• Journal of the Korean institute of surface engineering
• /
• v.31 no.2
• /
• pp.91-100
• /
• 1998

NiCrAlY/YSZ(8wt%$Y_2O_3-ZrO_2$) functionally graded thermal barrier coating (FGC) layers on a Co-base superalloy (HAYNESS 188) substrate were fabstrate were fabicated using Ar shielded single torch air plasma spraying method. Functional grading with the stepwise compositional change throughout layer thickness. Microstructural observation trvealed a successful fabrication of NiCrAlY/YSZ FGC. From the results of the curvature measurement, adhesive strength measurement and thermal shock test for the FGC, it was concluded that the optimum conditions of functionally graded coating layer thinkness and compositional pattern exit to enhance the properties of FGC, which is closely related to the internal residual stess distribution witin it.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.550-553
• /
• 2005

[ $Pb(Zr_{0.2}Ti_{0.8})O_3$ ] powders, prepared by the sol-gel method, were mixed with an organic vehicle and the PZT thick films were fabricated by the screen-printing techniques on Pt/alumina substrates. The structural and dielectric properties were examined as a function of sintering temperature. The particle size distribution of the powder is bimodal with the mean particle size of about $1.2\;{\mu}m$. The average grain size of the PZT thick films sintered above $1000^{\circ}C$ was about $3.1\;{\mu}m$ and the thickness of the specimens was approximately $41\;{\mu}m$. The relative dielectric constant and dielectric loss of the thick films sintered at $1050^{\circ}C$ were 337 and $1.24\%$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.307-307
• /
• 2010

최근 유한연료의 고갈로 인해 세계 유가가 불안정 됨으로서 대체 에너지에 대한 연구가 많이 진행 되고 있다. 특히 압전 소자를 이용한 에너지 하베스팅은 압전 역효과를 이용한 것으로서 주변에서 무의미하게 버려지는 진동이나 바람, 열 에너지를 실 생활에 사용할 수 있는 전기 에너지로 변환할 수 있는 유망한 기술 중 하나이다. 이러한 에너지 하베스팅 기술은 일본과 같은 선진국에서 이미 지하철 및 일반 다리와 같이 진동이 극히 많은 곳에서 응용되고 있다. 이러한 에너지 하베스팅 기술을 응용 하려면 전압출력 계수($g_{33}$)가 높아야 한다. 이것은 압전 d 상수와 유전상수에 영향을 많이 받는 것으로 알려져 있다. 현재가지 응용되는 압전 하베스팅 조성은 Pb(Zr,Ti)$O_3$ (PZT)를 기초로한 세라믹이 응용되고 있다. Pb(Zr,Ti)$O_3$ (PZT) 세라믹은 Morpohotropic phase boundary(MPB)에서 전기기계 결합계수 (kp) 와 기계적 품질계수 (Qm) 이 각각 0.5와 500으로 우수한 특성을 나타낸다. 또한 큐리온도 (Tc) 도 $400^{\circ}C$로 온도 안정성 또한 높다. 하지만 $1000^{\circ}C$ 이상에서 소결하는 PbO는 소결 중 급격한 휘발로 환경적 오염 뿐 아니라 특성의 저하를 야기시킨다. 그래서 몇몇 나라에서는 그 사용을 제한하고 점차적으로 사용을 줄여 나가고 있는 동시에 PbO가 첨가되어 있지 않은 Lead-Free 세라믹의 연구가 많이 진행되고 있다. Lead-Free 세라믹 중 alkaline niobate를 기초로 한 페로브스카이트 구조의 ($Na_{0.5}K_{0.5})NbO_3$ (NKN) 은 PbO를 기초로 한 세라믹을 대체할 유망한 후보자 중 하나이다. 하지만 NKN세라믹의 K 성분의 조해성 및 고온에서의 휘발로 인해 일반 적인 소결 방법으로는 고밀도의 세라믹을 얻기 매우 어렵다. 그래서 Hot pressing, Hot forging, RTGG(Reactive Template Grain Growth), SPS(Spark plasma Sintering)와 같은 특별한 소결 법을 이용하거나 $K_8CuNb_4O_{23}$(KCN) 이나 $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$(KCT) 등을 첨가하여 그 소결성을 향상 시키는 방법도 있다. 또한 압전 d상수를 향상 시키기 위해 $Nb_2O_5$나, $La_2CO_3$, $CeO_2$, $Li_2CO_3$ 등을 치환함으로써 압전 d상수를 향상 시켜 전압출력 계수를 높이는 연구 또한 많은 보고가 되어 있다. 특히 $Li_2CO_3$의 첨가는 일반 적인 소결 방법으로도 밀도의 조밀함을 향상 시켜 그에 따른 높은 유전율과 전기기계 결합계수, 압전 d상수를 가져 많은 연구가 되어지고 있다. 그래서 본 연구에서는 일반적인 ($K_{0.5}N_{0.5})_{1-x}Li_x(Nb_{0.96}Sb_{0.04})O_3$ + 0.2mol%$La_2O_3$ + 1.2mol%$K_8CuNb_4O_{23}$ 세라믹에 x(=Li) 치환에 따른 유전 및 압전특성을 조사하였다.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.186-194
• /
• 2013

