• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.25-31
• /
• 1996

In this paper, three different types of commercial tools -P20, NC123K and ceramic- have been used to cut austempered ductile iron(ADI). In the austempered condition the materials are hard, strong and difficult to machine. Thus, we selected a optimum tool material among three different types of used tools in machining of austempered ductile iron. It was used acoustic emission (AE) to know cutting characteristic for selected tool and investigate characteristic of AE signal according to cutting condition and relationship between AE signal and flank wear land of the ceramic tool. The obtained results are as follows ; (1) The ceramic tool among three different types of tools is the best in machining austempered ductile iron. (2) In case of ceramic tool, the amplitude level of AE signal(AErms) is mainly affected by cutting condition and it is proportional to cutting speed. (3)There have been the relationship of direct proportion between the amplitude level of AE signal and flank wear land of the tool. (4) It was observed that the value of AErms was only affected by cutting speed. Therefore it is possible to in-process detec- tion of ceraic tool's wear in case the initial value of AErms at each cutting speed decided.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.865-878
• /
• 2013

This study is being executed to investigate the pesticide residues for agricultural products on the markets in Chungbuk area from 2010 to 2012. The samples used were chard, perilla leaf, leek, spinach, crown daisy, marsh mallow, and winter grown cabbage, These were analyzed by GC/MSD and GC/ECD. Agricultural pesticide levels of spinach was 23.4%, winter grown cabbage 20.6%, chard 14.9%, marsh mallow 14.0%, perilla leaf 13.1%, leek 8.4%, and crown daisy 5.6%. Exceeds of residual pesticides were spinach, chard, leek, perilla leaf, and marsh mallow. Based on these results, a risk assessment was being conducted by used a percentage of acceptable daily intake (%ADI). The %ADI ranged from 0.00014% to 1.73910%, and these values was indicated to have no effects on human health.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.1-14
• /
• 1998

Various numerical methods for the two dimensional shallow water equations have been applied to the problems of flood routing, tidal circulation, storm surges, and atmospheric circulation. These methods are often based on the Alternating Direction Implicity(ADI) method. However, the ADI method results in inaccuracies for large time steps when dealing with a complex geometry or bathymetry. Since this method reduces the performance considerably, a fully implicit method developed by Wilders et al. (1998) is used to improve the accuracy for a large time step. Finite Difference Methods are defined on a rectangular grid. Two drawbacks of this type of grid are that grid refinement is not possibile locally and that the physical boundary is sometimes poorly represented by the numerical model boundary. Because of the second deficiency several purely numerical boundary effects can be involved. A boundary fitted curvilinear coordinate transformation is used to reduce these difficulties. It the curvilinear coordinate transformation is used to reduce these difficulties. If the coordinate transformation is orthogonal then the transformed shallow water equations are similar to the original equations. Therefore, an orthogonal coorinate transformation is used for defining coordinate system. A multigrid (MG) method is widely used to accelerate the convergence in the numerical methods. In this study, a technique using a MG method is proposed to reduce the computing time and to improve the accuracy for the orthogonal to reduce the computing time and to improve the accuracy for the orthogonal grid generation and the solutions of the shallow water equations.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.1
• /
• pp.46-53
• /
• 1998

The variation of the mechanical properties, microstructures and the formation of retained austenite with heat treatment conditions in austempered ductile cast iron has been investigated. In the case of austempered ductile cast iron below 25mm diameter, it has been found that a pearlite structure are not obtained under a super cooled condition at range of $0.05^{\circ}C/sec{\sim}10^{\circ}C/sec$, and the matrix is precipitated in graphite, bainite and retained austenite. After austempering treatment the retained austenite is increased with decreasing cooling rate. The elongation increases with decreasing super cooling rate, and the optimum result has been shown to be the elongation of 15.6% at super cooling rate of $0.05^{\circ}C/sec$. The optimum result has been shown to be the tensile strength-elongation balance of $1656kgf/mm^2.%$ and it is more than doubled to as the casting state and continuous cooling condition.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.1
• /
• pp.31-37
• /
• 1988

This study, based on the monthly rainfall data, was carried out to determine the agricultural drought index which enables to describe the regional and seasonal drought characteristics of rice cropping system in Korea. The results obtained were summarized as follows ; 1.A new agricultural drought index (ADI) was evaluated seasonally according to the product of drought intensity and duration. This ADI is proposed as standard design criterion for irrigation planning. 2.The relationship between agricultural drought index and return periods was figured out. These diagrams could be used to estimate the seasonal drought severity of a certain year and to select design year corresponding to the specific drought frequency. 3.The regional drought characteristics were classified and those are useful to determine proper rice varieties and planting time and make drought counterplans. 4.Spring drought occurred once in 3 or 4 years and in a regional respect, rather frequently occurred in Seoul and Daegu areas than in Busan, Daejeon, Kwangju and Chuncheon areas. Summer drought occurred once in 5 years in Daegu and Busan areas and once in 7 or 8 years in other areas. 5.Sequential drought which gave severe drought damage of rice production occurred once in 20 years in Daegu area and in 10 years in Kwangju area.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.1
• /
• pp.34-43
• /
• 2001

