• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.187-187
• /
• 2004

진공청소기는 가전 제품 중에서 인간의 일상생활에서 꼭 필요한 가전제품의 하나이다. 그러나, 성능 향상을 위한 과도한 회전 속도 때문에 큰 소음을 유발하며 그로 인해서 사용자에게 소음으로 인한 스트레스나 피로누적 등의 큰 불편을 초래하고 있다. 이것은 진공청소기내에 있는 팬 모터가 30000∼35000 rpm으로 고속회전을 통해서 측에 연결되어 있는 임펠러를 회전시켜 공기를 흡입, 배출시키는 일련의 작동을 하면서 여러 가지 진동 및 유체소음을 일으키기 때문이다. 이러한 진공청소기용 팬모터의 소음 저감 연구는 국내외 관련회사 및 연구소에서 활발히 진행되고 있다.(중략)

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.801-802
• /
• 2006

본 논문은 기존의 전기강판 재질을 이용한 모터가 아닌 SMC 재질을 이용한 모터 성형 시 발생 될 수 있는 문제점이 모터의 자기적 특성에 미치는 영향에 대해 분석 하였다. 기존의 전기 강판 재질 모터에서 밀도는 전 영역에서 고른 분포를 갖는 반면에, SMC를 이용한 모터는 위치와 형상에 따라 다른 밀도와 응력 분포를 지닌다. 따라서 본 논문에서는 이러한 SMC 재질을 이용한 모터의 특성이 전기적 에너지 변환 과정에 미치는 영향에 대해서 분석 하기위해, 고속모터(30000rpm)급 모터에서 silicon steel 재질 모터와 SMC 재질모터를 비교 하였다. 비교결과 SMC 재질 모터의 경우 밀도 편차가 5.8%이상 발생되었으며 이는 전기적 특성에 10%이상 영향을 미치는 것으로 나타났다. 특히 고속모터의 경우 자속 포화가 심해 일정하게 높은 밑도 특성이 요구 되는 것으로 파악 되었으며, 향후 이 방법은 SMC 재질을 이용한 모터 설계에 유용하게 이용 될 수 있을 것으로 판단된다.

• Journal of Astronomy and Space Sciences
• /
• v.9 no.1
• /
• pp.111-119
• /
• 1992

The IUE archival spectra of VV Cephei were collected to investigate the eclipse nature in the ultraviolet. The temperature of the B star has been determined, as approximately 30000K, based on the flux distributions during egress. Light curves of VV Cephei were reduced from the spectrophotometry of the IUE archival spectra. Three light curves at the center wavelengths of 2350 ${\AA}$, 2550 ${\AA}$ and 2850 ${\AA}$ have been analyzed by the modified Wilson and Devinney light curve program. The radii of the B star and M star were deduced to 0.05 and 0.22 of unit separation, respectively. The UV light curves show an evidence that the light was attenuated by the highly opaque atmosphere of the M star.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.456-461
• /
• 2002

Nowadays, there are required more speed and accurate machining in order to improve the productivity through the reduction of cutting and non-cutting time. In this study, the high-speed HMC is specially designed to do remote control and high-speed mechanism with 30000rpm, 50000rpm, 40m/min, 100m/min and bridge type structure. Every structural deformation and vibration that is generated from all of factor is analyzed being based on the virtual manufacturing technologies: thermal characteristic analysis, machine-ability, tool wear measuring system, driving characteristic of linear motor and so on. As the application of these results had been consisted of three axes to move slight and rigid finally. Therefore, table errors that are resulted in change of work weight can be removed.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.134-137
• /
• 2002

A new LTCC material in the $PbWO_4-TiO_2-B_2O_3-CuO$ system was developed. The developed material can be sintered at $850^{\circ}C$ and its dielectric properties are $\varepsilon_r=20-25, Q\timesf_o=30000~50000GHz$ , and $\tau_f=0.2~30ppm/^{\circ}C$, depending on the components moi ratio. Due to its low sintering temperature and microwave dielectric properties, the developed material can be used as a LTCC substrate for fabrication of multilayered microwave communication module set. In present study, using this material, tape casting condition was established. With this processing condition, a T-resonator was fabricated and its electrical properties were examined. Also, a 2-Pole band pass filter was fabricated and its frequency characteristics were compared with simulation results.

