This paper has presented research results for the switching mode class E frequency multiplier that has simple circuit structure and high efficiency. Frequency multiplication is coming from the nonlinearity of the active component, and this paper models the FET active component as a simple switch and some parasitics to analyze the characteristics. The matching component parameters for the class E frequency doubler have been derived with modeling the FET as a input controlled switch and some parasitics. A circuit simulator, ADS, is used to simulate the output voltage and current waveform and efficiency with the variation of the parasitic values. With 2.9GHz input and 2V bias, the drain efficiency has been decreased from 98% to 28% with changing the parasitic capacitance from 0pF to 1pF at 5.8GHz output, which shows that the parasitic capacitance CP has the most significant effect on the efficiency among the parasitics of FET.
The Journal of Korean Institute of Communications and Information Sciences
/
v.28
no.1C
/
pp.81-89
/
2003
For improving the performance of noise suppression in tactical communication environments, an enhanced MELP vocoder is suggested, in which an acoustic noise suppressor is integrated into the front end of the MELP algorithm, and an FEC code into the channel side of the MELP algorithm. The acoustic noise suppressor is the modified IS-127 EVRC noise suppressor which is adapted for the MELP vocoder. As for FEC, the turbo code, which consists of rate-113 encoding and BCJR-MAP decoding algorithm, is utilized. In acoustic noise environments, the lower the SNR becomes, the more the effects of noise suppression is increased. Moreover, The suggested system has greater noise suppression effects in stationary noise than in non-stationary noise, and shows its superiority by 0.24 in MOS test to the original MELP vocoder. When the interleave size is one MELP frame, BER 10-6 is accomplished at channel bit SNR 4.2 ㏈. The iteration of decoding at 3 times is suboptimal in its complexity vs. performance. Synthetic quality is realized as more than MOS 2.5 at channel bit SNR 2 ㏈ in subjective voice quality test, when the interleave size is one MELP frame and the iteration of decoding is more than 3 times.
Journal of the Institute of Electronics Engineers of Korea SC
/
v.46
no.6
/
pp.65-72
/
2009
This paper presents a vision based localization method for indoor mobile robots using the types of vertices from a monocular image. In the images captured from a camera of a robot, the types of vertices are determined by searching vertical edges and their branch edges with a geometric constraints. For obtaining correspondence between the comers of a 2-D map and the vertex of images, the type of vertices and geometrical constraints induced from a geometric analysis. The vertices are matched with the comers by a heuristic method using the type and position of the vertices and the comers. With the matched pairs, nonlinear equations derived from the perspective and rigid transformations are produced. The pose of the robot is computed by solving the equations using a least-squares optimization technique. Experimental results show that the proposed localization method is effective and applicable to the localization of indoor environments.
The Transactions of the Korea Information Processing Society
/
v.5
no.8
/
pp.2061-2074
/
1998
In pattern recognition and image analysis upplications, a graph is a useful tool for complex obect representation and recognition. However it takes much time to pair proper nodes between the prototype graph and an input data graph. Futhermore it is difficult to decide whether the two graphs in a class are the same hecause real images are degradd in general by noise and other distortions. In this paper we propose a matching algorithm using a matrix. The matrix is suiable for simple and easily understood representation and enables the ordering and matching process to be convenient due to its predefined matrix manipulation. The nodes which constitute a gaph are ordered in the matrix by their geometrical positions and this makes it possible to save much comparison time for finding proper node pairs. for the classification, we defined a distance measure thatreflects the symbo's structural aspect that is the sum of the mode distance and the relation distance; the fornet is from the parameters describing the node shapes, the latter from the relations with othes node in the matrix. We also introduced a subdivision operation to compensate node merging which is mainly due t the prepreocessing error. The proposed method is applied to the recognition of musteal symbols and the result is given. The result shows that almost all, except heavily degraded symbols are recognized, and the recognition rate is approximately 95 percent.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.30
no.2
/
pp.173-176
/
2019
In this study, a Ka-band waveguide rotary joint that can be applied to a millimeter-wave seeker is designed and fabricated. The proposed rotary joint maintains a low standing-wave ratio and low-loss characteristics, and has two rotary axes designed to enable azimuth and elevation rotation. The rotary joint is designed as a ridge-waveguide-type mode converter and a ${\lambda}/4$ choke structure to match the electromagnetic wave propagation mode between the spherical and circular waveguides. A performance test using a network analyzer and a high-power transmitter to assess vibration and shock were conducted. Results showed that the rotary joint had a very low standing-wave ratio of less than the maximum of 1.19:1 and an insertion loss of less than 0.80 dB at $F_C{\pm}500MHz$.
