• 한국추진공학회지
• /
• 제20권6호
• /
• pp.18-28
• /
• 2016

듀얼 벨 노즐을 평가하기 위한 기초연구로써 전산수치해석을 진행하였다. 추후 진행할 설계 변수 연구를 위해 듀얼 벨 노즐을 설계하고 입구 조건과 난류 모델, 최적 격자수를 선정하였다. 듀얼 벨 노즐은 KSLV-II 1단 노즐을 기반으로 설계하였다. 입구 조건은 설계 값과의 비교를 통해 비반응 8화학종의 동결유동 모델로 결정하였다. 난류 모델은 SST $k-{\omega}$ 모델이 가장 적합하였다. 격자 민감도 해석을 통해 약 15만개의 최적 격자수를 선정하였다. 본 연구에서 결정한 내용들을 바탕으로 향후 한국형발사체에 듀얼 벨 노즐을 적용한 해석을 진행하여 성능 이득을 연구하고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.177-183
• /
• 2012

The inspiratory flow rate of a human is changed with the amount of the workload. The flow characteristic is affected by the inspiratory flow rate. In the flow field of airway, the both of turbulence intensity and secondary flow affect the deposition pattern of particles which is important for the drug-aerosol targeting. Thus the analysis of the flow characteristic in a human airway is important. The purpose of this study is to investigate the effects of the inspiratory flow rate on the flow characteristics in a human airway. The tubular airway is consistent with the oral cavity, pharynx, larynx and trachea. The relatively inspiratory flow rate is used at each case of human states regarding the workload. By the effect of geometric airway changes, transition to turbulent airflow after the larynx can occur with relaminarization further downstream. The low Reynolds number k-${\omega}$ turbulence model is used for analysis with flow regime. As the inspiratory flow rate is larger, the turbulence kinetic energy and secondary flow intensity increase in airway. On the other hand, the area of recirculation zone is smaller.

• 한국수자원학회논문집
• /
• 제48권4호
• /
• pp.281-290
• /
• 2015

표준 k-${\varepsilon}$, RNG k-${\omega}$ 그리고 k-${\omega}$ SST 난류 모형과 VOF (volume of fluid)기법을 이용하여 사각형 광정위어를 통과하는 난류 흐름의 수면 변화와 유속분포를 수치모의 하였다. 지배방정식은 2차 정확도의 유한체적기법을 이용하여 해석하였으며, 두 개의 서로 다른 격자해상도에서 계산을 수행하여 수치해석 결과의 격자 민감도를 분석하였다. 계산 결과를 Kirkgoz et al. (2008)의 실험 결과 그리고 Moss (1972) 및 Zachoval et al. (2012) 무차원화된 실험값과 비교 분석하여 적용한 수치모형의 정확도를 평가하였다. 수치모의 결과는 사각형 개수로에 설치된 광정위어 흐름의 실험결과들을 합리적으로 예측하고 있으면 적용한 난류모형에 따라서 두 개의 주요 흐름분리 영역에서 계산 결과에 차이가 있는 것으로 나타났다. 표준 k-${\varepsilon}$ 모형은 이들 두 개의 흐름분리영역의 크기를 과소산정하고 있으며, k-${\omega}$ SST 모형은 위어 전면부에서 발생하는 흐름분리 영역을 다소 과대 산정하는 것으로 나타났다. RNG k-${\varepsilon}$ 모형은 전반적으로 양호하게 두 흐름분리 영역을 예측하는 한편, k-${\omega}$ SST 모형은 위어 상류부 모서리에서 발생하는 박리거품의 발생 형태를 가장 잘 예측하는 것으로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.79-87
• /
• 2002

The present work analyzed the effect of mixing vane shape on the flow structure and heat transfer downstream of mixing vane in a subchannel of fuel assembly, by obtaining velocity and pressure fields, turbulent intensity, flow-mixing factors, heat transfer coefficient and friction factor using three-dimensional RANS analysis. NJl5, NJ25, NJ35, NJ45, which were designed by the authors, were tested to evaluate the performances in enhancing the heat transfer. Standard $\kappa-\epsilon$ model is used as a turbulence closure model, and, periodic and symmetry conditions are set as boundary conditions. The flow blockage ratio is kept constant, but the twist angle of mixing vane is changed. The results with three turbulence models( $\kappa-\epsilon$, $\kappa-\omega$, RSM) were compared with experimental data.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.67-77
• /
• 2014

In this study, Explicit Algebraic Reynolds Stress Model (EARSM) which is based on the existing ${\kappa}-{\omega}$ model has been applied to the flow field analysis around ship hulls. Existing transport equations for the turbulent kinetic energy and the dissipation rate are used in almost the same form and anisotropy terms of Reynolds stresses are newly considered. The well-known KVLCC2 and KCS hull forms are selected as validation cases, which were also used in 2010 Workshop on CFD in Ship Hydrodynamics. In case of KVLCC2 double model, comparison of mean velocity distribution, turbulent kinetic energy, and Reynolds stresses near the propeller plane has been carried out and wave elevation and wave profiles have been additionally studied for KCS and KVLCC2 with free surface models. Some improved results for mean velocity distribution at the propeller plane have been obtained while there is little change in free surface wave profiles.

