• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.614-623
• /
• 2015

This study aims to estimate the Green-House-Gas emissions from domestic farmed flounder in the southern sea and Jeju-Do, where is mainly produced, by the assessment of energy consumptions and GHG emissions from domestic fish farms for establishing reduce standards of greenhouse gas from a sustainable perspective. It needs to analyze such GHG emission components as feed, electricity, fuel, fixed capital, fish respiration, and liquid oxygen in two locations by 4 stage running water type farm size of small, small and medium, large and medium, large scale. The result showed that the mean GHG emissions were $36.83kg{\cdot}CO_2/year$ in the southern sea and $24.33kg{\cdot}CO_2/year$ in Jeju-Do, respectively, in the stage of production per fish 1kg at 2 locations and farm size from domestic farmed flounders, and it will give to be useful for policy, planning, and regulation of aquaculture development with establishing GHG reduction standards.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1131-1138
• /
• 2004

The objective of this study was to investigate the effects of different sources of Ca and P on urine and ileal digesta pH, and ammonia ($NH_{3}$), methane ($CH_{4}$), and odor emission. In experiment 1, eight pigs (commercial three-way cross; initial BW 67$\pm$3 kg) were arranged in a repeated 4$\times$4 Latin Square design. All pigs were equipped with a T-cannula in the distal ileum. Four corn-soybean meal based diets were formulated. Diet 1 was the control in which dicalcium phosphate (DCP) and limestone ($CaCO_{3}$) were used as the sources of inorganic P and Ca. In Diets 2 and 3, ${H_{3}}{PO_{4}}$, monocalcium phosphate (MCP), and $CaSO_{4}$replaced DCP and $CaCO_{3}$ as the inorganic sources of P and Ca. Diet 4 was similar to Diet 1 except that it was fortified with HCl to provide an acid load similar to that of diet 2. Urine and ileal digesta pH were determined in pigs fed each of these diets. In Exp. 1, urine pH decreased (p<0.05) in animals consuming diets containing ${H_{3}}{PO_{4}}$-$CaSO_{4}$ (5.85$\pm$0.38) and MCP-$CaSO_{4}$(5.73$\pm$0.30) compared with the DCP-$CaCO_{3}$ diet (6.89$\pm$0.24). In the pigs consuming ${H_{3}}{PO_{4}}$-$CaSO_{4}$, ileal digesta pH decreased compared with the control (5.52$\pm$0.28 vs. 6.66$\pm$0.17; p<0.05). Based on the results of Exp. 1, a total of four trials were performed in environmental chambers for determining how $NH_{3}$, $NH_{4}$, and odor were affected by the different dietary Ca and P sources (Exp. 2). In Exp. 2, pigs fed the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet had decreased (30%) $NH_{3}$ emissions compared with the control (p<0.05). Also, a combination of MCP-$CaCO_{3}$-$CaCl_{12}$ decreased $NH_{3}$ emission by 15% (p<0.05). Emission of $CH_{4}$ was decreased only with the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet with 14% (p<0.05). Odorant emission of phenolics and volatile fatty acids increased roughly three-fold with the DCP-$CaSO_{4}$ diet but was not affected by other test diets. In conclusion, acidogenic Ca and P sources in swine diets can decrease the urinary pH and reduce $NH_{3}$ and $CH_{4}$ emission from swine facilities.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.594-598
• /
• 2015

The effects of Ni on the mechanical properties of WC-Xwt.%Ni-1.5wt.%Si-1.1wt.%$B_4C$ composite (X = 21.6, 23.6, 25.6 and 27.6 wt.%) were investigated in order to replace Co with Ni as the binder metal for hard materials based on WC-Co system. Using X-ray diffraction, optical microscopy, field-emission scanning electron microscopy results, the microstructure, pore distribution and grain size of the composites sintered at $1,150^{\circ}C$ were examined with different fraction (X = 21.6, 23.6, 25.6 and 27.6 wt.%) of binder metal Ni. The average WC grain size of the $WC-Ni-Si-B_4C$ composites was about $1{\mu}m$. The Rockwell hardness : A (HRA) and transverse rupture strength were about 88HRA and $110kgf/mm^2$, respectively. The obtained sample was bonded with SM45C at a temperature of $1,050^{\circ}C$. The thickness and mechanical properties of the bonded area were investigated with different dwell time at a bonding temperature of $1,050^{\circ}C$.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.3
• /
• pp.16-24
• /
• 2010

