• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.34-43
• /
• 2002

The purpose of this study was to compare microleakage and marginal hybrid layer in class V restorations using two one-bottle adhesives and one self-etching adhesive. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were pre-pared on buccal and lingual surfaces of 30 extracted human molar teeth. Prepared teeth were randomly divided into three treatment groups (n=30) and restored with three adhesives and composites: Single Bond/Filtek Z-250 (Group 1), Prime&BondNT/Esthet.X (Group 2), UniFil Bond/UniFil F (Group 3). For microleakage, samples were stored in room temperature water for 24 hours, thermocycled stained with 2% methylene blue dye, sectioned into halves, scored and analysed using Mann-whitney test and Wilcoxon signed rank sum test. For marginal hybrid layer, samples were sectioned into halves, treated with 10% phosphoric acid for 5 seconds, stored in 5% NaOCL solution for 24 hours, dried and gold coated. Occlusal and gingival margins of each sample were inspected under SEM. The results of this study were as follows ; 1. Microleakage at the occlusal margins was not evident in group 1 and group 2, but it showed in group 3 (p<0.05). 2. Microleakage in group 1 and group 3 was significantly lower than in group 2 at gingival margins (p<0.05). 3. Microleakage at gingival margins was greater than at occlusal margins in group 1 and group 2, but microleakage at occlusal margins was greater than at gingival margins in group 3 (p<0.05). 4. In group 1 and group 2, no gaps at occlusal margins showed. But gaps showed in group 3. Occlusal margins were free from a hybrid layer in all groups 5. The thickness of the marginal hybrid layers was 2.5~5 $\mu\textrm{m}$ thick in group 5 $\mu\textrm{m}$ thick in group 2 and 1.5 $\mu\textrm{m}$ thick in group 3. 6 There was no corelation between microleakage and thickness of marginal hybrid layer. In coclusion, the effect of dentin adhesives on microleakge in class V composite restorations was excellent when one-bottle adhesives were applied on enamel margin, and it was good when a self-etching adhesive was applied on dentinal margin. There was no corelation between microleakage and thickness of marginal hybrid layer.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.9-13
• /
• 1965

Powdery mildew of Ailanthus altissima Sw. was first reported by J.S. Park in Korea, 1961. According to his report, this disease was found on the leaves of this tree species collected in Jeongup, 1957, and in Taejon, 1958. He described morphological characters of this pathogen and described also that the causal fungus may be closely related with Phyllactinia corylea. This disease which appears dusty grayish yellow molds under surface of leaves was collected again by the author in Kwangju, 1962. The present works were undertaken to make clear the species of causal fungus by means of the morphology and pathogenecity. According to the following results, the pathogen was identified as Phyllactinia corylea (Pers.) Karst. Morphological characters of the fungus Mycelia persistent or more or less evanescent; matured conidia solitary, aseptate, short-clavate to clavate to clavate, hyaline or yellowish, granulate, $44.6-89.2{\times}9.3-24.2{\mu}$, average $64.8-17.8{\mu}$ in size; conidiophores elongate clavate or columnar, hyaline, 2-3 septate, $122.8-346.0{\times}3.7-7.4{\mu}$, average $208.8{\times}6.3{\mu}$; per-thecia usually scattered, rarely gregarious, dark brown to black, depressed globose to globose, $223.2-297.6{\mu}$, average $267.8{\mu}$ in diameter; appendages 12-19, usually 15 in number, hyaline, straight, needle-shaped, sharply pointed at the apex and bulbous at the base, aseptate, $93.0-310.0{\times}5.0-8.0{\mu}$, average $173.3{\times}6.4{\mu}$ in size; asci elongate ellipsoidal to broadly clavate, hyaline, more or less stalked, 8-13 in number, $68.5-76.6{\times}26.1-34.2{\mu}$, average $71.4{\times}29.0{\mu}$ in size; ascospores 2-4, usually 2 in number, hyaline or yellowish, aseptate, ellipsoidal or ovate, $27.7-34.2{\times}14.7-17.9{\mu}$, average $25.5{\times}13.9{\mu}$ in size. Pathogenicity of the fungi In order to make clear the species of the fungus and the pathogenic differences of Phyllactinia fungi which are collected around the contaminated area and seemed to be related to Ailanthus powdery mildew, some inoculation experiments were performed. 1. Cross inoculation to several tree species with their pathogen: Tested materials; Phyllactinia in question on Ailanthus altissima Sw. Ph. fraxini (DC.) Homma. On Alnus firma S. et Z. Ph. moricola (P. Henn.) Homma on morus alba L. According to the results of the experiments, the reactions were all negative with the exception of the original hosts of tested fungi. 2. Inoculation to Picrasma ailanthoides Planch. : The appearance of symptom on the leaves of P. ailanthoides is not distinct, but more or less mycelial growth. Therefore, under the optimal condition in glass chamber, it may be possible to success artificially.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.549-553
• /
• 2010

