• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1236-1241
• /
• 2017

We deposited Al-doped ZnO (ZnO:Al) thin films on glass substrates ($200mm{\times}200mm$) by using in-line magnetron sputtering system. Effects of various deposition parameters such as working pressure, deposition power and substrate temperature on optoelectronic characteristics including surface-texture etching profiles were carefully investigated in this study. We found that relatively low working pressure and high deposition power offered to obtain enhanced conductivity and optical transmittance. Haze properties showed similar trend with the transmittance. Furthermore, surface-texture etching study exhibited good morphologies when the films were deposited at $200-300^{\circ}C$. On the basis of these optimizations, we could find the deposition region that produces highly transparent and conductive properties including efficient light scattering capability.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.3
• /
• pp.133-141
• /
• 1998

Stainless is widely used for various purposes due to its good corrosion resistance. There has been much research to produce the color stainless steel by several methods. In this experiment, TixN films have been deposited on the SUS304 substrate by the DC magnetron sputtering system and the color and texture of the films as a function of coating conditions has been studies. The TixN films showed a (111) preferred orintation in bias-free conditions. The texture of coated later was changed from (111) to (200) to (2200 with a change of the bias from -1000V to -3000V. When the bias is low, coated elements have low energy. Therefore, the texturct (111) of low surface energy. The mobility of atoms was increased with the increase of the blas and texture was changed to the other plane. Non-etched specimens all exhibited strong (111) texture. This result shows that (111) is a loose plane and of non-etched specimens all exhibited. High growing velocity of (111) of especially was main texture of Non-etched specimens. Low working pressure($4\times10^{-3}$torr) was more effective than figh working pressure ($6\times10^{-3}$torr) for the gold color of $Ti_xN$ film. L and b were increased and a was decreased with the increase of bias voltage. Accordingly, We obtained the near gold color of $Ti_xN$ film(L;92, a;1~1.5 b:24~29.50. As a result of reflectance. And as the bias increased, the reflectance was proportional to the increasing bias voltage, but we took the top reflectance when the bias voltage was -200V.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.1
• /
• pp.78-88
• /
• 2009

The mechanical characteristics (texture and color) and consumer preference of Doraji Yanggengs using different pre-treatments and added levels of Doraji were presently evaluated. Three kinds of Doraji Yanggengs were made with differing amounts of Doraji powder (DPY; 30, 50, or 70 g), ground raw Doraji (GRDY; 100, 200, or 300 g), and Doraji juice (DJY; 100, 200, or 300 g). Texture characteristics (hardness, adhesiveness, springiness, chewiness, gumminess, cohesiveness) and color values (lightness, redness, yellowness) were measured three times in three experiments conducted with each formulation. Preference was measured with a nine-point hedonic scale for Yanggengs once every three experiments. Consumer preference was measured with color, flavor, taste, appearance, texture, and overall acceptability. Significant differences according to the amount of Doraji powder were evident with DPY for hardness (p<0.001), adhesiveness (p<0.05), and cohesiveness (p<0.001). Hardness (p<0.001), adhesiveness (p<0.001), chewiness (p<0.01), and gumminess (p<0.01) of 100 g GRDY displayed higher scores than 200 g and 300 g GRDY, but displayed significantly lower scores in cohesiveness (p<0.01). Hardness (p<0.001), adhesiveness (p<0.001), chewiness (p<0.001), gumminess (p<0.01), and cohesiveness (p<0.05) of DJY showed significant differences according to amount of Doraji juice. The highest score in a preference test among DPYs was evident for 30 g DPY. There were no significant differences in preference among GRDYs and DJYs. Color, flavor, taste, appearance, texture, and overall acceptability were significantly (p<0.01) correlated in all Yanggengs. DJY was preferred more than DPY and GRDY. Women in their forties and fifties preferred Yanggeng more when compared to women in their twenties and thirties.

• Transactions of Materials Processing
• /
• v.26 no.3
• /
• pp.150-155
• /
• 2017

To obtain the Goss texture, {110}<001>, IF steel sheets were asymmetrically rolled by 50-89% reduction in the thickness at room temperature and subsequently annealed at 200, 900, and $1200^{\circ}C$ in a box furnace under air atmosphere. The asymmetrically rolled specimens and annealed specimens show well-developed Goss texture, {110}<001>. After the IF steel sheets were asymmetrically rolled at room temperature and subsequently annealed at $900^{\circ}C$ for 1 h in a box furnace under air atmosphere, the intensity of the Goss texture, {110}<001> was high in the IF steel sheets.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.7-12
• /
• 2002

반도체 공정에서 구리(Cu) 배선의 미세구조와 신뢰성에 대해 연구하였는데, 특히 CVD Cu와 전기도금 Cu를 사용하여 신뢰성에 대한 texture와 결정 구조의 영향을 연구하였다 CVD Cu의 경우 여러 가지 시드층(seed layer)을 사용함으로서, 결정입자의 크기는 비슷하지만 texture가 전혀 다른 Cu 박막을 얻을 수 있었는데, 신뢰성 검사결과 (111) texture를 가진 Cu 배선의 수명이 (200) texture를 가진 Cu 배선의 수명보다 약 4배 가량 길게 나왔다. 전기도금 Cu 박막의 경우 항상 (111) texture를 갖고 있었으며 결정립의 크기도 CVD Cu의 것보다 더 컸다. Damascene 공법으로 회로 형성한 Cu 배선의 경우에도 전기도금 Cu의 결정립 크기가 CVD Cu의 것보다 더 크게 나타났으며, 신뢰성 검사결과 배선의 수명도 더 길게 나타났는데 그 차이는 0.4 $\mu\textrm{m}$ 이하의 미세선폭 영역에서 더욱 현저했다. 따라서 전기도금 Cu가 CVD Cu보다 신뢰성 측면에서 더 우수한 것으로 판명되었다.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.127-134
• /
• 1998

