• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.574-581
• /
• 2019

The present study analyzed the productivity and cost of winching operations for evaluating the efficiency of a tractor-attached winch in a Pinus densiflora thinning site located in the Yangyang County of Gangwon-do. The mean yarding distance and mean timber volume were 29 m and 0.15 ㎥, respectively. In the 95 cycles of yarding operations, the uphill and downhill yarding operations constituted 51% and 49%, respectively, of the total yarding operations. The productivity of the uphill yarding operation was 2.28 ㎥/h, and the productivity of the downhill yarding operation was 1.89 ㎥/h. The findings of this study revealedthat productivity would increase by 0.5 ㎥/h when the rate of utilization of the machine is increased to 80% by reducing the operational delay time. The cost of the downhill yarding operation was 44,116 KRW/㎥, whereas that of the uphill yarding operation was 53,369 KRW/㎥. The difference in cost resulted from the difference in the number of yarding stems (stems/cycle). Furthermore, the results of the multiple linear regression equation developed for predicting the yarding operation times showed that productivity was significantly affected by working conditions such as yarding distance (m), the number of stems per cycle (stems/cycle), and the terrain slope (%) in the uphill and downhill yarding operations. Further research is required for developing an accurate prediction model equation according to a yarding direction.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.125-125
• /
• 2017

최근 들어 내수용 및 수출용 자동차 보증 제도를 살펴보면 부품에 대한 방식 보증기간이 점차 연장되는 추세이며, 이에 따라 자동차사에서 요구하는 방식 및 내식성 평가 기준이 상향되어 가고 있다. 실제로 수출차에 대한 방청 품질 보증기간이 차체 구멍 발청 10년에서 12년으로 연장할 움직임을 보이는 등 점차 방식에 대한 관심이 높아지고 있다. 따라서 내식성 향상에 대한 끊임없는 연구가 지속적으로 이루어지고 있으며, 내식성 향상을 위해 구조/형상 변화, 도장 품질 향상, 최적화 설계 등 다방면에서 노력을 기울이고 있다. 그 중에서도 가장 근본적인 해결책인 소재의 내식성 향상에 대한 관심은 날로 높아지고 있는 실정이다. 특히 일본 등지에서는 GA 도금재의 사용이 증가하고 있으나, 아직은 내식성에 대한 효율적이고 체계적인 관리가 부족한 면이 있다. GA재는 합금화 과정에서 야기되는 Fe% 합금화도, 합금화 상분율(감마, 델타, 제타상), crater 등 복잡한 소재의 특성으로 인해 소재의 내식성 분석에 고려할 사항이 많다. 실제 여러 실험들을 통해서 GA재가 내식성에 영향이 있는 인자들에 대해 많은 연구가 진행되었지만 명확히 정량화되어 있지 않은 관계로 GA재의 내식성 관리 기준에 대해서도 명확하진 않은 상황이다. 본 연구에서는 당사재와 타사재의 고강도 GA재 (>440 MPa) 11종에 대해 crater분율, zeta상, 합금화도, 도금량 등의 다양한 도금 물성들을 조사하였다. 또한 이 시편들을 34일 동안의 복합염수 분무법(CCT)을 통해 얻은 최대 및 평균 블리스터 폭과 소재 표면품질 물성과의 상관관계를 통해서 부식과 연관된 관련인자들을 도출하고 정량적인 관계를 살펴보았다. GA재의 경우 다양한 물성들 중에서 도금 크레이터, 제타상, 합금화도 순으로 내식성에 영향을 주는 것으로 확인이 되었으며 이 세 인자들을 내식성 평가 지수화하여 GA재 생산시 효율적인 관리범위를 지정하는데 이용 가능할 수 있도록 diagram을 도출하였다. 따라서, 본 연구를 통하여 자동차사에서 요구하는 내식성 기준을 만족하기 위한 내식성 상관 인자들의 관리 수준을 정량화함으로써 보다 우수한 소재의 관리를 할 수 있도록 하고자 한다.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.211-215
• /
• 2006

This study was carried out to determine whether genistein implants in laying hens could be transferred into their eggs. 250 mg genistein pellet was implanted two or four subcutaneously in the neck of laying hens. The contents of genistein in egg yolk transferred were analyzed with HPLC-MS. In 500 mg genistein pellets, it was detected as 395 ng/egg yolk on the day 18 after implanting and maintained as 546 ng/egg yolk after the day 59. In 1,000 mg, genistein was detected as 240 ng/egg yolk on the day 13, as 514 ng/egg yolk on the day 30 and maintained over 59 days. In conclusion, the direct genistein implants could be more twenty times efficiently transferred to egg yolks than dietary supplement.

