• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.49-59
• /
• 2001

The purpose of this study was to examine the effect of treatment when the V{\ddot{o}}jta therapy applied to the infant with central coordination disturbance in early stage. The subject were 10 cases : each one with the V{\ddot{o}}jta therapy applied to the group of the infants before 6 months old and the group of the infants over 6 months old. When the V{\ddot{o}}jta therapy was applied I analized the papper which was written about the infants who were diagnosed as moderate CCD and divided two groups which were the infants before 6 months old and the infants over 6 months old. These collected data were analyzed by using t-test. The results of study were as follow; 1. When I compared the locomotion stage after the V{\ddot{o}}jta therapy. t-test showed significant differences. The group of infants before 6 months old had the result 7 to over stage 7 and the group of infants over 6months old had the result 2(p<.05). 2. When I compared the result of the postural reaction after the V{\ddot{o}}jta therapy, 1-test showed significant differences. The group of infants before 6 months old had 6 cases was normalizes and the group of infants over 6 months old had 1 case was normalized(p<.05). 3. When 1 compared the duration of the V{\ddot{o}}jta therapy between the group of infants before 6 months old and the group of infants over 6 months old. t-test showed significant differences. The group of the infants before 6 months old had 5 cases for 1-6 months and 4 cases for 7-15 months, 3 cases for 16-24 months and the group of infants over 6 months old had 6 cases for 7-15 months and cases for 16-24 months, 1 case for 25-30 months(p<.01).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.473-479
• /
• 2011

In this paper, we have compared amorphous InGaZnO (a-IGZO) thin-film transistor (TFT) with the nano-crystalline embedded-IGZO ($N_c$-embedded-IGZO) TFT fabricated by solid-phase crystallization (SPC) technique. The field effect mobility (${\mu}_{FE}$) of $N_c$-embedded-IGZO TFT was 2.37 $cm^2/Vs$ and the subthreshold slope (S-factor) was 0.83 V/decade, which showed lower performance than those of a-IGZO TFT (${\mu}_{FE}$ of a-IGZO was 9.67 $cm^2/Vs$ and S-factor was 0.19 V/decade). This results originated from generation of oxygen vacancies in oxide semiconductor and interface between gate insulator and semiconductor due to high temperature annealing process. However, the threshold voltage shift (${\Delta}V_{TH}$) of $N_c$-embedded-IGZO TFT was 0.5 V, which showed 1 V less shift than that of a-IGZO TFT under constant current stress during $10^5$ s. This was because there were additionally less increase of interface trap charges in Nc-embedded-IGZO TFT than a-IGZO TFT.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.451-463
• /
• 2004

The performance of disk-type catalytic filters impregnated by TiO$_2$ or TiO$_2$-3Al$_2$O$_3$ㆍ 2SiO$_2$ supports and V$_2$O$_{5}$ catalyst was evaluated for selective catalytic reduction (SCR) of NO with ammonia as a reductant. XRD, FT -IR, BET and SEM were used to characterize the catalytic filters prepared in this work. Optimal V$_2$O$_{5}$ loading and reaction temperature for V$_2$O$_{5}$/TiO$_2$ catalytic filters were 3-6 wt.% and 350-40$0^{\circ}C$ at GHSV 14,300 $hr^{-1}$ in the presence of oxygen, respectively. With increasing the V$_2$O$_{5}$ loading from 0.5 to 6 wt%, NO conversion increased from 24 to 96% at 40$0^{\circ}C$ and 14.300$hr^{-1}$, and maintained at 80% over in the V$_2$O$_{5}$ loading range of 3-6 wt.% and then dropped at V$_2$O$_{5}$ loading of 7wt.% over. In comparing V$_2$O$_{5}$/ TiO$_2$ and V$_2$O$_{5}$/ TiO$_2$-3Al$_2$O$_3$ㆍ2SiO$_2$ catalytic fillers, which have same 3wt.% V$_2$O$_{5}$ loading, the V$_2$O$_{5}$/ TiO$_2$-3A1$_2$O$_3$ㆍ2SiO$_2$ catalytic filter showed higher activity than V$_2$O$_{5}$/ TiO$_2$ catalytic filter, but higher differential pressure drops owing to its low air permeability. low air permeability.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.353-359
• /
• 1992

Thermal oxidation and plasma enhanced chemical vapor deposition of tantalum oxide thin films on p-type (100) Si substrates were studied to examine the dielectric nature of T$a_2O_5$ as a Al/T$a_2O_5$/p-Si capacitor. Microstructure and dielectric properties of the capacitors were investigated by XRD, AES, high frequency C-V analyzer, I-V meter and TEM. XRD analysis showed that the structure of T$a_2O_5$ films were amorphous, but the films were crystallized to hexagonal $\delta$-T$a_2O_5$ by 65$0^{\circ}C$ thermal oxidation treatment. It was found that the stoichiometry of the films was more or less close to 2 : 5. Leakage current density and relative dielectric constant of thermal oxidation T$a_2O_5$ film at 60$0^{\circ}C$ was 5.0${ imes}10^{-6}$/A/c$m^2 and 31.5, respectively. In the case of PECVD T$a_2O_5$film deposited at 0.47W/c$m^2 they were 2.5${ imes}10^{-5}$/A/$ extrm{cm}^2$ and 24.0, respectively. The morphology of the films and interfaces were investigated by TEM.

