• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.3
• /
• pp.209-213
• /
• 2001

Objective : To evaluate factor XII deficiency in patients with recurrent spontaneous abortion and its relation to aPTT. Material and Method: Factor XII was analyzed by clotting method. Results: Of 70 patients with recurrent spontaneous abortion, there were 35 cases of factor XII deficiency. Among them, there were only 3 cases of prolonged aPTT. Conclusions: It is still unclear whether factor XII deficiency is related to recurrent spontaneous abortion. Molecular approaches should be used to understand further the causal relationship. But based on this result, in the workup of patients with recurrent spontaneous abortion, factor XII should be included. aPTT is not likely to represent the abnormality of factor XII.

• Journal of Yeungnam Medical Science
• /
• v.21 no.2
• /
• pp.231-236
• /
• 2004

A congenital factor VII deficiency is a rare disorder with an estimated incidence in the western contries of one in 500,000. Because factor VII is important in initiation the coagulation cascade, a factor VII deficiency can result in significant bleeding with prolongation of the prothrombin time. We present a case of a factor VII deficiency with a subdural hematoma in an 18-year-old boy whose plasma activity of factor VII was ${\leq}10%$. Previously, he did not have any symptoms, such as hemarthrosis, easy bruising or bleeding after a minor trauma. He was administered fresh frozen plasma and a trephination was performed. His sister also had 51% lower level of factor VII.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.932-936
• /
• 2002

This paper has been studied a calibration techniques in CISPR A for 1 m monopole antenna factor in the frequency range below 30 MHz. The equivalent capacitance substitution method uses a dummy antenna in place of the actual rod element. Dummy antenna measure frequency from 150 kHz to 30 MHz and good results factor from 150 kHz to 25 MHz compare to using 1 m monopole antenna factor. It will be use to substitute dummy antenna factor for 1 m monopole antenna factor.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.157-165
• /
• 2007

Typical meteorological data is fundamental to computer simulation introduced for environment-friendly architecture designs. Therefore, in order to improve accuracy of computer simulation, typical meteorological data should be established. By examining how to choose typical meteorological data, this study selected the optimized weight factor for TRY where weighting factor was not clearly set. As a result, the same weighting factor was applied to each climatic element and TRY data where the weight factor was applied could have the distribution very similar to measurement data. The weighting factor is considered to reflect geographical characteristics of Seoul and applied climatic elements.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.84-93
• /
• 2012

The study was conducted to analyze the spatio-temporal changes in water quality of the major 36 sampling stations of Nakdong River, depending on each station, season using the 17 water quality variables from 2000 to 2010. The result was verified to interpret the characteristics of water quality variables in a more accurate manners. According to the Principal component analysis (PCA) and Exploratory factor analysis (EFA) results; the results of these analyses were identified 4 factors, Factor 1 (nutrients) included the concentrations of T-N, T-P, $NO_{3}-N$, $PO_{4}-P$, DTN, DTP for sampling station and season, Factor 2 (organic pollutants) included the concentrations of BOD, COD, Chl-a, Factor 3 (microbes) included the concentrations of F.Coli, T.Coli, and Factor 4 (others) included the concentrations of pH, DO. The results of a Cluster analysis indicated that Geumhogang 6 was the most contaminated site, while tributaries and most of the down stream sites of Nakdong River were mainly affected by each nutrients (Factor 1) and organic pollutants (Factor 2). The verification consequence of Confirmatory factor analysis (CFA) from Exploratory factor analysis (EFA) result can be summarized as follows: we could find additional relations between variables besides the structure from EFA, which we obtained through the second-order final modeling adopted in CFA. Nutrients had the biggest impact on water pollution for each sampling station and season. In particular, It was analyzed that P-series pollutant should be controlled during spring and winter and N-series pollutant should be controlled during summer and fall.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.838-849
• /
• 2017

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the $K_e$ analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, $S_n$ to over-match degree of yield strength, $M_F$. For the effect of over-match on $K_n{\times}K_{\nu}$, dispersion of the $K_n{\times}K_{\nu}$ analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, $S_{p-lt}$ by $M_F$. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous $K_e$ factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous $K_e$ factor equations.

• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.327-335
• /
• 2020

The purpose of this study was to analyze the load distribution and contact safety factor for the power take off (PTO) gear of a 71 kW class agricultural tractor. In this study, a simulation model of the PTO gear-train was developed using Romax DESGINER. The face load factor and contact safety factor were calculated using ISO 6336:2006. The simulation time was set at 2,736 hours considering the lifetime of the tractor, and the simulation was performed for each PTO gear stage at the engine rated power conditions. As a result of the simulation, the face load factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.644, 1.632, and 1.341, respectively. The contact safety factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.185, 1.216, and 1.458, respectively. As the PTO gear stage was increased, the face load factor decreased, and the contact safety factor increased. The load distributions for all the PTO gears were concentrated to the right of the tooth width. This causes stress concentrations and shortens the lifespan of the gears. Therefore, it is necessary to improve the face load factor and the contact safety factor with macro-geometry and micro-geometry.

