• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.324-324
• /
• 2010

최근에는 압전체의 환경오염 문제의 해결 및 가격경쟁력을 갖추기 위해서 비납계 압전체에 대한 연구가 활발히 진행되고 있다. (Na,K)$NbO_3$ 계는 페로브스카이트 구조를 가지는 비납계 세라믹스로 현재 가장 많이 연구되고 있는 물질 중의 하나이다. 본 연구에서는 압전성이 우수한 $(Na_{0.44}K_{0.52}Li_{0.04})(Nb_{0.9}Ta_{0.04}Sb_{0.06})O_3$ 조성에 CuO, $Cu_2O$ 등의 Cu 산화물을 첨가하였을 때의 전기기계결합계수, 기계적품질계수, 비유전율, 압전전하상수, 문극-전계 이력곡선 (P-E hysteresis curve) 등을 변화를 평가하고자 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.172-173
• /
• 2008

In this study, $0.95(K_{0.5}Na_{0.5})NbO_3$-0.05Li$(Sb_{0.8}Nb_{0.2})O_3$ + $Ag_2O$ + x wt% $MnO_2$ were investigated as a function of the amount of $MnO_2$ addition in order to improve dielectric and piezoelectric properties of Lead-free piezoelectric ceramics. With increasing the amount of $MnO_2$ addition, density and electromechanical coupling factor $(k_p)$ increased up to 0.3wt.% $MnO_2$ and decreased above 0.3wt.% $MnO_2$. At the sintering temperature of 1020 $^{\circ}C$, Electromechanical coupling factor $(k_p)$, density, dielectric constant $({\varepsilon}r)$ and mechanical quality factor $(Q_m)$ of composition ceramics with 0.4wt% $Ag_2O$ addition showed the optimal value of 0.431, 4.33 g/$cm^3$, 820 and 119, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.506-510
• /
• 2012

In this study, lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics were fabricated by conventional mixed oxide method. Structural and electrical properties of lead-free $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ ceramics with the variation of sintering temperature were investigated. As results of x-ray diffraction analysis, all specimens showed a typical polycrystalline perovskite structure without presence of the second phase. Sintered density increased with an increases of sintering temperature and the specimen sintered at $1,020^{\circ}C$ showed the maximum value of 4.5 $g/cm^3$. The average grain size of the $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimen sintered at $1,020^{\circ}C$ is about 0.83 ${\mu}m$. Electromechanical coupling factor, relative dielectric constant and dielectric loss of $(Na_{0.465}K_{0.465}Bi_{0.07})(Nb_{0.93}Ti_{0.07})O_3-0.08MnO_2$ specimens sintered at $1,020^{\circ}C$ were 0.252, 741 and 0.043% respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.3
• /
• pp.205-209
• /
• 2009

In this study, in order to develop the composition ceramics for lead-free ultrasonic motor, (1-x-0.09)$NaNbO_{3-x}BaTiO_3-0,09LiNbO_3$ ceramics were fabricated using a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated according to the $BaTiO_3$ substitution. All the specimens showed orthorhombic phase structure without secondary phase, $BaTiO_3$ substitution enhanced density, dielectric constant(${\epsilon}_r$) and electromechanical coupling factor($k_p$), However, mechanical quality factor was deteriorated. Curie temperature of specimens was observed as about $380^{\circ}C$. At the $BaTiO_3$ substitution of 4 mol%, density, electromechanical coupling factor($k_p$), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of specimen showed the optimum value of $4.493g/cm^3$, 0.236, 175, 70 pC/N, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.72-75
• /
• 2011

In this study, $(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3+0.9$ mol% $K_{5.4}Cu_{1.3}Ta_{10}O_{29}+x$ mol% $K_4CuNb_8O_{23}$ (x = 0, 0.2, 0.6, 0.8) ceramics were prepared by a conventional mixed oxide method. Their microstructure and electric properties were investigated. The secondary phase was made by virtue of $K_4CuNb_8O_{23}$ (KCN) addition in the $(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3$ system ceramics. However, the sinterability of the ceramics increased with increasing $K_4CuNb_8O_{23}$ content. At the 0.6 mol% $K_4CuNb_8O_{23}$ added composition ceramics sintered at $1,060^{\circ}C$, kp and $d_{33}$ showed the optimum values of 0.39 and 145 pC/N, respectively, suitable for piezoelectric actuator application.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.839-845
• /
• 1995