Yeast strains with good sensory properties were selected, and those yeasts were subjected to mutation to develop high glutathione producing yeasts. In addition, the antiradical activity and flavoring effect of the yeast extract were evaluated. A total of 68 strains were screened, and three strains of Saccharomyces utilis, four strains of Candida utilis, and one strain of Zygosaccharomyces rouxii were selected based on the flavoring effect. Among them, a random mutation was elicited against SEM-Y8, resulting in a high flavoring effect and growth rate. The glutathione production by SEM-Y8 increased 2.0-fold following the mutation, and the DPPH radical quenching effect of the SY8-M2-1-derived extract increased 3.2-fold compared to that of the wild type. The sensory properties of the SY8-M2-1-derived extract were better than those of garlic or onion extract in umami and mouthfulness. Thus, the SY8-M2-1 extract could be used as a functional flavoring material with improved antiradical activity.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.343-350
• /
• 1981

The crystal and molecular structure of P-aminobenzaldehyde cyclohexylthiosemicarbazone, C14H20N4S, has been determined from 2712 integrated intensities measured on a computer controlled four circle diffractometer with monochromated $CuK_{\alpha}$, X-ray radiation. The crystals are monoclinic, space group C2/c with eight molecules in a unit cell of dimensions, a = 12.488(2), b = 12.276(4), c = 19.997(6)${\AA}$ and ${\beta}=103.55(3)^{\circ}$. The structure was solved by Patterson and Fourier method and refined by a full-matrix least squares method to a final R value of 0.058 for all reflections. The C(8)-S bond is trans to N(2)-N(3) and C(8)-N(1) is cis to N(2)-N(3) bond. The cyclohexane ring has chair conformation and makes an angle of $40.7^{\circ}$ with the benzene ring. The molecules are linked by N(2)H…S hydrogen bonds into dimer-like units which are held together by $N-H{\ldots}N$ hydrogen bonds. Sulfur accepts second rather weak hydrogen bond from N(4). An intramolecular hydrogen bond exists between N(1) and N(3) atoms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.103-115
• /
• 1998

Adhesion of composite resin to tooth structure has been of tremendous signgicance in clinical dentistry. Due to the lack of adhesion between composite restorative resins and enamel and dentin, microleakage occurs at the tooth/restoration interface. This may lead to discoloration, secondary caries, marginal breakdown, postoperative sensitivity, and even pulpal pathology. According to extensive use of composite resin, every effort on improving bonding strength and reducing microleakage between a tooth and composite resin has been continued. This study was conducted to determine the difference in microleakage in enamel and dentin treated with air-abrasion, acid etching and combination when restored with composite resin. Class V cavities were prepared on 30 premolars. The specimens were divided into following groups. group 1:air-abrasion+Scotchbond Multi-purpose group 4 :air-abrasion+All-Bond 2 group 2:acid etching+Scotchbond Multi-purpose group 5 :acid etching+All-Bond 2 group 3:combination+Scotchbond Multi-purpose group 6 :combination+All-Bond 2 #combination:air-abrasion + acid etching The specimens were filled with Z-100 after application of Scotchbond Multi-purpose and All-Bond 2. Thermocycling was conducted by alternately dipping the specimens in $5^{\circ}C$ and $55^{\circ}C$ water for 30 seconds 500 times. 1% methylene blue was applied and the specimens were left for 24 hours at $37^{\circ}C$. After washing out the dye, the tooth was sectioned buccolingually along the axis. The sectioned surface was observed with stereoscope for dye penetration. The author has measured the microleakage in teeth prepared with air-abrasion, acid ethching and combination to study the difference in microleakage following different methods of tooth surface treatment and has come to following results. 1. In comparing microleakage between groups, group 1 and 4 showed statistically significant difference from group 2, 3, 5 and 6(p<0.05). There was no significant difference among group 2, 3, 5, 6(p>0.05) nor between group 1 and 4(p>0.05). 2. In comparing microleakage among tooth surface treatment methods, Air-abrasion group showed significantly more microleakage than acid etching group and combination(airabrasion + acid etching) group(p<0.05). Combination(acid etching+air-abrasion)group tended to show lesser microleakage than acid etching group, but this was not statistically significant(p>0.05). 3. In comparing microleakage between bonding agents, there was no statistically significant difference between Scotch bond Multi-purpose and All-Bond 2(p>0.05).