• KSBB Journal
• /
• v.22 no.1
• /
• pp.7-15
• /
• 2007

Extensive research was carried out for inhibition of melanin formation as development of whitening cosmetic ingredients. But degradation of melanin itself was not intensively pursued as development of cosmetics. In this study, novel melanin degradation enzyme was developed and characterized. Also this enzyme production process was optimized and formulation was tried using micro encapsulation technique.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.04a
• /
• pp.87-112
• /
• 2005

분무를 정량적으로 측정하는 것은 노즐의 설계와 개발을 위해서 뿐만 아니라 연소 시스템 전반의 효율 및 불안정성의 제거, 공해 저감 등의 요구 조건을 만족하기 위해서 중요하다. 이를 위해 이전에는 분무장 내에 수집관을 삽입하는 기계적 패터네이터(Mechanical Patternator)와 같은 삽입식 측정 방식을 이용하여 왔으나, 최근에는 고속카메라, Malvern particle analyzer, PDPA, 광학 패터네이터(Optical Patternator)와 같은 분무장을 교란시키지 않으면서도 빠른 측정이 가능한 가시화 기술들이 적용되고 있다. 특히 광학 패터네이터는 레이저 평면광을 이용하여 분무를 측정하는 비삽입식 기술로 단시간 내에 분무장 내 액체 연료의 질량 및 액적 크기의 단면 분포를 동시에 얻어낼 수 있는 장점을 갖고 있다. 그러나 분무 액적들의 수밀도가 증가하는 경우에는 이들 액적에 의한 입사광 및 신호 감쇠, 다중산란 등에 의한 오차가 심하게 발생하여, 기존의 PDPA, PLIF 등의 광학 기법으로는 충분히 신뢰할 만한 결과를 얻기가 어렵게 된다. 이러한 분무를 정량적으로 측정하기 위해서는 입사광의 감쇠뿐만 아니라 분무장 내 액적들에 의한 신호의 감쇠 과정에 대한 고려가 필요하다. 주면 액적들의 영향을 최소한으로 줄이기 위해서는 레이저 평면광을 사용하는 광학 패터네이터와 달리 레이저 광선을 분무장에 조사하여 고압에서 나타날 수 있는 다중 산란에 의한 오차를 최소화할 수 있다. 이러한 이미지 처리 기법을 이용하는 광학 선형 패터네이터(Optical Line Patternator)를 이용하여 기존 레이저 계측기법으로 측정이 곤란하였던 고압 환경 하에서의 스월 동축형 인젝터의 분무 특성을 해석할 수가 있다. 2015(년도) 6,388, 2025(년도) 13,367, 2035(년도) 18,756, 2045(년도) 22,595, 시장점유율 증가로 인한 수출액 증가분 누적(억원) : 2015(년도) 3,411, 2025(년도) 8,847, 2035(년도) 14,433, 2045(년도) 18,005 또한 시나리오 비교평가를 실시하여 본 결과, 본 연구에서 정의한 순편익 누적(Cumulative Net Profit) 변수를 적용하면 현재 연구비 추세 대비 $30\%$ 까지 연구비를 증가 시키는 것이 효율적임을 알 수 있었다.성, 생산 용이성, 제품 디자인의 우수한 정도가 a=0.01 수준 하에서 유의적으로 추정되었다. 이들 변수들 중에서 품질경쟁력에 가장 큰 영향을 미치는 측정변수는 제품의 기본 성능, 수명(내구성), 신뢰성, 제품 디자인의 순서로 추정되었다. 이것은 한국 제조업이 아직 산업 디자인이 품질경쟁력에 크게 영향을 미치는 성숙단계에 이르지 못하였음을 의미한다. (2) 제품 디자인에게 영향을 끼치는 유의적인 변수는 연구개발력, 연구개발투자 수준, 혁신활동 수준(5S, TPM, 6Sigma 운동, QC 등)이며, 제품 디자인은 우선 품질경쟁력을 높여 간접적으로 고객만족과 고객 충성을 유발하는 것으로 추정되었다. 상기의 분석결과로부터, 본 연구는 다음과 같은 정책적 함의를 도출하였다. 첫째, 신상품 개발과 혁신을 위한 포괄적인 연구개발 프로젝트를 품질 경쟁력의 주요 결정요인(제품의 기본성능, 신뢰성, 수명(내구성) 및 제품 디자인)과 연계하여 추진해야 할 것이다. 둘째, 기업은 디자인 경영 마인드 제고와 디자인 전문인력 양성을, 대학은 디자인 현장 업무를 통하여 창의력 증진과 기획 및 마케팅 능력 교육을, 정부는 디자

