. From the experiment, the following results are found. 1. In opening height, the experimented gear was 30 percent greater than the traditional one. 2. It took 3 to 5 minutes for the bosom ground rope to sink from the surface to the sea bed, while 10 to 15 minutes for the traditional gear to do. 3. Ground rope never scooped mud, even in the muddy sea bed. 4. The gear showed better catchability than the traditional gear.

• Nutrition Research and Practice
• /
• v.10 no.3
• /
• pp.342-351
• /
• 2016

BACKGROUND/OBJECTIVES: This study aims to develop a mobile nutritional management program for integration into the already developed web-based program, Diabetes Mellitus Dietary Management Guide (DMDMG) for diabetic patients. Further, we aim to evaluate the amended DMDMG program. SUBJECTS/METHODS: The mobile application based on an Android operating system includes three parts: 1) record of diet intake, which allows users to take pictures of the meal and save to later add diet records into DMDMG; 2) an alarm system that rings at each meal time, which reminds users to input the data; 3) displays the diet record and the results of nutrient intake, which can be also viewed through the web program. All three parts are linked to the web-based program. A survey was conducted to evaluate the program in terms of nutrition knowledge, dietary attitude, eating behavior and diet intake by non-equivalent control group design among diabetic patients with 14 DMDMG users and 12 non-user controls after a one-month trial of DMDMG. RESULTS: Non-users did not use the program, but participated in the weekly off-line nutrition classes for one month. The program users showed increased healthful dietary behavior (P < 0.01) and dietary attitude scores (P < 0.05). More DMDMG users had higher nutrition knowledge scores after one-month trial than non-users. However, dietary intake significantly increased in non-user group for calcium and sodium (P < 0.05) while the user group did not show significant changes. CONCLUSIONS: The program has created positive changes in patients' dietary life. All the users were satisfied with the program, although some expressed minor difficulties with an unfamiliar mobile app.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.515-525
• /
• 2016

The Palsangjeon Pagoda is a five-story wooden building in the Beopjusa Temple area in the Songnisan national park in Chungcheongbuk-do, Korea. According to historical records, it was constructed in either AD 1605 or AD 1626. To specify the construction year more precisely, we took 41 wood samples for tree-ring analysis during repair actions in 2013; 28 from red pine (Pinus densiflora S. et Z.), 12 from oak (Quercus spp.), and 1 from fir (Abies spp.). The tree-ring boundaries became clearly visible by smoothing their cross-sectional surface and the tree-ring widths were measured under a stereo microscope. All tree-ring series were compared with each other to establish mean chronologies, which we then compared with local master chronologies established using tree rings collected from wooden elements of the Daeungjeon Hall which is the main building in the Beopjusa Temple area. As a result, it was verified that the red pines were felled in AD 1624 and in AD 1851. Moreover, it was verified that the oaks were also felled in AD 1624 based on cross-dating with the red pine chronology. We concluded that the Palsangjeon Wooden Pagoda was constructed in AD 1626, as mentioned in the historical record (Daeungdaekwangmyeongjeonbulsangki, 1630) and the letters on a purlin on the $4^{th}$ story, using oak and red pine felled in AD 1624 and repaired later on using red pine felled in AD 1851.

• The Korean Journal of Ecology
• /
• v.18 no.1
• /
• pp.189-201
• /
• 1995

In order to clarify regeneration processes and mechanisms of the disturbed Pinus densiflora forest, responses of Pinus densiflora to gap formed by disturbance were analysed by growth of saplings and mature and growth equations were obtained from branch growth of mature trees and height growth of saplings, and age distribution of saplings and young trees recruited within gap was analysed in relation to gap age. Height growth of saplings within gaps was accelerated after gap formation. Such abrupt increases of growth of saplings after the gap formation might be resulted in the difference of growth of saplings between gap and non-gap areas. In fact, height and diameter of saplings in the central part of gap were larger than those of saplings in marginal parts of gap and non-gap area. However, density of saplings was not different in both parts. In addition, growth of annual rings of mature trees bordering on gap also increased after gap formation. Branch growth of mature trees bodering on gap was 6.3 - 6.5 cm /year and the mean radius of gaps created by death of only one canopy tree was about 3 m. Therefore, for those gaps to be closed by branch growth it will take 46 years. Growth of saplings within gap showed exponential equation. Fifty years will be required for the saplings to enter the forest canopy by the exponential growth equation. Therefore, gap created by only one tree might be closed by branch growth of surrounding canopy trees in advance of being done by height growth of saplings. But gaps created by death of trees more than 2 will be closed by the growth of saplings. Among the regenerating saplings and young trees within gaps, individuals established in advance of gap formation were more than those established after the gap formation. From these results, it was assumed that the disturbed Pinus densiflora forests in these sites were regenerated by height growth of saplings recruited in advance of gap formation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.686-695
• /
• 2002

Samples of Corbicula ( Corbicula) japonica Prime of Namdae Stream in Gangnung were collected from November 2000 to October 2001. Age of C. (C.) japonica was determined from the rings on the shell, The shell length of the samples ranged from 8 mm to 38 mm. The ring on the shell was formed once a year in March. Von Bertalanffy's growth parameters were estimated using a nonlinear regression method, asyinptotie shell length ($L_{\omega}$) was 48,98 mm, K was 0.20421year, theoretical age at 0 shell length $(t_0)$ was 0.3169 year, and asymptotic total weight ($W_{\omega}$) was 41.37 g. The formula of allomeky between shell length (L, mm) and total weight (W, g) of the brackish water clam was W=3.42$\times$10^{-4}L^{3}. The annual survival rate was estimated at 0.3799, instantaneous coefficient of natural mortality was 0.5007/year, and instantaneous coefficient of fishing mortality was 0.46721year. The age at first capture was estimated at 2.1593 year using shell length compositions of the brackish water clam, The current yield-per-recruit at 0.4672/year of fishing mortality was 0.6595 g. F_0.1 was estimated at 0.1865/year, Acceptable biological catch was estimated at 14.4 metric ton.