• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.440-445
• /
• 2018

To control the electrical properties of a SiC heating element, we sintered $SiC-ZrB_2$composites by using the spark plasma sintering method. The addition of $ZrB_2$ particles with lower electrical conductivity to the SiC matrices with comparatively higher electrical resistivity lowers the electrical resistivities of the composite material. The $ZrB_2$ particles aggregate to form large particles and 3-1, 3-2, and 3-3 networks, i.e., conduction paths. In our study, about $1-{\mu}m$-sized $ZrB_2$ powders start to form the conduction path at about 10 vol.% of addition, namely the threshold volume. The Joule heating experiment shows that 20 vol.% $ZrB_2$-added SiC heating element has outstanding heating efficiency.

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.43-47
• /
• 2008

Cubic boron nitride(c-BN) films were deposited on tungsten carbide insert tool by microwave plasma enhanced chemical vapor deposition(MPECVD) from a gas mixture of triethyl borate$(B(C_2H_5O)_3)$, ammonia $(NH_3)$, hydrogen$(H_2)$ and argon(Ar). The qualities of deposited thin film were investigated by x-ray diffrac-tion(XRD), field emission scanning electron microscopy(FE-SEM) and micro Raman spectroscope. The surface morphologies of the synthesised BN as well as crystallinity appear to be highly dependent on the flow rate of $B(C_2H_5O)_3$ and $(NH_3)$ gases. The deposited film had more crystallized phases with 5 scem of $B(C_2H_5O)_3$ and $(NH_3)$ gases than with 2 sccm, and the phase was identified as c-BN by micro Raman spectroscope and XRD. The adhesion strength were also increased with increasing flow rates of $B(C_2H_5O)_3$ and $(NH_3)$ gases.

• 대한전자공학회논문지TC
• /
• 제40권8호
• /
• pp.307-317
• /
• 2003

준동기 이동위성 리턴링크에서 MC-CDMA와 MC-DS/CDMA 시스템의 성능을 분석한다. 단말 사이의 칩 옵셋이 수 칩 이내인 준동기가 고려되었다. Walsh 코드를 사용한 MC-DS/CDMA 시스템은 준동기 ±0.5 T/sub c/, MC-CDMA 시스템 준동기 ±5/64 T/sub c//sup MC/ 상황하에서 사용자가 5명인 경우 MC-CDMA 시스템의 성능에 비해 10-3 BER에서 0.3dB 우수하였다. Walsh 코드를 사용한 MC-DS/CDMA은 extended m코드, gold 코드를 사용할 때와 비교하여 0.2dB 이상 성능이 우수하였다. Walsh 코드를 사용한 MC-CDMA 시스템은 사용자가 5명인 경우 준동기 ±5/32T/sub c//sup MC/ 이하이면 gold 코드에 비해서 성능이 1.2dB 이상 우수하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권3호
• /
• pp.1333-1337
• /
• 2014

Background: Astrocytic tumors, the most common primary glial tumors of the central nervous system, are classified from low to high grade according to the degree of anaplasia and presence of necrosis. Despite advances in therapeutic management of high grade astrocytic tumors, prognosis remains poor. In the present study, the frequency and prognostic significance of c-erb-B2 in astrocytic tumors was investigated. Materials and Methods: Records of 72 patients with low- and high-grade astrocytic tumors were evaluated. The expression of C-erbB-2 was determined immunohistochemically and intensity was recorded as 0 to 3+. Tumors with weak staining (1+) or no staining (0) were considered Her-2 negative, while tumors with moderate (2+) and strong (3+) staining were considered Her-2 positive. Results: Of the 72 patients, 41 (56.9%) had glioblastoma (GBM), 10 (13.9%) had diffuse astrocytoma, 15 (20.8%) had anaplastic astrocytoma, 6 (8.3%) had pilocytic astrocytoma. C-erbB-2 overexpression was detected in the tumor specimens of 17 patients (23.6%). Six (8.3%) tumors, all GBMs, exhibited strong staining, 2 (2.7%) specimens, both GBMs, exhibited moderate staining, and 9 specimens, 5 of them GBMs (12.5%), exhibited weak staining. No staining was observed in diffuse astrocytoma and pilocytic astrocytoma specimens. Median overall survival of patients with C-erbB-2 negative and C-erbB-2 positive tumors were 30 months (95%CI: 22.5-37.4 months) and 16.9 months (95%CI: 4.3-29.5 months), respectively (p=0.244). Conclusions: Although there was no difference in survival, C-erbB-2 overexpression was observed only in the GBM subtype.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.412-415
• /
• 1995