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.22-27
• /
• 1991

This study was designed to find out the effects of cropping patterns on the changes of soil physico-chemical properties. Soil properties and crop growth were studied under the four cropping patterns, such as rice monoculture, green garlic-rice, manure rye-rice and radish-rice. The results are summurized as followings ; 1. Soil physical properties were affected by different pre-crop cultivations and its residual effects were continued for 60-70 days after rice transplanting 2. Soil air permeabilities at harvesting time of pre-crops were high in order of manure rye>green garlic>radish, and water permeabilities during rice cultivation were similar to previous order. 3. Chemical properties of soil were affected by the different fertilizer level of pre-crops and their residual effects were continued to rice harvesting time. The ratio of nutrient uptake to $N-P_2O_5-K_2O $ based on amount of application were in the order of manure rye-rice>radish-rice>rice monoculture>green garlic-rice plot. Fertilizer application after pre-crops cultivation must be considered. 4. Rice root distribution of manure rye-rice plot was higher than that of other cropping patterns at subsoil. However, rice root distribution at green garlic-rice plot and radish-rice plot was high at topsoil which had much residual nutrient from pre-crops. 5. Rice yield after pre-crops was high in order of green garlic-rice>radish-rice> rice monoculture>manure rye-rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1594-1606
• /
• 2014

The purpose of this study was to examine safety accidents related to school foodservice, working and operating environments of school foodservice, status and awareness of safety education, educational needs, and information on qualitative improvement of school foodservice. The subjects in this study were 234 cooks in charge of cooking at elementary and secondary schools in Chungbuk. A survey was conducted from July 30 to August 8, 2012, and among 202 questionnaires gathered, 194 completed questionnaires were analyzed. Statistical analyses were performed on data utilizing the SPSS version 19.0. The main results of this study were as follows: 44.3% of workers experienced safety accidents. The most frequent safety accident was 'once' (60.5%), and most safety accidents took place between June and August (31.4%). The time at which most safety accidents happened was between 8 and 11 am. Most safety accidents happened during cooking (52.3%) and while using a soup pot or frying pot (52.4%). The most common accidents were 'burns', 'wrist and arm pain', and 'slips and falls'. Respondents who experienced safety accidents replied that 57.6% of employees dealt with injuries at their own expense, and only 35.3% utilized industrial accident insurance. In terms of the operating environment, the score for 'offering information and application' was highest (3.76 points), whereas that for 'security of budget' was lowest (1.77 points). As for accident education, employees received safety education approximately 3.45 times and 5.10 hours per year. Improving the working environment of school foodservice cooks requires administrative and financial support. Furthermore, educational materials and guidelines based on the working environment and safety accident status of school foodservice cooks are required in order to minimize potential risk factors and control safety accidents in school foodservice.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.2
• /
• pp.85-92
• /
• 2002

This study was conducted to investigate the effects of application levels of swine waste and chemical fertilizer on productivity of corn and nitrogen and phosphorus leaching in Lysimeter containing sandy loam soil. Main Plots were consisted of two types of swine waste, such as swine slurry(SS) and compost of swine manure fermented with sawdust(CSMFS), and chemical fertilizer(CF) and the subplots were consisted of application levels of N-fertilezer, such as 100kgN/ha, 200kgN/ha and 400kgN/ha. Lysimeters were constructed with 1m depth, 30cm diameter. The results obtained were summarized as follows ; 1. Dry matter(DM) yield of com enhanced as increased application levels of SS, CSMFS and CF. DM yield reveals that there is an increase in order CS > SS > CSMFS. 2. Nitrogen contents of the whole corn enhanced as increased application levels of SS, CSMFS and CF. Nitrogen content reveals that there is an increase in order CS > SS > CSMFS. 3. $NO_3^{-}$ and P contents in the leaching water increased as increased application levels of SS, CSMFS and CF. $NO_3^{-}$ content was highly elevated in the concentrated rainy season in the experimental early stage. However, P content was affected with the rainfall. The maximum $NO_3^{-}$ and P contents in the leaching water were 14.8ppm and 0.26ppm, respectively.ively.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.7-14
• /
• 2013