Stainless steel is being used widely for various purposes due to its good corrosion resistance. There has been much research to produce a colored and corrosion-resistant stainless steel by several methods to use in decorating. In this experiment, we coated TiN(C,O,H)films on the SUS304 substrates with the DC magnetron sputtering system and then studied the texture and color of the films as a function of additional gases being inserted into the system. A (220) texture of TixN film changed to (200) by the addition of either hydrogen or the acetylene and changed further to (111) with an increase of the additional acetylene content. The addition of oxygen gas changed from the texture(220) to (111) to (200). The color of the TixN film changed from gold to gray to green with the increase of the content by the addition of oxygen gas, while it changed to pink and finally to gray with the increased of the content by the addition of acetylene gas. Reflectance increased in the region of short wavelength by the addition of hydrogen, but decreased with the increase of the oxygen and the acetylene content.

• Korean Journal of Metals and Materials
• /
• v.47 no.10
• /
• pp.681-685
• /
• 2009

$CeO_2$ buffer layers have been deposited on YSZ single crystal substrates via a radio-frequency sputtering method. We focused on the texture development of $CeO_2$ with out-of-plane alignment and its effects on a superconducting YBCO layer, which was deposited by metal organic deposition. $CeO_2$ layers were grown epitaxially on single crystal YSZ substrates and subsequent YBCO layers were also grown epitaxially from $CeO_2$ layers. It was observed that the intensity of $CeO_2$(200) decreased with deposition temperature. ${\theta}-2{\theta}$ scan FWHM values of $CeO_2$(200) were inversely proportional to the peak intensities of $CeO_2$(200). The sample with the lowest $CeO_2$(200) intensity and poor out-of-plane alignment showed a strong reaction with the MOD-YBCO layer resulting in a thicker $BaCeO_3$ layer. The texture and superconducting property of the YBCO layer were affected indirectly by the formation of a $BaCeO_3$ layer at the interface between the $CeO_2$ and YBCO layers.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.44-54
• /
• 1994

Effects of cooling rate, cold reduction %, continuous annealing treatments on the recrystallization texture structure of the A1 killed extra low carbon steel sheet contaning Ti, Nb, and B were investigated. The texture coefficient ratio TC (222)/TC (200) tends to increase with decreasing the cooling rate of the coling process and increasing cold reduction %. However, the texture coefficient ratio tends to decrease as the cold reduction % increases from 80% to 90%, which may be due to the change of the primary texture structure from {554} (225) to {ill] (1 1%). The optimum fabrication procedures for the steel sheet with a maximum texture coefficient ratio may be : furnance cooling after the coiling treatment, 80% cold reduction and the continuous annealing treatment of holding at 80O0C for 1 min., water quenching and then holding at $450^{\circ}C$ for 5min.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.16-20
• /
• 2002

Bi-axially textured Ni tapes for YBCO coated conductors were Prepared by cold rolling and heat treatment of Ni Powder compacts. The Ni powder used in this study was 5 urn in particle size and 99.99 % in purity. The process of this study consists of filling of hi powder into a rubber mold, cold-isostatically Pressing and sintering of the powder compacts at 110$0^{\circ}C$ for 6h in 96 % Ar - 4 % H$_2$ atmosphere. The sintered compacts were cold rolled with a 5 % step reduction ratio into a 100 micron-thick tapes and then heat-treated at 100$0^{\circ}C$ for various time periods. The (200) texture of Ni tape was successfully developed through the recrystallization heat treatment of the cold rolled Ni tapes. At 100$0^{\circ}C$, the degree of texture of the heat-treated Ni tapes seems not to be significantly affected by the heat-treatment time. The short heat treatment of S min was sufficient to develop the complete (200) cube texture. The degree of in-Plane and out-of-plane texture of the prepared Ni tapes was 8-10$^{\circ}$. The heat treated Ni tapes consisted of equiaxed grains with a size 50-70 microns. and the AFM sol-face roughness was as smooth as 3 nm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.114-117
• /
• 2007

In the present study, the effects of initial texture on the twinning formation of AZ31 Mg rolled sheet was investigated. Uniaxial compression tests were performed on samples cut along the normal direction and rolling direction of rolled AZ31 Mg alloy sheet at various temperatures (RT, 200, 250, 300, 350, $400^{\circ}C$) with the 0.01/s strain rate. Pole figure of rolling planes showed that basal planes of most gain were located parallel to the rolling direction. After compression test, microstructures and stress-strain curves results indicated that active deformation twining occurred only at the specimen cut along the rolling direction. The slip-twin transition with the increase of temperature was also investigated.