• Clinical and Experimental Reproductive Medicine
• /
• v.12 no.1
• /
• pp.47-70
• /
• 1985

This study was presented of the 1,872 cases of infertile couples who visited and examined at the sterility clinic of Department of Obstetrics & Gynecology, Seoul National University Hospital from Sept., 1980 to Dec., 1983. Age, duration of infertility, past medical history, and other general factors were analyzed, and the factors responsible for infertility were classified and discussed. Mode of treatment, outcome of pregnancy, pregnancy rate responsible for each factor were also presented. The results were as follows: 1) The infertility was primary in 1,128, or 60.3% and secondary in 744, or 39.7%. 2) The age between 26 and 30 years of age comprised about one half of the total patients. 3) The duration of infertility between 1 and 4 years comprised about three quarters of the total patients, and the mean duration was 3.8 years. 4) The most common medical history in primary infertility was tuberculous disease, and that in secondary infertility was history of previous laparotomy. 5) About two thirds of antecedent pregnancies were abortion. 6) The major etiologic factor of infertility were male factor in 12.3%, tubal factor in 38.8%, ovulatory failure in 25.4%, uterine factor in 8.8%, cervical factor in 5.2%, peritoneal factor in 9.5%, and no demonstrable cause in 11.3%. 7) The types of male factor were azoospermia in 61.6%, oligospermia in 25.8%, low motility in 11.6%, and other abnormality in 1.0%. 8) The types of ovulatory failure were ovarian failure in 7.4%, hypothalamo-pituitary failure in 8.1 %, hypothalamo-pituitary dysfunction (including Polycystic ovarian syndrome) in 30.2%, and hyperprolactinemia in 22.4%. 9) The types of uterine factor were endometrial tuberculosis in 27.5%, uterine synechia in 33.8%, uterine anomaly in 19.7%, myoma and polyp in 9.1 %, and luteal phase defect in 9.9%. 10) The types of peritoneal factor were pelvic adhesion in 80.9% and endometriosis in 19.6%. 11) Surgeries were done in 408 patients, and they were salpingolysis, lysis of extraadnexal adhesion, salpingostomy, fimbrioplasty, ovarian wedge resection for polycystic ovarian disease, tubo-tubal anastomosis, and tubo-uterine implantation in orders. 12) 243 pregnancies were achieved during the infertility work-up, of which livebirth was 46.5%, ectopic pregnancy was 7.4%, spontaneous abortion was 7.8%, and on-going pregnancy or lost to follow-up was 36.2%. 13) Pregnancy rates in various factors were male factor in 18.7%, ovulatory factor in 31.7%, tubal factor in 24.2%, uterine factor in 34.6%, cervical factor in 19.0%, peritoneal factor in 29.0%, combined factors in 10.5%, and unexplained infertility in 37.1%. Pregnancy rate in whole patients was 25.2%.

• BMB Reports
• /
• v.29 no.6
• /
• pp.549-554
• /
• 1996

Phosphoinositide turnover in response to platelet-derived growth factor, epidermal growth factor, and bradykinin was evaluated in NIH 3T3 cells. Platelet-derived growth factor and bradykinin induced a significant increase in incorporation of $^{32}P$ into phosphatidylinositol (PI), phosphatidylinositol 4-monophosphate (PIP), and phosphatidylinositol 4.5-bisphosphate ($PIP_2$) in serum-starved NIH 3T3 cells. However, epidermal growth factor increased incorporation of $^{32}P$ into these phosphoinositides by only a small amount. Stimulation with platelet-derived growth factor, not bradykinin, caused a rapid elevation of PI and PIP kinase activities that were maximally activated within 10 min. The maximal levels of their elevation in cells with plateletderived growth factor stimulation were 3.2-fold for PI kinase, and 2.1-fold for PIP kinase. Short term pretreatment of NIH 3T3 cells with phorbol 12-myristate 13-acetate, activator of protein kinase C. caused an approximately 60% decrease in platelet-derived growth factor-induced PI kinase activities, indicating the feedback regulation of phosphoinositide turnover by protein kinase C. These results suggest that although the enhancement of phosphoinositide turnover is a rapidly occurring response in platelet-derived growth factor- or bradykinin-stimulated NIH 3T3 cells, phosphoinositide kinases may be associated with initial signal transduction pathway relevant to platelet-derived growth factor but not to bradykinin.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.1
• /
• pp.53-60
• /
• 2010

Purpose: We try to calculate EDW-factor easily with the formula applies essential data of EDW-factor and evaluate the validity through a measurement. Materials and Methods: We used the given value of GSTT (Golden Segmented Treatment Table) for the calculation of the EDW-factor. As to the experimental device, 0.6 cc farmer-type ion-chamber, an electrometer and water- phantom were used. A measurement was made at the maximum dose depth of the photon beam energy 6 MV and 15 MV under the condition that SSD (Source to Surface Distance) was 100 cm. The angle of the EDW (Enhanced Dynamic Wedge) which we use in an experiment was 60 degree, 30 degree, 20 degree in the Y1-OUT direction. We used Eclipse planning system (Varian, USA) as RTP system and the EDW-factor was calculated about all fields and EDW direction. In order to show the EDW-factor feature, a measurement was made at the selected field that verify the influence of the dependability about X, Y jaw and off-axis field. Results: When we change the Y1 field, it influence on the EDW-Factor and measured value. But the error between measured values and calculated values was less than 1%. The experimental result indicated the tendency that the error of the result of calculation and measured value becomes smaller as the EDW angle become smaller whether the calculation point (measurement point) and iso-center are same or not. The influence of the field size and energy did not show up. We simulated with the same condition using the RTP system. And we found that it makes no difference between the MU which is calculated manually by applying the EDW-Factor obtained from the commercial program and the value which is calculated by using RTP system. Conclusion: We excluded fitting value from well-known EDW-Factor formula and calculated EDW-factor with the formula applies essential data of EDW-factor only. As a result, there are no significant difference between the measured value and calculated value and it showed errors less than 1%. Also, we implemented the commercial program to calculate EDW-Factor conveniently without measure a factor on each field.