• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1067-1072
• /
• 2003

Zn-Pr-Co-Cr-Dy 산화물계로 구성된 바리스터 세라믹스의 전기적 안정성을 몇 가지 DC 가속열화 스트레스 조건하에서 0.0∼2.0 mol% Dy$_2$O$_3$ 첨가량의 변화에 따라 조사하였다. 바리스터 세라믹스의 밀도는 Dy$_2$O$_3$ 첨가량이 0.5 mol%까지 증가하였으며, 보다 많이 첨가하면 감소하는 것으로 나타났다. 밀도는 전도경로와 밀접한 관계로 인해서 안정성에 큰 영향을 미치는 것으로 나타났다. Dy$_2$O$_3$ 첨가는 바리스터 세라믹스의 비직선 지수를 45 이상, 누설전류를 대략 1.0 $\mu$A 이하로 비직선성을 크게 개선시켰다. DC 스트레스 조건 0.95 V$_{1mA}$/15$0^{\circ}C$/24 h에서 안정성을 조사한 결과, 0.5 mol% 첨가시 상대적으로 가장 높은 안정성을 나타내었다. 전압-전류특성에 있어서 바리스터 전압, 비직선 지수, 누설전류의 변화율은 각각 -0.9%, -14.4%, +483.3%이었으며, 유전특성에 있어서 비유전율 및 손실계수의 변화는 각각 +7.1%, +315.4%이었다. 그 외의 바리스터 세라믹스는 낮은 밀도 때문에 열폭주 현상을 나타내는 매우 불안정한 특성을 나타내었다.다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.284-289
• /
• 2014

The effects of additives (Nb, Bi and Cr) on the microstructure, varistor properties, and aging behavior of V/Mn/Co/ La/Dy co-doped zinc oxide ceramics were systematically investigated. An analysis of the microstructure showed that all of the ceramics that were modified with various additives were composed of zinc oxide grain as the main phase, and secondary phases such as $Zn_3(VO_4)_2$, $ZnV_2O_4$, and $DyVO_4$. The $Bi_2O_3$-modified samples exhibited the lowest density, the $Nb_2O_5$-modified sample exhibited the largest average grain size, and the $Cr_2O_3$-modified samples exhibited the highest breakdown field. All additives improved the non-ohmic coefficient (${\alpha}$) by either a small or a large margin, and in particular an $Nb_2O_5$ additive noticeably increased the non-ohmic coefficient to be as large as 36. The $Bi_2O_3$-modified samples exhibited the highest stability with variation rates for the breakdown field and for the non-ohmic coefficient (${\alpha}$) of -1.2% and -26.3%, respectively, after application of a DC accelerated aging stress of 0.85 EB/$85^{\circ}C$/24 h.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.398-403
• /
• 2001

There is a potential usability of electric arc furnace(EAF) dust produced during the iron manufacturing process as a recycled resource, because valuable materials such as Zn, Pb and Fe are contained in it. In this study, metallic Zn was recycled from the fine electric arc furnace dust by a solid state reduction method using carbon at relatively low temperature. It was possible to recover metallic zinc by using of high vapour pressure of zinc with this reduction method. The feasibility of recycled zinc for cold bonded pellet(CBP) was investigated. The main composition of EAF dust were franklinite(ZnFe$_2$O$_4$), magnetite(Fe$_3$O$_4$) and zincite(ZnO), and Pb and Cl were completely removed by a heat treatment in oxidation environment. The reduction ratio increased as the solid carbon content increased, and it increased with decreasing of dust particle size and increasing of compaction pressure due to a increase of contact area.