The relationship between composition and properties of enamel glass was investigated by introducing a mixture design. The enamel glass was manufactured by mixing various components under the following constraints: $45{\leq}SiO_2{\leq}55$, $10{\leq}B_2O_3{\leq}18$, $6{\leq}Na_2O{\leq}15$, $1{\leq}Li_2O{\leq}6$, $5{\leq}K_2O{\leq}10$, $0{\leq}TiO_2{\leq}8$, $0{\leq}ZrO_2{\leq}8$, 13.3MO (mol %). A mathematical model for the calculation of some properties of enamel glasses as a function of their composition was developed by the experimental statistical method. The results showed that the proposed model with the experimental measurement were in good agreement and the mixture experimental design was an effective method for optimizing the composition of the enamel glass with respect to its properties.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.508-512
• /
• 2004

For abutment of dental implants, (Y, Nb)-TZP/Alumina composites were prepared by addition of 10-90 vol% alumina at an interval of 10 vol％ into tetragonal zirconia solid solution which consists of 90.24 mol% Zr $O_2$, 5.31 mol% Y$_2$ $O_3$, and 4.45 mol% Nb$_2$O$\_$5/. Biaxial flexure strength and fracture toughness of composite were optimized by adding 10 vol% alumina, which resulted in 900 MPa and 8.9 MPam$\^$1/2/, respectively. The composite did not undergo low temperature degradation even after autoclave treatment at 200$^{\circ}C$ for 10 h. 65 of (Y, Nb)-TZP/Alumina composite abutments were employed into 40 patients and any adverse reaction, screw loosing, or fracture of abutments was not observed for the span of 2 years, indicating that the ceramic abutments can be safely used for restorations.

• Progress in Superconductivity
• /
• v.8 no.2
• /
• pp.175-180
• /
• 2007

High temperature superconductor $YBa_2Cu_3O_{7-x}$ (YBCO) films have been grown by in-situ electron beam evaporation on artificial metal tapes such as ion-beam assisted deposition (IBAD) and rolling assisted biaxially textured substrates (RABiTS). Deposition rate of the YBCO films is $10{\sim}100{\AA}/sec$. X-ray diffraction shows that the films are grown epitaxially but have inter-diffusion phases, like as $BaZrO_3\;or\;BaCeO_3$, at their interfaces between YBCO and yttrium-stabilized zirconia (YSZ) or $CeO_2$, respectively. Secondary ion mass spectroscopy depth profile of the films confirms diffused region between YBCO and the buffer layers, indicating that the growth temperature ($850{\sim}900^{\circ}C$) is high enough to cause diffusion of Zr and Ba. The films on both the substrates show four-fold symmetry of in-plane alignment but their width in the -scan is around $12{\sim}15^{\circ}$. Transmission electron microscopy shows an interesting interface layer of epitaxial CuO between YBCO and YSZ, of which growth origin may be related to liquid flukes of Ba-Cu-O. Resistivity vs temperature curves of the films on both substrates were measured. Resistivity at room temperature is between 300 and 500 cm, the extrapolated value of resistivity at 0 K is nearly zero, and superconducting transition temperature is $85{\sim}90K$. However, critical current density of the films is very low, ${\sim}10^3A/cm^2$. Cracking of the grains and high-growth-temperature induced reaction between YBCO and buffer layers are possible reasons for this low critical current density.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.141-146
• /
• 2002

This paper has studied to obtain the grinding characteristics and optimal grinding conditions of ceramic materials in the grinding with diamond wheel by design of experiments. The load on wheel by varying the feed rate was related with the surface roughness due to the minute destruction phenomenon of grains for the $Si_3\;N_4\;and\;ZrO_2$. The depth of cut is related with the surface roughness because the grinding is carried out by grain shedding process due to the brittle fracture phenomenon for the $A1_2\;O_3$. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiments using design of experiments.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.227-235
• /
• 1983