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1062-1067
• /
• 2018

In this study, the research processed with a chemical sensor for measuring trace amount of heavy metal ions which is based on the requirements of the efficient sensing technology as recent equipment is applies molecular system in the chemical sensing section that can precisely recognizing selective target substance and transmit its data to physical signal as a result. In this research is concentrated on realize highly precise by utilizing SPR sensor application of recognition functional sensing membrane. Consequently, according to DTSQ-dye sensing membrane, the resonance angle from low-concentration to the highest concentration $10^{-4}M$ of $Ag^+$ ion is $2.17[^{\circ}]$ and this result indicating 4.3 times larger resonance angle changes compare to the other metal substance. Based on SQ-dye sensing membrane, the difference of resonance angle between low concentration and the highest concentration $10^{-4}M$ of $Cu^{2+}$ ion is $2.3[^{\circ}]$ and this outcome is indicating 4.5 times greater resonance angle change to the other metal substance.

• The Korean Journal of Franchise Management
• /
• v.11 no.2
• /
• pp.41-51
• /
• 2020

Purpose: Fast food franchise companies are trying a variety of innovative services to increase their competitiveness in response to changes in population composition in the fast food market and rapid changes in consumption trends due to technological development. From this point of view, franchise companies that have focused on offline store operations are providing O2O (offline to online) service as a core service for customer convenience. This new attempt is a strategy to increase loyalty by applying an interaction method based on understanding the characteristics of new generation consumers. However, existing studies are focused on the relationship between O2O service and acceptance, so very little is known about how O2O service affects customer loyalty. Therefore, this study examines the impacts of customer involvement and relative advantages of fast food O2O service on customer brand engagement (cognitive and affective engagement) and store loyalty for MZ(Millennials - Z) generations. Research design, data, and methodology: In order to achieve the purposes of this research, several hypotheses were developed. The data were collected from 247 questionnaires in their 16-30s and were analyzed using SPSS 22.0 and SmartPLS 3.0 program. Measurement model analysis was carried out to assess convergent and discriminant validity. Also, common method bias was tested using the values of VIF (variance inflation factor). The hypotheses was tested using structural equation modeling. Result: First, involvement has a positive effect on cognitive and affective engagement. Second, relative advantages have has a positive effect on cognitive and affective engagement. Third, cognitive influences affective engagement. Finally, both cognitive and affective engagement affect store loyalty, but affective engagement has a stronger effect on store loyalty than cognitive engagement. Conclusions: In the process of consumer-brand interaction, it was confirmed that store loyalty was influenced by cognitive and affective engagement sequentially. However, the results show that affective engagement has a relatively stronger on store loyalty than cognitive engagement. Therefore, it is necessary to establish an O2O service strategy to maintain long-term loyal customers by inducing cognitive participation with high-involved consumer, as well as affective interaction, in order to obtain new customers and increase customer loyalty.

• Journal of Forest and Environmental Science
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1983