• 한국결정학회지
• /
• 제15권2호
• /
• pp.78-82
• /
• 2004

벤젠 존재 하에서, DMF와 에탄올의 혼합 용매에서 zinc(II) nitrate $(Zn(NO_3)_2\;{\cdot}\;6H_2O)$와 $ATP(2-aminoterephthalate,\;H_2N-C_6H_3-1,4-(COO)_2)$의 용매열 반응으로 2차원 배위 고분자 [Zn(ATP) (DMF)] (1)이 얻어졌다 X-ray구조 결정 결과, 2개의 아연 금속과 4개의 ATP 리간드가 paddle-wheel유형의 2차 쌓음 단위들을 형성하고, 이것들은 ATP 리간드에 의해서 연결되어 2차원 4각 망을 이룬다는 것이 밝혀졌다. 아연 금속을 기준으로 각 4각형의 크기는 약$11.1\times11.1\;{\AA}$효이다. 고분자 1을 양질의 결정 상태로 얻기 위해서는 벤젠이 요구되었다.

• 한국분말재료학회지
• /
• 제14권3호
• /
• pp.180-184
• /
• 2007

The material design and synthesis are of important to modem science and technology. Here, we report the synthesis of multifunctional nanomaterials with different properties: feroelecties $YMnO_3$ and multiferroic materials such as $CoFe_2O_4-YMnO_3,\;Fe_3O_4-YMnO_3,\;CoFe_2O_4-Cd_{0.85}Zn_{0.15}S,\;and\;Fe_3O_4-Cd_{0.85}Zn_{0.15}S$ nano-composites by using a chemical synthesis process. These results provide a simple and convenient synthesis process to produce multifunctional nanocomposites.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.735-744
• /
• 2000

The electrical procerties and stability of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Er$_2$O$_3$ (ZPCCE) based varistors were investigated in the Er$_2$O$_3$content range of 0.0 to 4.0 mol%. ZPCCE ceramics containing 2.0 mol% Er$_2$O$_3$ exhibited the highest density of 5.74 g/㎤ corresponding to 99.3% of theoretical density. The varistors with 0.5 mol% and 2.0 mol% Er$_2$O$_3$exhibited a relatively satisfying nonlinearity, which the nonlinear exponent is 40.50 and 47.15, respectively and the leakage current is 2.66 $mutextrm{A}$, respectively. Under more severe d.c. stress, such as (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$/12h)+(0.90 V$_{1mA}$12$0^{\circ}C$/12h)+(0.95 V$_{1mA}$1$25^{\circ}C$12h), they showed a very excellent stability, which the variation rate of the variator voltage is -0.89% and -0.15%, the variation rate of the nonlinear coefficient is -4.67% and -3.56%, and the variation rate of leakage current is -6.02% and -19.56%, respectively. It is surely bellived that ZnO-0.5 mol% Pr$_{6}$O$_{11}$-1.0 mol% CoO-0.5 mol% Cr$_2$O$_3$-x mol% Er$_2$O$_3$(x=0.5, 2.0) based varistors will be greatly contributed to develop the advanced Pr$_{6}$O$_{11}$-based ZnO varistors in future.uture. future.uture.

• 한국세라믹학회지
• /
• 제50권3호
• /
• pp.231-237
• /
• 2013

Thermodynamic modeling of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite system has been adopted as a rational approach to establish routes to better synthesis conditions for pure phase $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite. Quantitative analysis of the different reaction equilibria involved in the precipitation of $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ from aqueous solutions has been used to determine the optimum synthesis conditions. The spinel ferrites, such as magnetite and substitutes for magnetite, with the general formula $MFe_2O_4$, where M= $Fe^{2+}$, $Co^{2+}$, and $Ni^{2+}$ are prepared by coprecipitation of $Fe^{3+}$ and $M^{2+}$ ions with a stoichiometry of $M^{2+}/Fe^{3+}$= 0.5. The average particle size of the as synthesized $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$, measured by transmission electron microscopy (TEM), is 14.2 nm, with a standard deviation of 3.5 nm the size when calculated using X-ray diffraction (XRD) is 16 nm. When $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite is annealed at elevated temperature, larger grains are formed by the necking and mass transport between the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite nanoparticles. Thus, the grain sizes of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ gradually increase as heat treatment temperature increases. Based on the results of Thermogravimetric Analysis (TGA) and Differential Scanning Calorimeter (DSC) analysis, it is found that the hydroxyl groups on the surface of the as synthesized ferrite nanoparticles finally decompose to $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ crystal with heat treatment. The results of XRD and TEM confirmed the nanoscale dimensions and spinel structure of the samples.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.840-844
• /
• 2003

