• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.131-134
• /
• 2004

This paper has been studied a ADI-FDTD(Alternating Direction Implicit Finite Difference Time Domain ) algorithm using an alternating Direction time-stepping scheme for GPR( Ground-Penetrating Radar ) system simulation. We did the numerical formulations for three-dimensional ADI-FDTD algorithm and PML(Perfect Matched Layer), and made an simple experiment on a arbitrary cube with programed algorithms. And then we compared its computed results with those of conventional FDTD.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.1
• /
• pp.3-8
• /
• 2002

The effect of ADI heat treatment conditions on the core microstructures and mechanical properties of GCD 45 has been investigated. In the case of $25{\ss}{\AE}$ in diameter, it has been found that pearlite structure is not obtained, and the matrix is consisted of graphite, bainite and retained austenite. Upon cooling isothermally from $900^{\circ}C$, the core structure of 35 mm in diameter is converted to pearlite. However, the structure is transformed to bainite after slow cooling from $900^{\circ}C$ to $800^{\circ}C$.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.2
• /
• pp.114-125
• /
• 1998

In this study, for the first time, we propose the ADI(Adaptive De-Interlacing) algorithm, which improves visually and subjectively, horizontal and vertical edges on the image processed by the ELA (Edge Based Line Average) method. The proposed ADI algorithm enlargesthe window size to 5*3 in order to utilize the feature of the continuity of edges, and the adaptive interpolator is employed to decide adaptiely horizontal, diagonal, and vertical edges. Based on the results of the compter simulation, it is confimed that the new ADI algorithm improve the PSNR by 0.5dB in the Lena image with 512*512 size and by 0.4dB in the sequence image of a salesman, respectively. For the horizontal and vertial edges on the still and salesman sequence images, the proposed ADI algorithm has better visulal improvement than the conventional ELA algorithm.

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.159-168
• /
• 1995

To predict reasonably the movement and the concentration of the pollutants in the coastal area. A simulation model should be prepared considering detail topography with land-sea and the urban effects, and the resolution near the source. The explicit method can not be applied due to the instability of the numerical calculation in high horizontal-grid resolution, while the ADI scheme satisfied with the high horizontal grid resolution and can be used in the fine mesh system which shows the detail topography, atmospheric flow The ADI method which studied the high horizontal grid resolution was excellent. The two dimensional model used in the study using ADI method is proved as a reasonable model to predict the wind field in any small scale area including mountainous coastal urban area.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1021-1027
• /
• 2000

In this study, fatigue tests were performed to examine the effects of micro drill hole on fatigue limit of as cast and austempered ductile cast iron (ADI) using the rotary bending fatigue tester. As results, micro drill holes ($diameter{\leq}0.4mm$) did not influence the fatigue limit of ADI, compared to annealed ductile cast iron; the critical defect size of crack initiation, in ADI was larger than as cast. If the ${\sqrt{area}}$ of micro drill hole and graphite nodule in ADI are comparable, crack initiates at the graphite nodule. When the ruggedness developes through austempering treatment process, microstructure on crack initiation at micro drill hole is tougher than that of as cast ductile cast iron.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.30-35
• /
• 1996

• Journal of Food Hygiene and Safety
• /
• v.16 no.3
• /
• pp.178-187
• /
• 2001

A study has been performed to estimate the average and high (90th percentile of consumers-only) daily intakes of sorbates by age-sex groups (> 3 years old) in Korea. The estimation of daily intakes was based on individual-based dietary intake data in ‘National Health and Nutrition Survey in 1998’and the contents of sorbates from samples. The estimated daily intakes (EDI) of sorbates for average consumers ranged from 0.09 mg/kg/bw/day to 0.51 mg/kg bw/day corresponding to 0.4-2.1% of acceptable daily intake (ADI). For high consumers, the range of EDI of sorbates was 3.42-14.65 mg/kg bw/day corresponding to 13.7-58.6% of ADI. Foods that contributed most to the daily intakes of sorbates for all age-sex groups were processed fish products, processed meat products, and salted floods. There was an inverse relationship between age and the consumption of sorbates for average and high consumers, whereas no marked pattern was emerged by sex categories. The intake levels of sorbates even among high consumers were below the ADI in Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.75-80
• /
• 2005

This study was carried out to measure the amount of daily intake on three synthetic food red colors (Amaranth: R2, Erythrosine: R3, Allura Red: R40) in foods by Korean. Analysis of three synthetic food red colors was conducted by HPLC with the foods including bread, confection, candy, alcoholic beverage, soft drink, ice cream, chocolate, and chewing gum. Recovery rates from the known concentrations of three standard food red colors which were spiked into foods were ranged from 85.1 to 100.4 (%) for each foods. Total Estimated Daily Intake (∑EDI) was from 0 to 1.632 mg/kg bw/day for each food item and from 0.512 to 7.281 mg/person/day for ages (1∼over 65 years old). The data of average food intake for each food item per person per day were obtained from the report of Korean National Nutrition Survey conducted by the Korea Ministry of Health and Welfare in 2001. Total EDI of each red colors per person per day were showed as follows; 0.742 mg/kg bw/day for R2, 0.391 mg/kg bw/day for R3 and 2.018 mg/kg bw/day for R40 as total amount respectively, and the ranges of these values were 0.5∼7.1% of FAO/WHO's Acceptable Daily Intake (ADI) values. Therefore, the amount of daily intake of three synthetic food red colors in Korea was regarded as safe.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.240-248
• /
• 1997

References on the cooking and processing losses of organophosphorus (OP) pesticides in foods were collected and analyzed to indicate that the average removal of whole pesticides being 45% in water washing, 56% in detergent washing, 91% in peeling of fruits, 5l% in blanching-boiling of vegetables, 90% in milling and processing of grains. The theoretical maximum daily intake (TMDI) calculated from the food intake and Korea maximum residue limits showed that 4 among 11 pesticides exceeded the acceptable daily intake (ADI). The estimated daily intake (EDI) calculated from the food intake and monitoring data reached 17.2% of ADI on the assumption that the toxicity of OP pesticides appears as an additive effect. The % ratio of ADI for individual pesticides was 6.1% in diazinon, 5.8% in fenthion, 3.3% in fenitrothion and very low in other pesticides. By applying reduction factors to the EDI, the removal ratio of OP pesticides in cooking and processing appears to be over 50%. In summary, the exposure level of Korean population toward whole OP pesticides was estimated to reach 23% of ADI, which would not cause any health rick as yet, but calls for a systematic risk assessment.

• Korean Journal of Food Science and Technology
• /
• v.45 no.5
• /
• pp.642-651
• /
• 2013

This study sought to evaluate the daily intakes of sodium saccharin and sucralose for individuals in Korea with average and high levels of consumption of both these substances. The estimated daily intake of both sweeteners was determined from analytical data and dietary intake data collected as part of the Korean National Health and Nutrition Survey. Analysis of the data showed that sodium saccharin was found in 53 (15.6%) of 339 processed foods analyzed, whereas sucralose was found in 141 (23.9%) of 590 processed foods analyzed. The average intake of sodium saccharin was 1.18% of the acceptable daily intake (ADI) defined by the Joint FAO/WHO Expert committee on Food Additives (JECFA). The average intake of sucralose was 0.55% of ADI. The 95th percentile intakes of sodium saccharin and sucralose were 5.29% and 15.66% of ADI, respectively. Children 6 years old and younger consumed more sodium saccharin and sucralose than did children from any of the other age groups tested. In conclusion, the average daily intakes of sodium saccharin and sucralose within members of the Korean population fall within safe levels.