• Solar Energy
• /
• v.19 no.1
• /
• pp.37-45
• /
• 1999

As polymer added in flow, the phenomenon of drag reduction effect was found by many experiments and studies. We divided polymer into three molecular weight($2{\times}10^5,\;4{\times}10^5,\;5{\times}10^5$) and into four concentration(1, 5, 10, 20wppm), then we measured the drag reduction effect in the range Reynolds Number with $30000{\sim}60000$. Finally we found that the most effect drag reduction was that molecular weight is $2{\times}10^5$ with 10wppm concentration. Then the concentration was according to PEO molecular weight, and in general DR increase according to Reynolds Number.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.382-385
• /
• 2001

In the previous study, a new LTCC material in the PbWO$_4$-TiO$_2$-B$_2$O$_3$-CuO system was introduced. The developed material can be sintered at 850$^{\circ}C$ and its dielectric properties are $\varepsilon$$\sub$r/=20-25, Qxf$\sub$o/=30000∼500000Hz, and $\tau$$\sub$f/=0.2∼30ppm/$^{\circ}C$, respectively Therefore this material can be used as a LTCC substrate material for fabrication of multilayered high frequency communication module set. In present study, using this material, tape casting condition was established. With this condition, a multilayered resonator was fabricated and its electrical properties were examined. In present study, an antenna-duplexer module was also fabricated. Frequency characteristics of as-fabricated antenna-duplexer module was compared with simulation results.

• Journal of information and communication convergence engineering
• /
• v.21 no.3
• /
• pp.225-232
• /
• 2023

Owing to advancements in intelligent transportation systems (ITS) and artificial-intelligence technologies, various machine-learning models can be employed to simulate and predict the number of traffic accidents under different weather conditions. Furthermore, we can analyze the relationship between weather and traffic accidents, allowing us to assess whether the current weather conditions are suitable for travel, which can significantly reduce the risk of traffic accidents. In this study, we analyzed 30000 traffic flow data points collected by traffic cameras at nearby intersections in Washington, D.C., USA from October 2012 to May 2017, using Pearson's heat map. We then predicted, analyzed, and compared the performance of the correlation between continuous features by applying several machine-learning algorithms commonly used in ITS, including random forest, decision tree, gradient-boosting regression, and support vector regression. The experimental results indicated that the gradient-boosting regression machine-learning model had the best performance.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.92-102
• /
• 2017

Fischer-Tropsch synthesis reaction converts syngas (mixture of CO and H2) to valuable hydrocarbon products. Simulation of low temperature Fischer -Tropsch Synthesis reaction and heat transfer at intensified process condition using catalyst filled single and multichannel microchannel reactor is considered. Single channel model simulation indicated potential for process intensification (higher GHSV of $30000hr^{-1}$ in presence of theoretical Cobalt based super-active catalyst) while still achieving CO conversion greater than ~65% and $C_{5+}$ selectivity greater than ~74%. Conjugate heat transfer simulation with multichannel reactor block models considering three different combinations of reactor configuration and coolant type predicted ${\Delta}T_{max}$ equal to 23 K for cross-flow configuration with wall boiling coolant, 15 K for co-current flow configuration with subcooled coolant, and 13 K for co-current flow configuration with wall boiling coolant. In the range of temperature maintained (498 - 521 K), chain growth probability calculated is desirable for low-temperature Fisher-Tropsch Synthesis.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.496-503
• /
• 1996

Aromatic and aliphatic copolyesters for the dispersing agent were synthesized by two stage reaction, esterification and polycondensation. Copolyesters were blended with PET in the melt state and their thermal and rheological properties were investigated. From GPC analysis Mn's and Mw's of copolyesters were about 30000 and 65000g/mol, respectively. From DSC experiment copolyesters had melting range of $90{\sim}150^{\circ}C$. Copolymer composition was in good agreement with comonomer feed ratio from $^1H$-NMR analysis. Copolyesters and SPA (standard sample) were blended with PET in the melt state. From DSC experiment, copolyesters and SPA were miscible with PET. From the dynamic melt viscosity experiment, melt viscosity of blended sample was increased as the content of aromatic copolyester was increased, while it was decreased as the content of aliphatic and SPA were increased. As for volume resistivity of dry color containing carbon black and copolyesters with dispersing time, aromatic copolyester showed highest value. It was conferred from this result that aromatic copolyester was the best dispersing agent for carbon black in PET resin.