The dielectric and piezoelectic properties in which $(Zr_{0.52} Ti_{0.48})^{+4}$ ions of $Pb(Zr_{0.52} Ti_{0.48})O_3$ are partially substituted for $W^{+6}$ ions were studied. $ZrTiO_4$ was made by coprecipitation. The specimens of disc shape were sintered respectively at 1180$^{\circ}$to 130$0^{\circ}C$ at an intervals of 2$0^{\circ}C$ for 1 hour. The optimum sintering temperature were found to be between 126$0^{\circ}C$ and 128$0^{\circ}C$. PZT solid solutions sintered had the tetragonal structure with c/a=1.025$\pm$0.005 and theoretical densities incre-ased from 8.02 to 8.17g/cm3 with increasing the amount of the partial substitution of $(Zr_{0.52} Ti_{0.48})^{+4}$ ion for $W^{+6}$ ion The grain size and curie temperature decreased with increasing the amount of $WO_3$ while the dielectric constant increased. When $(Zr_{0.52} Ti_{0.48})^{+4}$ ion was substituted for 1 mole% of $W{+6 ]$ion the planar coupling coefficient$(K_P)$ was as high as 0.58 But as the amount of $WO_3$ increased the mechanical quality factor(Qm) decreased considerably.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.419-422
• /
• 2000

This paper was to measure the structure, piezoelectric properties of 0.05Pb($A1_{0.5}$$Nb_{0.5}$)-0.95Pb($Zr_{0.52}$$Ti_{0.48}$)$O_3$ ceramics dopped with additive after creating the specimens with a general method. It is shown that X-ray diffraction pattern variation of lines (200) have tendency to move in simple peak by addition of additive. According to the increase of $Cr_2$$O_3$, tetragonality hardly have variation, according to the increase of $Fe_2$$O_3$, tetragonality decreased on the whole. According to dopping with $Cr_2$$O_3$ and $Fe_2$$O_3$, electromechanical factor(kp) largely increased, in case of sintering at $1200^{\circ}C$ kp was maximum value of 40.04[%] at $Cr_2$$O_3$ 0.3wt%, and maximum value of kp 42.9 [%] at $Fe_2$$O_3$, 0.9wt%. In case of sintering at 120$0^{\circ}C$, mechanical duality factor(Qm) was maximum value of Qm 268.8 at $Cr_2$$O_3$, 0.9 wt%.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.329-342
• /
• 2006

The purpose of this study is to determine the geochemical characteristics for the stream sediments in the Konyang area. So we can estimate the environment contamination and understand geochemical disaster. We collect the stream sediments samples by wet sieving along the primary channels and slowly dry the collected samples in the laboratory and grind to pass a 200mesh using an alumina mortar and pestle for chemical analysis. Mineralogy, major, trace and rare earth elements are determined by XRD, XRE, ICP-AES and NAA analysis methods. For geochemical characteristics on the geological groups of stream sediments, the studied area was grouped into quartz porphyry area, sedimentary rock area, anorthosite area and gneiss area. Contents of major elements for the stream sediments in the Konyang area were $SiO_2\;41.86{\sim}76.74\;wt.%,\;Al_{2}O_{3}\;9.92{\sim}30.00\;wt.%,\;Fe_{2}O_{3}\;2.74{\sim}12.68\;wt.%,\;CaO\;0.22{\sim}3.31\;wt.%,\;MgO\;0.34{\sim}3.97\;wt.%,\;K_{2}O\;0.75{\sim}0.93\;wt.%,\;Na_{2}O\;0.25{\sim}1.92\;wt.%,\;TiO_{2}\;0.40{\sim}3.00\;wt.%,\;MnO\;0.03{\sim}0.21\;wt.%,\;P_{2}O_{5}\;0.05{\sim}0.38\;wt.%$. The contents of trace and rare earth elements for the stream sediments were $Cu\;7{\sim}102\;ppm,\;Pb\;15{\sim}47\;ppm,\;Sr\;48{\sim}513\;ppm,\;V\;29{\sim}129\;ppm,\;Zr\;31{\sim}217\;ppm,\;Li\;14{\sim}94\;ppm,\;Co\;5.6{\sim}32.1\;ppm,\;Cr\;23{\sim}259\;ppm,\;Cs\;1.7{\sim}8.7\;ppm,\;Hf\;2.1{\sim}109.0\;ppm,\;Rb\;34{\sim}247\;ppm,\;Sc\;4.5{\sim}21.9\;ppm,\;Zn\;24{\sim}609\;ppm,\;Sb\;0.8{\sim}2.6\;ppm,\;Th\;3{\sim}213\;ppm,\;Ce\;22{\sim}1000\;ppm,\;Eu\;0.7{\sim}5.3\;ppm,\;Yb\;0.6{\sim}6.4\;ppm$. Generally, the contents of $Al_{2}O_{3}\;and\;SiO_2$ had a good relationships with each other in rocks but it had a bad relationships in stream sediments for this study area. The contents of $Fe_{2}O_3$, CaO, MnO and $P_{2}O_{5}$ had a good relationships with major and minor elements in stream sediments of this study area. The contents of Co and V in the stream sediments had a good relationships with other toxic elements.