The main objective of this investigation is to improve the photoluminescent of $Zn_{2}SiO_{4}:Mn$ phosphors prepared by the sol-gel technique. We try to use adding a new co-dopan such as Cr and Ti. The calcination temperature of sol-gel technique(1100 $^{\circ}C$) was lower than that of the solid state reaction (1300 $^{\circ}C$). Under 147nm excitation, the maximum emission intensity was obtained when the concentration of Cr and Ti was 0.1mol% with respect to $Zn_{2}SiO_{4}:Mn$. In order to study the effect of co-dopant, the content of Mn and the ratio of water to TEOS were fixed at 2mol% and 36:1, respectively.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.675-681
• /
• 2012

We aimed to examine the co-doping effects of 1/6 mol% $Mn_3O_4$ and 1/4 mol% $Cr_2O_3$ (Mn:Cr = 1:1) on the reaction, microstructure, and electrical properties, such as the bulk defects and grain boundary properties, of ZnO-$Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi = 0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Mn,Cr-doped ZBS, ZBS(MnCr) varistors were controlled using the Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$), ${\alpha}$-spinel ($Zn_7Sb_2O_{12}$), and ${\delta}-Bi_2O_3$ (also ${\beta}-Bi_2O_3$ at Sb/Bi ${\leq}$ 1.0) were detected for all of the systems. Mn and Cr are involved in the development of each phase. Pyrochlore was decomposed and promoted densification at lower temperature on heating in Sb/Bi = 1.0 system by Mn rather than Cr doping. A more homogeneous microstructure was obtained in all systems affected by ${\alpha}$-spinel. In ZBS(MnCr), the varistor characteristics were improved dramatically (non-linear coefficient, ${\alpha}$ = 40~78), and seemed to form ${V_o}^{\cdot}$(0.33 eV) as a dominant defect. From impedance and modulus spectroscopy, the grain boundaries can be seen to have divided into two types, i.e. one is tentatively assigned to ZnO/$Bi_2O_3$ (Mn,Cr)/ZnO (0.64~1.1 eV) and the other is assigned to the ZnO/ZnO (1.0~1.3 eV) homojunction.

• 대한화장품학회지
• /
• 제47권3호
• /
• pp.227-235
• /
• 2021

자외선 및 블루영역 차단 기능을 갖는 화장품의 원료로 사용되기 위한 박막 판형의 ZnO 및 Fe₂O₃ 성분을 포함하는 인공 칼라민 세라믹 분말 소재를 합성하였다. 20 : 1에서 50 : 1 범위의 높은 종횡비를 가지는 (0001)면의 판형 ZnO 세라믹 분말 소재는 아연공기전지로 전력 생산한 후에 회수한 전해질을 출발 물질로 하여 징크아세테이트와 소듐시트레이트 혼합 용액에서 중화반응을 통한 석출로 합성하였다. 아이언 클로라이드 용액의 첨가량을 증가시키는 방법으로 인공 칼라민 세라믹 분말 내의 Fe₂O₃ 함량을 높일 수 있었으며, 이 경우 자외선뿐만 아니라 가시광선의 블루 영역을 일부 흡수하였다. 포타슘 아세테이트 용액을 첨가시킬 경우에는 Zn(OH)₄^2- 음이온의 분해를 촉진하여 (0001) 면 위에 수직 방향으로 격벽 형태로 성장한 박막을 얻을 수 있었는데, 이 경우 자외선을 흡수할 수 있는 기회가 증가하면서 자외선 흡수율이 증가하였다. 아이언 클로라이드 용액과 포타슘 아세테이트 용액의 첨가량을 함께 조절하면 박막 판형의 인공 칼라민 세라믹 분말의 조성 및 형상을 최적화시킬 수 있어서 화장품 제형을 진행할 경우 블루영역의 광투과도가 크게 감소하였다.