Recently environmental regulations like the Kyoto Protocol, adopted in 1997, required the 5.2% reduction of the greenhouse gas emission in 1990. And 13th General Assembly in 2007, held in Bali of India, have agreed to duty reduction even in developing countries in 2013. Korean government needs the researches on climate change and the strategic programs for greenhouse gas reduction. In this paper Colorado State University Mesoscale Model(CSU-MM) was applied to simulate the relationship between surface albedo and air temperature. Meteorological model simulation in region of Ansan-City, Shiheung-City showed that mean air temperature became lower with the increase of albedo value. Simulated air temperature became lower $-0.16^{\circ}C$ and $-0.66^{\circ}C$ by 5% and 20% increase of albedo values respectively. And cooling energy saving amount in air conditioning process was calculated according to lowered air temperature. The reduction of air temperature resulted the reduction of air conditioning energy in personal house and commercial buildings. The increase of albedo from 5% to 20% resulted the reduction of air conditioning energy from 44,493 MWh/yr to 183,796 MWh/yr. Additionally the reduction of greenhouse gas emission through the energy saving was calculated after IPCC guideline. In terms of greenhouse gas emission $CO_2$ was reduced form -30,414 ton-$CO_2$/yr to -125,638 ton-$CO_2$/yr according to the reduction of electric energy.

• Clean Technology
• /
• v.27 no.4
• /
• pp.350-358
• /
• 2021

The results of this study shows that the combustor temperature ranged from 848.27 to 1,026.80 ℃, averaging about 976.61 ℃, and the NOx concentration increased as the temperature increased. The urea usage ranged from 291.00 to 693.00 kg d^-1, averaging about 542.34 kg d^-1, and the NOx concentration decreased as the urea usage increased. Residence time was about 3.38 to 9.17 s, averaging about 5.22 s, about 2.61 times larger than the 2 s of the design details. This is 1,086 kg h^-1, averaging about 55.71%, compared to the 1,950 kg h^-1 SRF input permission standard. The combustion chamber area is constant, but the residence time is shown to increase with the decrease of exhaust gas. The O₂/CO ratio was 847.05 to 14,877.34, averaging about 3,111.30, and the NOx concentration slightly increased as the O₂/CO ratio increased. As the combustor temperature and O₂/CO ratio increased, the combustion reaction with nitrogen in the air increased and the NOx concentration slightly increased. As the urea usage and residence time increased, the NOx concentration decreased slightly with an increase in reactivity with NOx. The NOx concentration at the stack ranged from 7.88 to 34.02 ppm with an average of 19.92 ppm, and was discharged within the 60 ppm emission limit value. The NOhx emission factor was 1.058 to 1.795 kg ton^-1, averaging about 1.450 kg ton^-1. This value was about 24.87% of the maximum emission factor of 5.830 kg ton^-1 of other solid fuels. Other synthetic resins and industrial wastes were 79.80% and 43.65% compared to 1.817 kg ton^-1 and 3.322 kg ton^-1, respectively. This value was similar to 1.400 kg ton^-1 of RDF in the NIER notice (2005-9), 10.98% compared to the maximum SRF of 13.210 kg ton^-1. Therefore, the NOx emission factor had a large deviation.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.3
• /
• pp.319-332
• /
• 2010

In general, wastewater treatment systems consume high-energy consumption depending on operation characteristics of the facilities. Therefore, greenhouse gas(GHG) reduction activities that are application of digestion gas, induction of renewable energy etc. are conducted to reduce energy consumption and to increase energy independence ratio. In this study, GHG reduction in wastewater treatment system identified, searched application of Clean Development mechanism(CDM) approved methodology. If the methodologies apply to GHG reduction activities such as application of digestion gas, heat pump system using the wastewater as heat source, hydropower using the methodology determined CDM applicability, otherwise through several assumptions calculated expectable GHG reduction emissions and determined CDM applicability. As a result, the order of calculated GHG reduction emission showed that collected and energy generation of digestion gas is 66,775 $tCO_2$/yr, gas engine cogeneration system is 8,182 $tCO_2$/yr, heat pump system using the wastewater as a heat source is 72,715 $tCO_2$/yr, and hydropower is 561 $tCO_2$/yr. Consequently, the order of calculated Certified Emission Reductions(CERs) benefit showed that heat pump system using the wastewater, as a heat source is 1,381 million won/yr was estimated as the highest, followed by a collected and energy generation of digestion gas is 1,268 million won/yr.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.27
• /
• pp.15-24
• /
• 2009