Journal of the Korea Institute of Information Security & Cryptology
/
v.17
no.2
/
pp.29-40
/
2007
The purpose of this research is to propose a method for scoring the quality of a fingerprint image using the local information derived from the fingerprint image. In previous works for the quality measuring, most of the quality scores are related to the performance of a matching algorithm, and this makes the quality result more subjective. The quality score of a fingerprint image proposed in this work is sensor-independent, source-independent and matcher-independent one, and this concept of fingerprint sample quality results in effective improvement of the system performance. In this research, a new definition of fingerprint image quality and a new method for measuring the quality are proposed. For the experiments, several sub-databases from FVCs are used and the proposed method showed reasonable results for the test database. The proposed method can be used in various systems for the numerous purposes since the quality scores generated by the proposed method are based on the idea that the quality of fingerprint should be sensor-independent, source-independent and matcher-independent.
Proceedings of the Korea Water Resources Association Conference
/
2022.05a
/
pp.88-88
/
2022
하천법 개정 및 수자원의 조사·계획 및 관리에 관한 법률 제정으로 하상변동조사를 정기적으로 실시하는 것이 의무화 되었고, 지자체가 계획적으로 수자원을 관리할 수 있도록 제도가 마련되고 있다. 하상의 지형측량은 직접 측량할 수 없기 때문에 수심 측량을 통해 간접적으로 이루어지고 있으며, 그 방법은 레벨측량이나 음향측심기를 활용한 접촉식으로 이루어지고 있다. 접촉식 수심측량법은 자료수집이 제한적이기 때문에 공간해상도가 낮고 연속적인 측량이 불가능하다는 한계가 있어 최근에는 LiDAR나 초분광영상을 이용한 원격탐사를 이용한 수심측정 기술이 개발되고있다. 개발된 초분광영상을 이용한 수심측정 기술은 접촉식 조사보다 넓은 지역을 조사할 수 있고, 잦은 빈도로 자료취득이 용이한 드론에 경량 초분광센서를 탑재하여 초분광영상을 취득하고, 최적 밴드비 탐색 알고리즘을 적용해 수심맵 산정이 가능하다. 기존의 초분광 원격탐사 기법은 드론의 경로비행으로 획득한 초분광영상을 면단위의 영상으로 정합한 후 특정 물리량에 대한 분석이 수행되었으며, 수심측정의 경우 모래하천을 대상으로 한 연구가 주를 이루었으며, 하상재료에 대한 평가는 이루어지지 않았었다. 본 연구에서는 기존의 초분광영상을 활용한 수심산정 기법을 식생이 있는 하천에 적용하고, 동일지역에서 식생을 제거한 후의 2가지 케이스에 대해서 시공간(Spatio-temporal)초분광영상과 단면초분광영상에 모두 적용해 보았다. 연구결과, 식생이 없는 경우의 수심산정이 더 높은 정확도를 보였으며, 식생이 있는 경우에는 식생의 높이를 바닥으로 인식한 수심이 산정되었다. 또한, 기존의 단면초분광영상을 이용한 수심산정뿐만 아니라 시공간 초분광영상에서도 수심산정의 높은 정확도를 보여 시공간 초분광영상을 활용한 하상변동(수심변동) 추적의 가능성을 확인하였다.