This study investigated the optimum condition of abrasion peeling machine and pellicle peeling ability of chestnut (Castanea spp.) varieties for the efficient production of peeled chestnuts. The optimum conditions were 50 minutes peeling time and 27 rpm of drum rotation speed and chestnut pellicle peeling ratio was 89.3%. Among 8 Korean chestnut varieties which were peeled under the optimum condition (27 rpm/50 min), 'Tsukuba (89.3%)', 'Tanzawa (72.2%)' and 'Ishizuchi (70.9%)' showed the highest ratio of pellicle peeling ratio. 'Tsukuba' had the most excellent peeled (grade I) chestnuts (77.3%), followed by 'Ishizuchi (46.7%)', and 'Tanzawa (45.0%)'. Regarding the chestnuts quality for commercialization, 'Tsukuba' had the most excellent peeled chestnuts (90.5%), followed by 'Tanzawa (74.8%)', and 'Ishizuchi (74.3%)'. 'Mipung (37.2%)' had the most broken and injured chestnuts and 'Tsukuba (5.9%)' had the least broken and injured chestnuts. Therefore this study concluded that 'Tsukuba' was the superior variety for producing high value-added processed chestnuts.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.5-13
• /
• 2022

The current environmental problem is that environmental pollution is accelerating due to the generation of large amounts of waste and indiscriminate consumption of energy. Fossil fuels, a representative energy production fuel, are burned in the process of producing energy, generating a large amount of greenhouse gases and eventually causing climate change. In addition, the amount of waste generated worldwide is continuously increasing, and environmental pollution is occurring in the process of waste treatment. One of the methods for simultaneously solving these problems is the energy recovery from and reduction of organic wastes. Sewage sludge generated in sewage treatment plants has been treated in various ways since ocean disposal was completely prohibited, but the amount generated has been continuously increasing. Since the sewage sludge contains a large amount of organic materials, it is desirable to recover energy from the sewage sludge and reduce the final discharged waste through anaerobic digestion. However, most of the excess sludge is a mass of microorganisms used in sewage treatment, and in order for the excess sludge to be anaerobically digested, the cell walls of the microorganisms must be destroyed first, but it takes a lot of time to destroy the cell walls, so high rates of biogas production and waste reduction cannot be achieved only by anaerobic digestion. Therefore, the pre-treatment process of solubilizing excess sludge is required, and the thermal solubilization process is verified to be the most efficient among various solubilization methods, and high rates of biogas production and waste reduction can be achieved by anaerobic digestion after destroying cell walls the thermal solubilization process. In this study, when pretreating TS 10% thickened excess sludge through a thermal solubilization system, a study was conducted on solubilization characteristics according to retention time and operating temperature variables. The experimental variables for the retention time of the thermal solubilization system were 30 minutes, 60 minutes, 90 minutes, and 120 minutes, respectively, while the operating temperature was fixed at 160℃. The soulbilization rates calculated through TCOD and SCOD derived from the experimental results increased in the order of 12.11%, 20.52%, 28.62%, and 31.40%, respectively. And the variables according to operating temperature were 120℃, 140℃, 160℃, 180℃, and 200℃, respectively, while the operating retention time was fixed at 60 minutes. And the solubilization rates increased in the order of 7.14%, 14.52%, 20.52%, 40.72%, and 57.85%, respectively. In addition, TS, VS, T-N, T-P, NH₄⁺-N, and VFAs were analyzed to evaluate thermal solubilization characteristics of thickened excess sludge. As a result, in order to obtain 30% or more solubilization rate through thermal solubilization of TS 10% thickened excess sludge, 120 minutes of retention time is required when the operating temperature is fixed to 160℃, and 170℃ or more of operating temperature is needed when the operating time is fixed to 60 minutes.