The structural and dielectric properties of Pb(Mg1/3Nb2/3)O3 ceramics substituted by Nd3+, La3+, K+ and Na+ were studied over 0~50 at.% substituent content. The 1 : 1 ordering behavior of Mg2+ and Nb5+ ions in the B site sublattice was observed in Nd3+-and La3+-modified compounds. The degree of ordering was increased with Nd3+, La3+ content in the compounds. But K+-or Na+-modified compounds did not exhibit the ordering behavior. This was explained by charge and size effect of A and B site cations and oxygen vacancies. As the mole fractions of substituent increased, the maximum values of dielectric constants were rapidly decreased and the phase transitions were broadened. Phase transition temperature was correlated with the covalency of A-O and B-O bonding.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.49-51
• /
• 1997

New complex perovskite compounds (Na0.5Sr0.5)(Ti0.5Nb0.5)O3, (Na0.5Sr0.5)(Zr0.5Ti0.5)O3 and (Na0.5Sr0.5)(Ti0.5Ta0.5)O3 have been prepared. The crystal structures of these compounds were determined by powder X-ray Rietveld analysis. The crystal structure of (Na0.5Sr0.5)(Ti0.5Nb0.5)O3 and (Na0.5Sr0.5)(Zr0.5Ta0.5)O3 was Pmmn, and that of (Na0.5Sr0.5)(Ti0.5Nb0.5)O3 was I4/mmm. All these compounds showed the superstructure due to the oxygen octahedron distortion. The selected bond distances and bond angles were calculated by the OFFER. The octahedron distortion for each sample, which was measured from the bond distances and bond angles, showed the following order: (Na0.5Sr0.5)(Z0.5Ta0.5)O3> (Na0.5Sr0.5)(Ti0.5Nb0.5)O3 > (Na0.5Sr0.5)(Ti0.5Ta0.5)O3. Dielectric properties were measured for the samples. In this study, the crystal structure and dielectric properties of the new complex perovskite structures and discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.315-316
• /
• 2006

Dense $0.95(Na_{0.5}K_{0.5})NbO_3-0.05LiTaO_3$ (NKN-LT) ceramics were developed by conventional sintering process. Sintering temperature was lowered by adding $Na_2O$ as a sintering aid. The electrical properties of NKN-LT ceramics were investigated as a function of $Na_2O$ concentration. When the sample sintered at $1000^{\circ}C$ for 4h with the addition of 1 mol% $Na_2O$, electromechanical coupling factor ($k_p$) and piezoelectric coefficient ($d_{33}$) of NKN-LT ceramics were found to reach the highest values of 0.43 and 190 pC/N, respectively.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1465-1466
• /
• 2011

We have studied structural and electrical properties of $(Na_{0.5}K_{0.5})NbO_3$ ceramics addition with $BiTiO_3$. The $(Na_{0.5}K_{0.5})NbO_3-BiTiO_3$ ceramics were fabricated by the conventional mixed oxide method, their dielectric and piezoelectric properties were investigated with the variations of additvie amount $BiTiO_3$. At the sintering temperature of $1130^{\circ}C$, the density, dielectric constant, grain size of 0.05mol% $BiTiO_3$ specimen showed the values of 4.69 g/$cm^3$, 898 and $24.8{\mu}m$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.925-929
• /
• 2009

In this study, $0.95(K_{0.5}Na_{0.5})NbO_3-0.05Li(Sb_{0.8}Nb_{0.2})O_3$ ceramics were investigated as a function of the amount of $Ag_2O$ addition in order to improve dielectric and piezoelectric properties of lead-free piezoelectric ceramics. With increasing the amount of $Ag_2O$ addition, density and electromechanical coupling factor ($k_p$) increased up to 0.2 wt.% $Ag_2O$ and decreased above 0.2 wt.% $Ag_2O$. At the sintering temperature of $1020^{\circ}C$, electromechanical coupling factor ($k_p$), density, dielectric constant (${\varepsilon}r$) and curie temperature (Tc) of ceramics with 0.2 wt% $Ag_2O$ showed the optimal values of 0.42, $4.33\;g/cm^3$, 738 and $393^{\circ}C$, respectively.