Lee, Jun Hyeong;Yoon, Byung Man;Kim, Seo Jun;Lee, Yun Ho
Proceedings of the Korea Water Resources Association Conference
/
2022.05a
/
pp.16-16
/
2022
영상유속계는 영상을 이용한 비접촉식 유속계로 하천과 같은 넓은 범위의 유속 및 유량을 간편하게 측정할 수 있다는 장점이 있어 현재 국내외에서 영상유속계의 실용화 연구가 수행되고 있다. 특히 유속 및 유량을 측정하기 위해 카메라 외에 별도의 측정 장비가 필요없기 때문에 드론에 장착하여 표면유속을 측정하는 연구 또한 활발히 이루어지고 있다. 기존 드론 영상을 이용한 표면유속 측정 연구에서는 드론을 측정하고자 하는 하천 영역 위에서 정지하여 영상을 촬영하여 표면유속을 측정하고 있다. 이때 한 화면에 하폭이 다 담기지 않는 넓은 하천의 경우 촬영 위치를 옮겨서 다시 영상을 촬영하거나 하폭이 담길 때까지 비행 고도를 높여 촬영하고 있다. 하지만 촬영 위치를 옮겨 촬영하는 방식의 경우 넓은 하천을 다 담기 위해 여러 번의 촬영을 하고 이를 정합하는 과정이 필요하다는 단점이 있으며 비행 고도를 높여 촬영하는 방식의 경우 촬영 품질 저하로 인해 측정한 유속의 불확도가 크게 산정된다는 단점이 있다. 이에 본 연구에서는 드론을 이동하며 촬영한 연속적인 영상을 이용하여 하천의 표면유속을 측정하는 방법에 대한 연구를 수행하였다. 하천을 가로질러 비행하며 촬영한 드론 이동영상을 활용하면 폭이 넓은 하천의 경우도 간편하게 유속 분포를 측정할 수 있다. 이동영상을 이용하여 유속을 측정하기 위해서는 연속된 이동영상 내에서 지표면의 공통된 특징점을 찾아 흔들림 보정 알고리즘을 적용하여 유속을 산정하는 방법과 드론의 이동 속도를 이용하여 영상의 수표면 이동속도와 벡터연산을 적용하는 두가지 방법을 사용할 수 있다. 이 두가지 방법 중 영상 분석에 필요한 전처리 과정이 적고 지표면의 고정점이 필요 없는 드론의 이동속도를 이용한 벡터 연산을 적용하는 방법을 실제 흐름에 적용하였다. 측정한 수표면의 유속을 전자파표면유속계로 측정한 유속과 비교한 결과 평균 5 % 이내의 차이를 보이는 것을 확인하였다. 향후 다양한 흐름 조건과 드론의 비행속도를 변경하여 측정하는 등의 유속 측정 적용성을 검토하는 연구가 수행된다면 하폭이 넓은 하천 등 다양한 조건에서 드론 영상을 이용한 유속 측정이 가능할 것으로 기대한다.
The Potosinian geological basement in central Mexico is comprised of the Upper Paleozoic metamorphic rocks, which crop out on the Sierra de Catorce nucleus located in the northeastern part of the state. The sedimentary sequence that covers unconformably the Paelozoic basement is represented by an Upper Triassic marine sedimentary sequence, correlating to the Zacatecas Formation and the Upper Triassic continental Huizachal Formation red beds, which in turn are covered either by La Joja Formation Jurassic red beds or by Upper Jurassic marine sediments. This sequence is overlain by the conformable Cretaceous calcareous marine sedimentary rocks in all the state of San Luis Potosi. The Cenozoic sequence unconformably covers some of the aforementioned rocks and is represented by undifferentiated volcanic rocks as well as by marine clastic rocks. The existing intrusive igneous rocks are felsic to intermediate composition, and they intrude the metamorphic basement and sedimentary rocks. Conglomerates with evaporitic sediments were deposited during the Pleistocene. The Quaternary sequence includes basalt flows, piedmont deposits, alluvium, and occasionally evaporites and caliche layers. In the state of San Luis Potosi, a great diversity of mineral deposit types is known as both metallic and nonmetallic. The host rocks of these deposits vary from one another including formations that represent from Paleozoic up to Tertiary. The mineralization age corresponds approximately to Tertiary (75%), and is mainly epigenetic. Conclusively, the data on geology and mineralization in San Luis Potosi, Mexico are helpful to predict a hidden ore body and select promising mineralized zone(s) when the domestic company makes inroads in the mining sector of Mexico.