최근 IMO에서는 온실가스 배출을 규제화 하고자 하는 동향이 있으며 조만간 선박에서 온실가스 배출의 규제가 실현될 것으로 예상된다. 선박에서 배출되는 온실가스는 CO$_2$가 대부분을 차지하고 있으며 세계경제상황에 따른 영향이 고려되지만 지속적으로 증가추세에 있는 CO$_2$를 감소시키기 위한 아국의 대처방안이 필요한 시점이다. 또한 향후 발효될 EEDI를 소개하고 결과적으로 GHG를 저감시키기 위한 방안인 선형개선, 폐열회수시스템, 친환경연료사용기관, SEMP 등에 관한 내용을 다루어 보았다. 이 보고서에서는 GHG를 비롯한 NOx, SOx 및 PM과 같은 유해배출물질을 Top Down방식으로 평가함으로써 선박에서 기인하는 대기오염물질 관련 국내정책 및 해운산업의 장기적인 발전전략에 유용하게 사용될 것으로 기대한다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.6
• /
• pp.24-31
• /
• 2004

국내의 경우, 2004년 5월부터 시행예정인 다중이용시설 등의 실내공기질관리법에 따라서, 학교 등의 일부 건축물을 제외하고 신축공동주택 및 대부분의 거주용 공간에 대한 실내공기질관리법이 제정되었다. 이러한, 건축물 내에는 다양한 오염원(sources)과 휘발성유기화합물(VOCs), 포름알데히드(HCHO), 라돈(Radon), 석면(Asbestos), 일산화탄소(CO), 이산화탄소($CO_2$), 이산화질소(NO$_2$), 오존(O$_3$), 미세 먼지(PM10), 부유세균 등 유해오염물질(contaminants)이 존재하고 있다. 또한, 실내공기오염은 각 오염원에서의 유해오염물질 방산정도(emission rate)가 실내외 환경조건, 적용 건축자재의 종류 및 공법 , 환기설비의 특성 및 유형 등에 따라 큰 차이를 보이고 있으므로, 이에 대한 정확한 측정방법의 정립과 그에 따른 적절한 실태조사의 실시가 필요하다. (중략)

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

This study was performed to estimate non-$CO_2$ greenhouse gases (i.e., GHGs) emission from biomass burning at a local scale. Estimation of non-$CO_2$ GHGs emission was conducted using Landsat TM satellite imagery in order to assess the damage degree in burnt area and its effect on non-$CO_2$ GHGs emission. This approach of estimation was based on the protocol of the 2003 IPCC Guidelines. In this study, we used one of the most severe fire cases occurred Samcheock in April, 2004. Landsat TM satellite imageries of pre- and post-fire were used 1) to calculate delta normalized burn ratio (dNBR) for analyzing burnt area and burn severity of the Samcheok large-fire and 2) to quantify non-$CO_2$ GHGs emission from different size of the burnt area and the damage degree. The analysis of dNBR of the Samcheok large-fire indicated that the total burnt area was 16,200ha and the size of the burnt area differed with the burn severity: out of the total burnt area, the burn severities of Low (dNBR < 152), Moderate (dNBR = 153-190), and High (dNBR = 191-255) were 35%, 33%, and 32%, respectively. It was estimated that the burnt areas of coniferous forest, deciduous forest, and mixed forest were about 11,506ha (77%), 453ha (3%), and 2,978ha (20%), respectively. The magnitude of non-$CO_2$ GHGs emissions from the Samcheok large-fire differed significantly, showing 93% of CO (44.100Gg), 6.4% of CH4 (3.053Gg), 0.5% of $NO_x$ (0.238Gg), and 0.1% of $N_2O$ (0.038Gg). Although there were little changes in the total burnt area by the burn severity, there were differences in the emission of non-$CO_2$ GHGs with the degree of the burn severity. The maximum emission of non-$CO_2$ GHGs occurred in moderate burn severity, indicating 47% of the total emission.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.351-356
• /
• 2014

A spherical $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor for use in white-light-emitting diodes was synthesized using a liquid-state reaction with two precipitation stages. For the formation of phosphor from a precursor, the calcination temperature was $1,100^{\circ}C$. The particle morphology of the phosphor was changed by controlling the processing conditions. The synthesized phosphor particles were spherical with a narrow size-distribution and had mono-dispersity. Upon excitation at 395 nm, the phosphor exhibited an emission band centered at 497 nm, corresponding to the $4f^65d{\rightarrow}4f^7$ electronic transitions of $Eu^{2+}$. The critical quenching-concentration of $Eu^{2+}$ in the synthesized $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor was 5 mol%. A phosphor-converted LED was fabricated by the combination of the optimized spherical phosphor and a near-UV 390 nm LED chip. When this pc-LED was operated under various forward-bias currents at room temperature, the pc-LED exhibited a bright blue-green emission band, and high color-stability against changes in input power. Accordingly, the prepared spherical phosphor appears to be an excellent candidate for white LED applications.