The purpose of this study was to elucidate the ecophysiological habitat of natural Sorbus commixta forest at Mt. Seorak. The results obtained were as follows: 1. The Sorbus commixta trees mainly distributed from 900m to 1,500m altitude. In there, the warm index(WI) was about 42$3.2{\times}10^3$ to $9.2{\times}10^3$, cation exchange capacity(CEC) was 13.7 to 19.5mg/100g, N content 0.21 to 0.39%, $P_2O_5$ content was 22.6 to 38.7ppm, and pH value was 5.6 to 5.8 respectively. 4. The upper crown trees in Sorbus commixta communities were Abies nephrolepis, Taxus cuspidata, Betula platyphylla var. japonica, Quercus${\times}$grosseserrata, Acer mono, Prunus sargentii, Carpinus cordata, Tilia amurensis, and the under crown trees were Rhododendron brachycarpum, Acer pseudo-sieboldianum, Thuja olientalis, Corylus heterohpylla, Philadelphus schrenckii, Rhododendron schlippenbachii, Rhododendron mucronulatum, and Magnolia sieboldii. 5. The stand densities were 1,156 trees/ha at 1,160m and 3,600 trees/ha at 1,300m respectively. The coverages by the DBH basal area were 0.37 at 1,160m and 0.31 at 1,300m respectively, and the vegetation coverages by the crown projection area were 2.04 at 1,160m and 1.61 at 1,300m respectively. 6. The light extinction coefficient(k) in Beer-Lambert's law, showed the distance, F(z), from top canopy to aboveground, was 0.17. 7. The water relations parameters of Sorbus commixta shoot were obtained by the pressure chamber technique. The osmotic pressure, ${\pi}_o$, at maximum turgor was -16.2 bar, and VAT pressure was 14.5bar. The osmotic pressure, ${\pi}_p$, at incipient plasmolysis was -19.4bar. The relative water contents at incipient plasmolysis were 83.1% ($v_p/v_o$) and 87.1%($v_p/w_s$;$w_s$, total water at maximum turgor). 8. The bulk modulus of elasticity(E) of shoot was about 69.6. The total symplasmic water to total water in shoot was 67.7%, and the apoplastic water to total water was 32.3%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.193-202
• /
• 2016

Purpose: This study was performed in order to assess the effect of the surface treatment methods and the use of bonding agent on the shear bond strength (SBS) between the aged CAD-CAM (computer aided design-computer aided manufacturing) hybrid materials and added composite resin. Materials and methods: LAVA Ultimate (LU) and VITA ENAMIC (VE) specimens were age treated by submerging in a $37^{\circ}C$ water bath filled with artificial saliva (Xerova solution) for 30 days. The surface was ground with #220 SiC paper then the specimens were divided into 9 groups according to the combination of the surface treatment (no treatment, grinding, air abrasion with aluminum oxide, HF acid) and bonding agents (no bonding, Adper Single Bond 2, Single Bond Universal). Each group had 10 specimens. Specimens were repaired (added) using composite resin (Filtek Z250), then all the specimens were stored for 7 days in room temperature distilled water. SBS was measured and the fractured surfaces were observed with a scanning electron microscope (SEM). One-way ANOVA and Scheffe test were used for statistical analysis (${\alpha}=.05$). Results: Mostly groups with bonding agent treatment showed higher SBS than groups without bonding agent. Among the groups without bonding agent the groups with aluminum oxide treatment showed higher SBS. However there was no significant difference between groups except two subgroups within LU group, which revealed a significant increase of SBS when Single Bond Universal was used on the ground LU specimen. Conclusion: The use of bonding agent when repairing an aged LAVA Ultimate restoration is recommended.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.664-668
• /
• 2011

Spherical alumina precursors represented by $AlO_xCl_y(OH)_z$, 30~200 nm in particle diameter, were prepared by partial hydrolysis of $AlCl_3$ vapor in a 500 ml reactor. Investigated on the particle morphology and size were the effects of the reaction time, the stirring speed and the reaction temperature. The particle morphology and size was insensitive to the reaction time in the range 20 to 300 s. The variation of the stirring speed from 0 to 300 and 800 rpm showed that the particle size was the largest at 0 rpm. As the temperature was varied from 180 to 190, 200, $140^{\circ}C$, the particle size showed a maximum at $190^{\circ}C$. By calcination of the as-produced particles at $1,200^{\circ}C$ for 6h with a heating rate of $10^{\circ}C$/min, ${\alpha}$-alumina particles 45 nm in surface area equivalent diameter were obtained. The particle shape after calcination turned wormlike due to sintering between neighboring particles. A rapid calcination at $1400^{\circ}C$ for 0.5 h with a higher heating rate of $50^{\circ}C$/min reduced the sintering considerably. An addition of $SiCl_4$ or TMCTS(2,4,6,8-tetramethylcyclosiloxane) to the $AlCl_3$ reduced the sintering effectively in the calcination step; however, peaks of ${\gamma}$ or mullite phase appeared. An addition of $AlF_3$ to the particles obtained from the hydrolysis resulted in a hexagonal disc shaped alumina particles.