Park, Jae-Young;Yi, Wook-Yeol;Hyung, Yong-Woo;Nam, Seok-Woo;Lee, Hyeon-Deok;Song, Chang-Lyong;Kang, Ho-Kyu;Roh, Yong-Han
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2004.11a
/
pp.247-251
/
2004
반도체 소자의 제조에 있어 실리콘 표면에 성장한 자연산화막을 제거하기 위해 일반적으로 습식 세정 기술이 이용되어 왔다. 하지만 소자의 최소 선폭(design rule)이 nano급으로 고집적화 됨에 따라 contact hole 바닥의 자연산화막을 깨끗이 제거하는데 있어서 그 한계를 나타나고 있다. 이에 대한 효과적인 대안 공정으로 가스 건식 세정 기술이 연구되고 있다. 본 논문에서는 한 번에 50매 이상의 웨이퍼를 처리함으로써 생산성 측면에서 월등한 배치식 설비에서 원거리 플라즈마(remote plasma) 장치에서 2.450Hz의 마이크로웨이브(${\mu}$-wave)에 의해 형성시킨 수소라디칼과 $NF_3$ 가스를 이용하여 실리콘에 결함을 주지 않고 자연산화막을 선택적으로 제거하는 공정에 대해 고찰하였다. AFM을 이용한 표면분석, TEM을 이용한 물성분석, 그리고 ToF-SIMS 및 XPS를 이용한 화학 분석을 습식 및 건식 세정을 비교 평가한 결과, 건식 세정 공정이 실리콘 표면에 결함을 주지 않고 자연산화막을 제거 할 수 있음을 확인하였다. 산화막$(SiO_2)$, 질화막$(Si_3N_4)$, 그리고 다결정 실리콘(Poly-Si) 등의 각 막질별 식각 특성을 고찰하였으며, $NH_3$의 캐리어 가스인 $N_2$의 주입량을 조절함으로써 수소라디칼 형성 효율의 개선이 가능하였으며, 이로부터 게이트와 소스/드레인 사이를 절연하기 위해 이용되는 질화막의 식각 선택비를 2배 정도 개선할 수 있었다. nano급 소자에 실장하여 평가한 결과에서 불산(HF)에 의한 습식 세정 방식에 비하여 약 $20{\sim}50%$ 정도의 contact 저항 감소 효과가 있음이 확인되었다.두 소자 모두 $40mA/cm^2$ 에서 이상적인 화이트 발란스와 같은(0.33,0.33)의 색좌표를 보였다.epsilon}_0=1345$의 빼어난 압전 및 유전특성과 $330^{\circ}C$의 높은 $T_c$를 보였고 그 조성의 vibration velocity는 약4.5 m/s로 나타났다.한 관심이 높아지고 있다. 그러나 고 자장 영상에서의 rf field 에 의한 SAR 증가는 중요한 제한 요소로 부각되고 있다. 나선주사영상은 SAR 문제가 근원적으로 발생하지 않고, EPI에 비하여 하드웨어 요구 조건이 낮아 고 자장에서의 고속영상방법으로 적합하다. 본 논문에서는 고차 shimming 을 통하여 불균일도를 개선하고, single shot 과 interleaving 을 적용한 multi-shot 나선주사영상 기법으로 $100{\times}100$에서 $256{\times}256$의 고해상도 영상을 얻어 고 자장에서 초고속영상기법으로 다양한 적용 가능성을 보였다. 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.