• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.427-436
• /
• 2001

Objective : To estimate the prevalence of congenital heart disease from the 1990 student heart disease screening program. Methods : The heart disease screening program for elementary students was conducted in Kyonggi-do, in 1998. The subjects of the present study comprised the 40,402 students who attended the schools in the catchment area of a collaborative university hospital and who participated in the primary examination. The congenital heart disease (CHD) patients were initially identified through a questionnaire about prior medical history, and further through diagnostic tests & medical examinations in the secondary & the tertiary examinations. Certain assumptions were used in the estimation of the number of CHD cases among non-participants of the secondary & tertiary examinations. The overall prevalence of CHD was estimated by adding the CHD detection rates of the participants and the estimated prevalence of the non-participants. Results : Among the 40,402 primary participants, 1,655 were referred further, of whom 79.1% (1,309) participated in the secondary examination. Of these, 121 were referred to the tertiary examination, with a participation rate at this last stage of 80.2%. The positive predictive value (PPV) of the screening tools was the highest when the results of both EKG and the questionnaire were positive. Because 85.9% of the detected cases had a past history of CHD, PPV was higher when the selection criteria in the questionnaire included past CHD history than when it didnt. The CHD defection rate among the participants was 1.76 cases/1,000 and the presumed number of cases among the non-participants was 31; giving an estimated final CHD prevalence of 2.52 cases/1,000 (95% CI : 2.06-3.06). Among the identified cases of CHD, VSD (52.8%) was the most common, followed by PDA (9.7%), TOF (9.7%) & PS (9.7%). Conclusion : Because the characteristics of the non-participants differed from those of the participants, the estimation of prevalence was influenced by the participation rate. Of the detected cases, 85.9% had a past history of diagnosis or operation for CMD. These findings suggested that the prevalence estimated in this study may be an underestimation of the actual condition. Therefore, a birth cohort study is required in order to more accurately estimate the prevalence and the effects of the program.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.38-42
• /
• 2014

The poly[(9,9-bis((6'-(N,N,N-trimethylammonium)hexyl)-2,7-fluorene)-alt-(9,9-bis(2-(2-(2-methoxyethoxy)ethoxy)ethyl)-9-fluorene)) dibromide (WPF-6-oxy-F)] and graphene oxide (GO) was blended and irradiated with gamma ray under ambient condition. This WPF-6-oxy-F-GO composite was investigated as a hole-transporting layer (HTL) in organic solar cells (OSCs). Compared with the pristine GO, the sheet resistance ($R_{sheet}$) of irradiated WPF-6-oxy-F-GO was decreased about 2 orders of magnitude. The reason for the decrease of $R_{sheet}$ is the effect of efficient ${\pi}-{\pi}$ packing resulted from the formation of C-N bond between WPF6-oxy-F and GO. As a result, the efficiency of OSCs was dramatically enhanced ~ 6.10% by introducing irradiated WPF-6-oxy-F-GO as a HTL. WPF-6-oxy-F-GO is a sufficient candidate for HTL to facilitate the low-cost and high efficiency OSCs.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.17-21
• /
• 2019

In this study, selective laser sintered 3D printing mold core and metal core were used to investigate the difference of the thickness shrinkage from the gate of the injection molded part at a constant interval. SLS 3D printing mold core was made of nylon-based PA2200 powder and the metal core was manufactured by conventional machining method. As the PA2200 powder material has low strength, thermal conductivity and high specific heat characteristics compared with metal, molding conditions were set with the consideration of molten temperature and injection pressure. Crystalline resin(PP) and amorphous resin(PS) with low melting temperature and viscosity were selected for the injection molding experiment. Cooling time for processing condition was selected by checking the temperature change of the cores with a cavity temperature sensor. The cooling time of the 3D printing core was required a longer time than that of the metal core. The thickness shrinkage of the molded part compared to the core depth was measured from the gate by a constant interval. It was shown that the thickness shrinkage of the 3D printing core was 2.02 ~ 4.34% larger than that of metal core. In additions, in the case of metal core, thickness shrinkage was increased with distance from the gate, on the contrary, in the case of polymer core showed reversed aspect.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.8-8
• /
• 1987