By adding 1wt.% $HfB_{2}$ into $Nd_{3-4}Fe_{77-78.5}B_{18.5}$ alloys, the grain growth of $Fe_{3}B/Nd_{2}Fe_{14}B$ composite phases during annealing was found to be hindered by 40~50%. It is proposed that the addition of $HfB_{2}$ leads to the formation of fine dispersoids of $HfB_{2}$ in the $Fe_{3}B/Nd_{2}Fe_{14}B$ composite magnet. The maximum energy product($(B.H)_{max}$) as well as intrinsic coercivity($_{i}H_{c}$) for the $Nd_{3}Fe_{78.5}B_{18.5}\;+\;1wt.%\;HfB_{2}$ alloy were enhanced by more than 25% $(B.H)_{max}=10\;MGOe,\;_{i}H_{c}=2.5\;kOe)$ due to the addition of $HfB_{2}$ while remanent magntization($B_{r}$) was reduced slightly. Itis deduced that the formation of fine dispersoids will also play a role of magnetic domain pinning.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1602-1608
• /
• 2007

The composites were fabricated, respectively, using 61[vol.%] SiC-39[vol.%] $TiB_2$ and using 61[vol.%] SiC-39[vol.%] $ZrB_2$ powders with the liquid forming additives of 12[wt%] $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650[^{\circ}C]$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the Liquid-Phase-Sintered(LPS) $SiC-TiB_2$, and $SiC-ZrB_2$ composite. $\beta\rightarrow\alpha-SiC$ phase transformation was occurred on the $SiC-TiB_2$ and $SiC-ZrB_2$ composite. The relative density, the flexural strength and Young's modulus showed the highest value of 98.57[%], 249.42[MPa] and 91.64[GPa] in $SiC-ZrB_2$ composite at room temperature respectively. The electrical resistivity showed the lowest value of $7.96{\times}10^{-4}[\Omega{\cdot}cm]$ for $SiC-ZrB_2$ composite at $25[^{\circ}C]$. The electrical resistivity of the $SiC-TiB_2$ and $SiC-ZrB_2$ composite was all positive temperature coefficient resistance (PTCR) in the temperature ranges from $25[^{\circ}C]$ to $700[^{\circ}C]$. The resistance temperature coefficient of composite showed the lowest value of $1.319\times10^{-3}/[^{\circ}C]$ for $SiC-ZrB_2$ composite in the temperature ranges from $100[^{\circ}C]$ to $300[^{\circ}C]$ Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.79-86
• /
• 2009

We successfully fabricated C-doped ex-situ $MgB_2$ wires using two different methods such as mechanical alloying(MA) and combined process(CP) of in-situ and ex-situ. In the MA, the precursor powder was prepared with a mixture of $MgB_2$ and 1 at% C powders by planetary ball milling for 0-100 h. In the CP, on the other hand, C-doped $MgB_2$ powder was prepared with Mg, B, and C powders by in-situ process via compaction, sintering, and crushing. The powders prepared by two methods were loaded into Fe tube and then the assemblages were drawn by a conventional powder-in-tube technique. The MA treatment of C-added $MgB_2$ decreased the particles/grains size and resulted in C-doping into $MgB_2$ after sintering, improving the critical current density($J_c$) in high external magnetic field. For the C-doped $MgB_2$ wire by MA for 25 h, the $J_c$ was $4.1{\times}10^3A/cm^2$ at 5 K and 6.4 T, which was 5.9 times higher than that of pure and untreated $MgB_2$ wire. The CP also provided C-doping into $MgB_2$ and improved the $J_c$ in high magnetic field; the C-doped $MgB_2$ wire fabricated by CP exhibited a $J_c$ being 2.3 times higher than that of the ex-situ wire used commercial $MgB_2$ powder at 5 K and 6.0 T($2.7{\times}10^3A/cm^2\;vs.\;1.2{\times}10^3A/cm^2$).