For 202 pesticides with maximum residue limit(MRL) in Korea, anticipated problems were identified and remedial actions were suggested. The risk index expressed as the ratio of theoretical maximum daily intake against ADI which exceeds 80% appeared in 35 pesticides. Items showing 10-fold difference between Korea and Codex MRLs appeared in 35 pesticides and 47 food commodities. In any of the 202 pesticides, nominated crops without MRL were 33 items whereas non-nominated crops with MRL were 50 items. Under the Codex system, cases of separate MRLs among raw materials and processed products were exampled. Remedial actions to minimize the above-mentioned discrepancies were suggested respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.4
• /
• pp.178-187
• /
• 2002

Austempered Ductile Iron (ADI) castings having various chemical composition and heat treatment conditions were investigated. Especially, this study was investigated the influence of various parameters on austempering temperature and alloying elements. The addition of Mo, Cu, and Ni individually or combined in these alloys also investigated. The alloying elements influence the austempering reaction, the microstructures, mechanical properties and amount of retained austenite. In this study, the mechanical properties (ultimate tensile strength(UTS), hardness, elongation) are analysed to show the relationship between alloying elements, austempering temperatures and amount of retained austenite. The amount of retained austenite was the range of 15 - 40%. In case of the alloy to witch Mo, Cu, and Ni was added, the amount of retained austenite was the largest at a constant austempering temperature.

• Journal of Korea Foundry Society
• /
• v.19 no.1
• /
• pp.24-32
• /
• 1999

A series of investigations for Austempered Ductile Iron (ADI) castings were carried out by using the specimens with various chemical compositions and heat treatment conditions. The rolling wear characteristics of alloyed austempered ductile irons under an unlubricated dry rolling condition was evaluated by the Amsler type test with 9.09% sliding ratio. Generally, the wear amount was increased with the austempering temperature and decreased when the hardness of the matrix was higher. The alloying elements also influenced the austempering reaction, the microstructure and the mechanical properties. In this study, the mechanical properties (i.e.) ultimate tensile strength (UTS), hardness, elongation) and the wear resistance are analysed to show the relationship between the alloying elements and the austempering temperatures. Mo, Cu and Ni are alloyed individually or in combination. It has been found that when Cu and Ni alloyed individually to a casting, the wear amount is increased than others with elements alloyed in combination. The amount of rolling wear loss was decreased when Mo was alloyed in cast iron, individually or in combination.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.99-106
• /
• 1993

A two-dimensional numerical analysis is performed for the simulation of intertidal-flat and analysis of hydraulic characteristics during seadike construction in Sae-Man-Keum tidal basin. The shallow water equations are selected as a mathematical model and the Leendertse's ADI scheme is used as the corresponding numerical model. The simulated results of tide and current by the present model agree welt with the experimenta1 results by the hydraulic Lab. or ADC (1989). In the application of the model, the possibility of rapidly varied flow analysis and the introduction of turbulence model required for more accurate hydraulic calculation at closing gap are described. The successive simulation of flooding/drying effects by a modification of the method by Stelling et al. (1986) can easily be used for the intertidal-flat analysis during tidal reclamation.

• Journal of Korea Foundry Society
• /
• v.13 no.2
• /
• pp.187-193
• /
• 1993

In this study, it was examined the relationship between the microstructure, fatigue properties, mechanical properties and retained austenite volume of Mo-Ni ADI corresponding to various austempering temperatures. When the austempering temperature is increased to $370^{\circ}C$, acicular bainite structure was found to be transformed to feathery bainite structure. But at the austempering temperature of $420^{\circ}C$, the dissolved bainite lath was showned. Up to the austempering temperature of $370^{\circ}C$, the volume of retained austenite was increased. However at the austempering temperature of $420^{\circ}C$ a large amount of retained austenite was decreased. In this study, the retained austenite volume was determined by XRD(X-ray diffraction). It was observed that the optimum fatigue properties can be obtained at the condition of austempering temperature $370^{\circ}C$. Under the such conditions, fatigue limit determined as the value of 290 MPa, tensile strength 877MPa elongation 6%, hardness 285(BHN), impact values(CVN) 9.2J and retained austenite volume 30.3%, respectively.