This paper describes on the distribution of the vibration and the noise produced on a skipjack pole and line training ship M/S Pusan 403 (243GT, 1,000ps) under the cruising or drifting condition. The vibration and the noise level were measured by use of protable vibration analyzer (B and K 3513) and sound level meter (B and K 2205), and so the vibration level was converted into dB unit. The check points were set through every decks and around important places of the ship. The results obtained can be summarized as follows: 1. The vibration and the noise level 1) On the main deck, both the vibration and the noise level were highest at the vertically above the main engine, whereas the vibration level was the lowest in the bow store and the noise level beneath the bridge. 2) Under cruising condition, the vibration level around the cylinder head of main engine, port side of the engine room, on the shaft tunnel was 80, 67, 65 dB and the noise level 104, 87, 86 dB, respectively. 3) The vibration level on the vertical line passing through the bridge was the highest at the orlop deck with 60 dB and the lowest on the bridge deck with 55 dB, whereas the noise level the highest at the compass deck with 75 dB and the lowest at the orlop deck with 53 dB. 4) The vibration and the noise level on the open decks were the highest with 65 dB and 84 dB on the boat deck, whereas the vibration level was the lowest at the lecture room with 51 dB and the noise level the lowest at the fore castle deck with 57 dB. 5) On the orlop decks, both the vibration and the noise level were the highest at the engine room with 65 dB and 85 dB, and the lowest at bow store with 54 dB and 52 dB, respectively. Comparing with the vibration level and the noise level, the vibration level was higher than the noise level in the bow part and it was contrary in the stern part of the ship. 2. Vibration analysis 1) The vibration displacement and the vibration velocity were the greatest at the cylinder head of main engine with 100μm and 11mm/sec, and were the smallest at the compass deck with 3μm and 0.07mm/sec. They were also attenuated rapidly around the frequency of 100Hz and over. 2) The vibration acceleration was the greatest at the cylinder head with the main frequency of 1KHz and the acceleration of 1.1mm/sec super(2), and the smallest at the compass deck with 30KHz and 0.05mm/sec super(2).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.54-60
• /
• 1987

This paper describes on the distribution of the vibration and the noise produced on a skipjack pole and line training ship M/S Pusan 403 (243GT, 1,000ps) under the cruising or drifting condition. The vibration and the noise level were measured by use of protable vibration analyzer (B and K 3513) and sound level meter (B and K 2205), and so the vibration level was converted into dB unit. The check points were set through every decks and around important places of the ship. The results obtained can be summarized as follows: 1. The vibration and the noise level 1) On the main deck, both the vibration and the noise level were highest at the vertically above the main engine, whereas the vibration level was the lowest in the bow store and the noise level beneath the bridge. 2) Under cruising condition, the vibration level around the cylinder head of main engine, port side of the engine room, on the shaft tunnel was 80, 67, 65 dB and the noise level 104, 87, 86 dB, respectively. 3) The vibration level on the vertical line passing through the bridge was the highest at the orlop deck with 60 dB and the lowest on the bridge deck with 55 dB, whereas the noise level the highest at the compass deck with 75 dB and the lowest at the orlop deck with 53 dB. 4) The vibration and the noise level on the open decks were the highest with 65 dB and 84 dB on the boat deck, whereas the vibration level was the lowest at the lecture room with 51 dB and the noise level the lowest at the fore castle deck with 57 dB. 5) On the orlop decks, both the vibration and the noise level were the highest at the engine room with 65 dB and 85 dB, and the lowest at bow store with 54 dB and 52 dB, respectively. Comparing with the vibration level and the noise level, the vibration level was higher than the noise level in the bow part and it was contrary in the stern part of the ship. 2. Vibration analysis 1) The vibration displacement and the vibration velocity were the greatest at the cylinder head of main engine with 100$\mu$m and 11mm/sec, and were the smallest at the compass deck with 3$\mu$m and 0.07mm/sec. They were also attenuated rapidly around the frequency of 100Hz and over. 2) The vibration acceleration was the greatest at the cylinder head with the main frequency of 1KHz and the acceleration of 1.1mm/sec super(2), and the smallest at the compass deck with 30KHz and 0.05mm/sec super(2).

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.588-596
• /
• 2006

The surface of polystyrene membrane treated by Ar, $O_2$ plasma, and the effects were observed before and after the treatment and permeability of $CO_2$, $N_2$ and selectivity of $CO_2$ relative to $N_2$ was measured using continuous flow gas permeation analyzer (GPA). The mole ratio of O over C in the surface was increased from 0 to 0.179 with Ar plasma treatment and route mean square of surface was increased from $15.86{\AA}$ to $71.64{\AA}$. Therefore the contact angle was decreased from $89.16^{\circ}$ to $18.1^{\circ}$. Thus Plasma treatments made surface of membrane tend to be highly hydrophilic. The optimum condition for the $CO_2$ permeability and ideal selectivity of the plasma treated membrane was as follows: the measurement of Ar (60 W, 2 min, $70^{\circ}C$) plasma treatment was $1.14{\times}10^{-12}[m^3(STP){\cdot}m/m^2{\cdot}sec{\cdot}atm]$ and 4.22. In the case of $O_2$ plasma treatment, the contact angle was decreased at $13.56^{\circ}$ with increase of O/C ratio ($0.189{\AA}$) and route mean square of surface ($57.10{\AA}$). The optimum condition for the $CO_2$ permeability and ideal selectivity of the plasma treated membrane was as follows: the measurement of $O_2$ (90 W, 2 min, $70^{\circ}C$) plasma treatment was $7.1{\times}10^{-12}[m^3(STP){\cdot}m/m^2{\cdot}sec{\cdot}atm]$ and 11.5. After plasma treatment, the changes of membrane surface were all subtly linked with both cross-linking and etching effects. Finally, it was confirmed that the gas permeation capacity and selectivity of the modified membrane with plasma could be improved by an appropriate control of the plasma conditions such as treatment time, the power input and sort of plasma gas.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.4
• /
• pp.234-241
• /
• 2000