• Natural Product Sciences
• /
• v.1 no.1
• /
• pp.43-49
• /
• 1995

Two cucurbitane-compounds were isolated from the roots of Bryonia alba L. and the chemical structures were established as 19-norlanost-5-ene-3,1l,22-trione-$2{\beta}$, $16{\alpha}$,$20{\beta}$,25-tetrahydroxy-9-methyl (23,24-dihydrocucurbitacin D) and 2-O-${\alpha}$-D-glucopyranosyl 19-norlanost-5-ene-3,11,22-trione-$2{\beta}$,$16{\alpha}$,$20{\beta}$,25-tetrahydroxy-9-methyl (arvenin IV), respectively, on the basis of chemical and spectral methods. Both of the compounds showed cytotoxic activity against cancer cell lines, A549, SK-MEL-2, COLO 205 and L1210.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.15-22
• /
• 1995

To study ecological properties of Vibrio cholerae non-Ol and Vibrio mimicus which have been described as new food poisoning bacteria recently, the influence of factors such as temperature, salinity, pH and chemical oxygen demand (COD) on detection rate and density of these bacteria were evaluated. Fifty four seawater samples and 49 bottom deposit samples from estuary of Kum river from March 26th, 1993 to February 22nd, 1994 were used for this study. The detection rate of V cholerae non-O1 were $16.7\%$ for seawater and $10.2\%$ for bottom deposit, respertively. The total detertion rate of V. cholerae non-O1 $(11.7\%)$ was a little higher than V mimicus $(10.7\%)$. Both V choierae non-O1 and V. mimicus were mainly detected in estuary water of which showed temperature $24^{\circ}C$ above and salinity $10\%o$ below. These bacteria were also detected in bottom deposit on January when the water temperature was $3.5^{\circ}C$. From these results, we supposed that temperature, salinity and organic material were important factors to growth of V. cholerae non-O1 and V. mimicus. V cholerae non-O1 might be grown better than V. mimicus under the fluctuating aquatic environmental condition such as salinity.

• Korean Journal of Materials Research
• /
• v.16 no.7
• /
• pp.416-421
• /
• 2006

The varistor properties of ZPCCL-based ceramics were investigated at different $La_2O_3$ contents in the range of $0{\sim}2.0$ mol%. As $La_2O_3$ content increased, the ceramic density greatly increased in the range of $4.71{\sim}5.77\;g/cm^3$ and the varistor voltage greatly decreased in the range of $503.5{\sim}9.4$ V. The varistor with 0.5 mol% $La_2O_3$ exhibited good nonlinearity, in which the nonlinear exponent is 81.6 and the leakage current is 0.2 ${\mu}A$. Furthermore, the varistors exhibited the high electrical stability, with $%{\Delta}V_{1mA}=-1.1%,%{\Delta}{\alpha}=-3.7%$, and $%{\Delta}I_L=+100%$ for DC accelerated aging stress condition of 0.95 $V_{1mA}/150^{\circ}C/24$ h.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.13-18
• /
• 2011

In this study, precipitation process was developed for the recovery of the lactic acid from calcium lactate fermentation broth. Calcium lactate yield was improved by decreasing the solubility of calcium lactate through the addition of ethanol (25%, v/v) as a co-precipitant. The optimal lime type, lime concentration, stirrer speed, precipitation time, temperature, and solvent amount for $Ca(LA)_2$ precipitation were CaO, 0.0175 g/mL, 220 rpm, 24 h, $5^{\circ}C$, ethanol 25% (v/v), respectively. Lactic acid was easily and efficiently recovered from precipitated $Ca(LA)_2$ by adding sulfuric acid ($Ca(LA)_2/H_2SO_4$ molar ratio=1:1). In the model solution of organic acids and fermentation broth, the overall yields of recovered lactic acid were 62% and 55%, respectively, under the aforementioned optimal conditions.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.209-216
• /
• 2011

Surface coatings were prepared on SKD11 core mold steel by plasma electrolytic oxidation (PEO). The coatings were investigated about the formation condition of core mold steel. SKD11 were coated by PEO in a mix solution of Sodium Aluminate $NaAlO_2$ (10 g/l), Sodium Silicate powder $Na_2SiO_3$ (0.5 g/l), Sodium tungstate dihydrate $Na_2WO_42H_2O$ (0.5 g/l) at less than $30^{\circ}C$. The electrical condition were voltage : 500~600 V; Pulse : 600~1800 Hz; current density 15~20 $A/dm^2$ various time : 3 min~40 min. The coatings surface morphology, cross-section, friction coefficient, hardness were investigated. The PEO coatings on SKD11 core mold steel showed the extended service life.