• 한국자기학회지
• /
• 제4권2호
• /
• pp.126-129
• /
• 1994

희토류원소 Pr의 첨가가 Fe-B계 비정질합금의 자왜에 미치는 영향을 조사하기 위하여 비정질 $Fe_{86-x}B_{14}Pr_{x}(2{\leq}x{\leq}8\;at.%)$ 합금을 급속응고법을 이용하여 제조하였다. 급 속응고상태 비정질 $Fe_{86-x}B_{14}Pr_{x}$ 합금의 포화자왜는 Pr이 증가할 수록 증가하여 x=8에 서 약 50 ppm이 얻어졌다. 특히 $300^{\circ}C$에서 2시간 열처리된 비정질 $Fe_{84}B_{14}Pr_{2}$ 합금의 포화자왜는 70 ppm으로 증가하였다. $300^{\circ}C$에서 2시간 열처리된 비정질 $Fe_{84}B_{14}Pr_{2}$ 합금의 교류 자기이력손실 및 교류투자율$(f=50\;kHz,\;B_{m}=0.1\;T)$은 각각 15 W/kg, $5.5{\times}10^{3}$이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.191-193
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC-39vol.% $TiB_2$ and using 61vol.% SiC-39vol.% $ZrB_2$ powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650^{\circ}C$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the SiC-$TiB_2$, and SiC-$ZrB_2$ composites. The ${\beta}\;{\alpha}$-SiC phase transformation was occurred on the $SiC-TiB_2$, $SiC-ZrB_2$ composites. The relative density, the flexural strength and Young's modulus showed respectively value of 98.57%, 226.06Mpa and $86.37{\times}10^3Mpa$ in SiC-$ZrB_2$ composites.

• 대한가정학회지
• /
• 제28권4호
• /
• pp.1.1-13
• /
• 1990

Authors have performed the sensory evaluation tests according to each given items after selecting various lines in order to assess the visual effects by the lines in cloth designing. The evaluations were done by means of ranking tests followed by paired comparison tests. The results obtained were as follows : 1. In the item in than "Shoulder width looks wide", the design C3 showed the best visual effect, and then B1, F8, and A5 comes in order. In "Shoulder width looks narrow", they were A2, F5, F7, and B2 in order. 2. In "Bust looks big", the effect was best in F9, and then B1, F5, C3, and A5 and order. "Bust looks small" item showed A3, C1, and F1 in order. 3. In "Waist looks thick", they were B2, D1, and F7 while in "Waist looks thin", they were B3, F8, and D6 in order. 4. In the item in that "Hip looks big", the best effect was in F9, and then E3, C2, and B4 in order. In "Hip looks small", the best one was C1, and then comes. E1, F6, and F8. 5. In "Upper body looks thick", they were D2, D4, F8, C3 and A5 in order whild in "Upper body looks thin", they were A1, F5, and D7 in order. 6. In the item "Lower body lookds thick", they were F9, C2, E3, B3, and D3 in order. In "Lower body looks thin", the best one was C1, and then D1, E2, F6, and F8 comes in order. 7. In "whole body looks thick", they were F9, F3, D3, and A5, and in "Whole body looks thin", they were F5, A1, C1, and D6 in order. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. F9, B4, D2, and D1.