Organic farming (OF) is regarded as alternative farming types against general farming system for sustainable agriculture, recently. However, there is little information on effects of OF on soil properties and watershed condition. In order to determine the effects of OF on soil properties, 36, 10 and 8 sites of organic farming (OF) fields of plastic film houses, paddy and orchard were selected in the national scale, respectively, to evaluate their chemical properties and phosphorus distributing characteristics. The average organic matter (OM) contents in organic farming fields were with $44g\;kg^{-1}$ in plastic film houses, $26g\;kg^{-1}$ in paddies and $39g\;kg^{-1}$ in orchard soils higher than the average OM contents in conventional farming (CF) soils. Available phosphates were accumulated to 986 in plastic film house soils and $754mg\;kg^{-1}$ in orchard soils, respectively, over the optimum range. Furthermore, total P (T-P) reached to $2.973mg\;kg^{-1}$ in plastic film houses and $2303mg\;kg^{-1}$ in orchards in OF soils. It could be attained by applying repeatedly low N/P ratio of manure-based compost. In two types of soils inorganic P was dominant with the ratio of 62~80% of T-P, and then residual and organic Ps followed. However. residual-P was dominant in paddy soils with the rate of 50% of T-P. Fractionation of soil extractable P showed that Ca-P was dominant with about $1,330mg\;kg^{-1}$ in upland soils in OF fields, which is affected by high soil pH of over 6.0. However. Fe-P of extractable P was dominant in paddy soils. Water-soluble P was very high with 65 and $26mg\;kg^{-1}$ in plastic film house and orchard soils in OF. From this results. OF regarded as an environment-friendly farming system may cause serious soil deterioration by accumulated phosphorus and may also cause water pollution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.941-947
• /
• 2013

To increase the consumption of frying ginseng, we investigated the physicochemical properties of frying ginseng and different edible oils processed through frying ginseng: soybean oil (SO), corn oil (CO), olive oil (OO), and grape seed oil (GO). We tested various parameters, including temperature (130, 160, 180, and $200^{\circ}C$), frying time (2.0, 2.5, 3.0, and 3.5 min), and frying amount (up to 30 times). The physicochemical properties of the fried ginseng and oils were evaluated for changes in acid value, peroxide value, free fatty acid content, acrylamide formation, color, and viscosity of oils. The acid value and peroxide value of the oils increased with frying temperature and amount. Saturated fatty acids increased and unsaturated fatty acids decreased with the amount of frying, but oleic acid in CO and GO and linoleic acid in OO increased. The concentration of acrylamide in fried ginseng increased as the frying temperature and amount increased and was the lowest in OO. The lightness and redness of the frying oil color decreased and its yellowness increased in SO and CO, but the lightness increased (redness and yellowness decreased) in OO. In particular, CO was significantly browned with increasing frying amounts. The viscosity of the frying oils increased with frying amount, with CO showing the lowest increases in viscosity of the oils. As a result, the optimal ginseng frying condition found was 2 min 30 sec at $180^{\circ}C$, regardless the type of oils.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.554-562
• /
• 2007

Ceramide rich intercellular lipid lamellae are thought to be particularly important in maintaining the structural integrity of epidermal barrier. Ceramide is synthesized de novo by serine palmitoyltransferase (SPT) phospholipid intermediates, serine and palmitic acid persist within the stratum corneum. The ceramide which is synthesized is degraded with fatty acid and sphingosine by degradative enzyme ceramidase. The depletion of ceramide in stratum corneum was reported in the atopic dermatitis. As an effort to search for the dietary source for improving the level of ceramide in epidermis, the dietary effects of various-typed silk protein were compared. Seventy male NC/Nga mice, an animal model of atopic dermatitis, were divided into seven groups: group CA as an atopic control with control diet, group S: 1% crude sericin diet, group F: 1% crude fibroin diet, group PS : peptide pattern of sericin(Mw 5000), group PF: peptide pattern of fibroin (Mw 1500), group AS: manufactured the same as amino acid profile of sericin and group AF: manufactured the same as amino acid profile of fibroin. Ten male BALB/c mice were served as group C (control group) control diet. All mice were fed on diet and water ad libitum for 10 weeks. Dry skin condition was established in group CA as ceramide content was decreased. Despite a marked decrease of mRNA and prorein expression of SPT, enzyme do novo synthesis, ceramide content of group S was dramatically increased by inhibiting the mRNA and protein expression of degradative enzyme ceramidase. However, dietary supplementation of crude silk fibroin protein (group F) and in other groups that were supplemented with either amino acid or peptide type of sericin or fibroin did not increase the level of ceramide. Together, our data demonstrate that dietary supplementation of crude sericin is more effective at improving ceramide level in epidemis of NC/Nga mice.