• 에너지공학
• /
• 제24권1호
• /
• pp.149-163
• /
• 2015

본 연구에서는 전산유체역학(Computational Fluid Dynamics, CFD) 해석코드를 사용하여 마스트집합체의 열수력적 안전성에 대한 연구를 수행하였다. 이를 위해 자연대류 벤치마크 문제를 선정하여 CFD 코드의 물리모델을 선정 및 해석 능력을 검증하고 이를 이용하여 마스트집합체에 대한 자연대류 열전달 해석을 수행하였다. 본 연구에서는 Betts et al.의 사각 수직공동에서 난류 자연대류 실험결과를 대상으로 CFD 해석을 수행하여 자연대류 조건에 적용하기 위한 난류 모델로 표준 $k-{\omega}$ 모델을 선정하였다. 이렇게 도출된 난류모델을 CFD코드에 적용하여 Bates et al.에 의해 수행된 PNL(Pacific Northwest Laboratory)의 $2{\times}6$ 번들 실험과 이에 대한 Kwon et al.의 MATRA, Fluent 코드의 해석과 비교 계산을 수행하여 CFD코드의 부수로조건 자연대류 열전달 해석 능력을 검증하였다. 최종적으로 도출된 $k-{\omega}$ 난류 모델을 사용하여 마스트집합체 및 핵연료 집합체에 대한 자연대류 해석을 수행하였다. 해석 결과 수조 내부 및 부수로 내에서 안정적인 자연대류 유동이 발생함을 확인하였으며, 본 유동 조건에서 핵비등이탈비를 계산함으로써 열수력적 안전성을 정량적으로 평가하였다.

• 한국전산유체공학회지
• /
• 제17권4호
• /
• pp.81-86
• /
• 2012

The objective of the present study is to investigate the effects of various turbulence models on the aerodynamic noise of an air-conditioner (AC) indoor unit. The results from URANS (unsteady Reynolds-averaged Navier-Stokes) simulations with the standard k-$\varepsilon$, k-$\omega$ shear stress transport (SST) and Spalart-Allmaras (S-A) turbulence models were analyzed and compared with the noise data from the experiments. The frequency spectra of the far-field acoustic pressure were computed using the Farrasat equation derived from the Ffowcs Williams-Hawkings (FW-H) equation based on the acoustic analogy model. Two fixed fan casings and the rotating cross-flow fan were used as the source surfaces of the dipole noise in the Farrasat equation. The result with the standard k-$\epsilon$ model showed a much better agreement with the experimental data compared to the k-w SST and S-A models. The differences in the pressure spectra from the different turbulence models were discussed based on the instantaneous vorticity fields. It was found that the over-estimated power spectra with the k-w SST and S-A models are related to the emphasized small-scale vortices produced with these models.

• Wind and Structures
• /
• 제19권1호
• /
• pp.75-88
• /
• 2014

The computational fluid dynamic is used to explore new aspects of the hill flow. This analysis focuses on flow dependency and the comparison of results from measurements and simulations to show an optimization turbulent model and the possibility of replacing measurements with simulations. The first half of the paper investigates a suitable turbulence model for determining a suitable site for a wind turbine. Results of the standard k-${\varepsilon}$ model are compared precisely with the measurements taken in front of the hilltop, The Reynolds Stress Model showed exact results after 1.0 times of hill steepness but the standard k-${\varepsilon}$ model and standard k-${\omega}$ model showed greater underestimation. In addition, velocity flow over Pha Taem hill topography and the reference geometry shape were compared to find a suitable site for a turbine in case the actual hill structure was associated with the trapezoid geometric shape. Further study of geometry shaped hills and suitable sites for wind turbines will be reported elsewhere.

• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.187-194
• /
• 2015

탄도수정탄은 기존 포탄의 신관에 카나드가 장착된 조종 장치를 탑재하여 정확도를 향상시키는 지능탄이다. 본 논문에서는 2D 탄도수정탄의 카나드를 설계하기 위하여 다양한 형상 변수에 대한 공력성능을 반실험적 기법을 이용하여 분석하였으며, 이를 바탕으로 초음속에서 항력이 상대적으로 더 적은 카나드 형상을 설계하였다. 또한 CFD 기법을 통한 탄도수정탄의 공력해석 기법을 연구하였으며, 포탄의 탄저 부분 기저항력 예측에 O-type 격자를 바탕으로 한 k-${\omega}$ SST 난류모델이 적합함을 확인하였다. 최종적으로 앞서 개발한 해석 기법을 바탕으로 2D 탄도수정탄의 공력특성 및 탄도조종장치 장착에 따른 항력변화를 계산하였다.

• Nuclear Engineering and Technology
• /
• 제41권7호
• /
• pp.907-920
• /
• 2009

This study was performed to evaluate the prediction capability of a commercial CFD code and to investigate the effects of different geometries such as a 4.4 mm tube and an 8/10 mm annular channel on the detailed flow structures. A numerical simulation was performed for the conditions, at which the experimental data was produced by the test facility SPHINX. A 2-dimensional axisymmetric steady flow was assumed for computational simplicity. The RNG $\kappa-\varepsilon$ turbulence model (RNG) with an enhanced wall treatment option, SST $\kappa-\omega$ (SST) and low Reynolds Abid turbulence model (ABD) were employed and the numerical predictions were compared with the experimental data generated from the experiment. The effects of the geometry on heat transfer were investigated. The flow and temperature fields were also examined in order to investigate the mechanism of heat transfer near the wall. The local heat transfer coefficient predicted by the RNG model is very close to the measurement result for the tube. In contrast, the local heat transfer coefficient predicted by the SST and ABD models is closer to the measurement for the annular channel.