• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.384-388
• /
• 1997

Recently,direct rolling process has been drawing increasing interests because production cost be greatly reduced by eliminating subsequent hot rolling processes. Such a process has been characterized to prosuce thin steel strip (thickness 1~5mm) directly from molten metal and to skip over the conventional hot rolling processes. However, since there are several process parameters, which affect the quality of product,and their relationship between the parametersare very complex,it is therefore very difficult to realize the process design and the quality control. To overcome these difficulties quantitative relationship between the parameters are investigated through a numerical analysis. Form these results, it is found that solidification final point is the most important paramter which is critical to quality of the strip. Also,the multiple regression model is obtianed to determine their relationship from the solidification final point and roll separating force which can be easily estimated

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.979-984
• /
• 2008

본 연구는 실용적인 적용을 위한 기본적인 스트럿-타이 모델의 사용방법에 대해 논의한다. 스트럿- 타이 모델의 구성은 평형 조건식에 기초한 하중 경로를 그리는 것으로 시작한다. active sytems, vector active systems, 그리고 section active systems를 포함한 구조 시스템의 이해는 가능한 스트럿 -타이 모델을 위한 적절한 시스템을 선택할 수 있도록 한다. 간단한 원형 fan은 집중하중에서부터 분포하중까지 하중 경로를 표시할 수 있다. 스트럿의 강도는 인장 타이와 유효 압축 강도가 만나는 절점영역의 형태에 따라 결정된다. 스트럿의 유효 압축강도는 주로 transevers 변형률에 의해 영향을 끼치는 것으로 가정한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.983-987
• /
• 2001

This paper deals with an automated computer-aided process planning system by which designer can determine operation sequences even if they have little experience in process planning of wheel bolt products by a multi-stage former. The approach to the system is based on knowledge-based rules and a process knowledge base consisting of design rules is built. Knowledge for the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for the AutoCAD using a personal computer and are composed of two main modules. An attempt is made to link programs incorporationg a number of expert design rules to form a useful package. Results obtained using the modules enable the designer and manufacturer of wheel bolt product to be more efficient in this field.

• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.133-139
• /
• 2001

Since a great number of 2D engineering drawings are being used in industry and at the same time 3D CAD becomes popular in recent years, we need to reconstruct 3D CAD models from 2D legacy drawings. In this thesis, a combination of a feature recognition method and an expert system is suggested for the 3D solid model reconstruction. Modeling primitives of 3D CAD systems are recognized and constructed by using the pattern matching technique of the features modeling. Additional information for the 3D model reconstruction can be generated by extracting symbols or text entities which are related to form entities. For complex and indefinite cases which cannot be solved by the process of feature recognition, an expert system with a rule base has been used for decision-making. A 3D reconstruction system which recognizes 2D DXF drawing files has been implemented where models composed with protrusions, holes, and cutouts can be handled.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.172-179
• /
• 1999

As the martensite structure cause fracture failure during drawing from 5.5mm rod to 3.05mm dia. wire without additional heat treatment, the optium cooling condition to inhibit the occurrence of martensite was investigated. In order to get SAE9254+V quality, the effects of alloying element, vanadium on the mechanical properties were investigated. Based upon CCT and TTT curves and the results form cooling test in mill, optimun cooling was found in the condition of the laying head temp of 780$^{\circ}C$ and of the conveyor speed at 0.15m/sec with the whole cover closed. The wire rods produced under the condition showed the best mechanical properties of 120kg/$\textrm{mm}^2$ in TS and 50% in RA, having an excellent drawability. In vanadium added steels, tensile strength was improved without degrading elongation and charpy impact value. That means the strengthening by vanadium is mainly due to the grain refinement by the fine precipitates during tempering process.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• 복식
• /
• 제58권5호
• /
• pp.232-246
• /
• 2008

The museum starts from drawing many visitors by opening remarkable exhibitions, and finally aims to realize the social and educational value. However artifacts on exhibition have antithetic conditions like limitation of collection, problems of preservation, etc. Already the museum exhibited paintings and fine arts reproduced with complete fidelity, so artistic artifacts have meet the aims of exhibition. we would like to make an alternative proposal about costume relics in this way. Costume relics need to reproduce in two ways. The one way is to reproduce with complete fidelity and the other way is to restore the original form. The reproduction and restoration need a concrete survey, historical research, textile like artifacts. Furthermore it is important to reconstruct breakage and discoloration. Permanent exhibition consisted of reproductions helps appreciating as well as protecting artifacts, so exhibition effect will be enhanced.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.105-116
• /
• 2012

Minimalism combines the adjective 'minimal' and the suffix 'ism', and was first coined in the 1960s. Minimalism draws on the belief that when the use of artistic skills and adaptation is minimized and only the essentials or core is expressed, the discrepancy or distance between reality and art can be kept to a minimum; and thus, true reality can be achieved. To realize minimalism, artists creating paintings, sculptures and other forms of visual art eliminate unnecessary elements and strip objects to its essentials. And hence, most minimalist artwork used minimum amount of color and focused on expressing the geometric essence of objects. Such simplistic styles of minimalism can be seen today in various designs. Apple's iPod design and other product designs as well as graphic designs are just few of the examples. Drawing on the spirit of minimalism, Icongraphics pursues beauty and pleasure in the minimal use of color and form. And what lies beneath Icongraphics' artistic style is its pursuit of simplistic essentials, sending a strong message to the digitalized and complex lives of modern people.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.85-91
• /
• 1998

The CAD system which enables to design and draw the screw thread gauges was developed and constructed. This system was proposed based on Visual C++ Version 5.0. Even beginners can get drawings as well as concerned data for the manufacturing of screw thread limit gauges by selecting the input data. This system was constructed form relevant standards and regulations and was developed based on the Korean Standard and referred to ISO, JIS, handbooks and textbooks. This system shall provide more powerful and user friendly tool for design and drawing for screw thread gauges such as metric fine and coarse threads, unified fine and coarse threads, parallel and taper pipe threads. The results of this system are proved to be in good agreement with concerned standards and regulations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.398-401
• /
• 2005

The characteristic of sheet metal process is the few loss of material during process, the short processing time and the excellent price and strength. Such press-forming process are the used machine ability and the characteristic, used material, the accuracy of the part which becomes processing and side condition of a process are considered and the designed. The purpose of this study is apply efficiently sheet metal forming processing by 3D formation-analyzed program simulations in the site. By a study, forming process was simulation to drawing and trimming and cam process using static-implicit method software. By making apply this to an industrial site the productivity improvement and cost reduction etc. effect able was predicted.