• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.3
• /
• pp.173-179
• /
• 2004

In this study, the influence of heat treatment and Ca contents on the electrochemical behavior was investigated. Mg-Ca alloys, i.e., Mg-0.22wt%Ca, Mg-0.56wt%Ca, Mg-1.31wt%Ca are prepared by ingot metallurgy. As-cast Mg-Ca alloys exhibited better electrochemical properties than pure Mg. Especially, Mg-0.22wt%Ca alloy improves its anode efficiency up to 62% and lowers the OCP up to -1.72VSCE. Microstructure and XRD patterns of Mg-Ca alloys show that additive Ca element is mainly solid-solutioned. While, the others show the microstructure and XRD pattern with large $Mg_2Ca$ at grain boundary. To assess the effect of heat treatment on the as-cast Mg-alloy, the specimens were heat treated at $200^{\circ}C$ for 2 hours under $CO_2$ gas atmosphere. Although corrosion properties of Mg-Ca alloys are somewhat deteriorated by heat treatment at $200^{\circ}C$ Mg-0.22wt%Ca alloy with uniformly distributed nano-sized $Mg_2Ca$ phase in ${\alpha}$-Mg matrix show still better corrosion properties than pure Mg specimen.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.91-99
• /
• 1995

One of alternative conventional technologies used for treatment of livestock wastes is composting process, and recently some mechanical composting processes are being practiced. It is, however, recognized the composting process also has its own limitations such as longer time requirement, and difficulties to estimate the degree of decomposition, etc. The incomplete compost contains potentially harmful materials to crops and public health due to instabilized organic contents and pathogenic organisms. The purpose of this investigation is to develop an innovative system whereby anxious livestock wastes are thoroughly stabilized and disinfected. Thus the overall management scheme should meet the following requirements. 1. A system should be in a cost-effective and environmentally sound manner. 2. Sludges must be chemically stabilized and bacteriologically safe. 3. Odor-free by product should be applied to crop land. 4. Sludges are sources of fertilizer nutrients and/or soil amendments to enhance crop production. 5. And they can be used as potential pH adjusting agent of the acidified soils. Overall effectiveness of the developed system is experimentally tested to satisfy the preset criteria and requirements. Major experiments are divided into four categories: they are 1. chemical stability test, 2. optimal condition test of stabilization process, 3. bacteriological examination and disinfection tests, and 4. deodorization tests The stabilization process is consisted of the stabilizing reaction process and the drying process. Stabilized wastes is dried by both sun dryer and rotary dryer. It is shown that an additive dosage of about g/kg solid in wastes with a minimum of 5-minutes reaction would be necessary for effective stabilization reaction. The stabilization process is consisted of the stabilizing reaction process and drying process. Stabilized wastes are dried by both sun dryer and rotary dryer. It is shown that an additive dosage of about 300g/kg solid in wastes with a minimum of 5-minutes reaction would be necessary for effective stabilization reaction. In the stabilization reaction process, the pH of wastes is lowered from initial values of 12.3 to 8.6. High pH prevents odor production and kills pathogenic organisms. Organic matter contents in the stabilized wastes are about 50% and the sum of contents of fertilizer elements such as total nitrogen, $P_2O_5$ and $K_2O$ are about 5.3%. The livestock wastes that are stabilized chemically and hygienically can be used as a good soil conditioner and/or organic fertilizer.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.

• Journal of Chest Surgery
• /
• v.25 no.12
• /
• pp.1391-1398
• /
• 1992

The hypothesis tested is that shifts in pH, induced when a cardioplegic solution is oxygenated, can be detrimental. The object of this study is to evaluate the effect of the pH of the oxygenating cardioplegic solution on postischemic recovery in the isolated rat heart. Either 100% oxygen or 95% oxygen: 5% carbon dioxide was added to the cardioplegic solution[St. Thomas` Hospital No. 2] and determined postischemic recovery of isolated rat hearts after 2 hours and 3 hours of 20oC cardioplegic protected ischemia. Heart were arrested and reinfused every 30 minutes throughout the ischemic period with cardioplegic solution. When 100% oxygen was added, the pH of the cardioplegic solution increased from 7.8[no oxygen] to 8.5[100% oxygen] without any change in postischemic functional recovery. But when 95% oxygen ; 5% carbon dioxide was added, the pH of the cardioplegic solution reversely decreased to 6.84 in the 2-hour ischemic group and 6.73 in the 3-hour ischemic group, associated with improved postischemic functional recovery. After 2-hour ischemia, systolic pressure improved from 88.2$\pm$3.7%[no oxygen] and 88.7$\pm$3.8%[100% oxygen] to 96.6$\pm$1.8%[95% oxygen : 5% carbon dioxide], p<0.05, aortic flow from 43.3$\pm$3.1% and 38.4$\pm$10.6% to 74.5$\pm$5.0%, p<0.001, cardiac output from 55.5$\pm$4.6% and 47.4%$\pm$10.6% to 73.1$\pm$4.6%, p<0.05, stroke volume from 62.7$\pm$4.6% and 52.0$\pm$10.1% to 77.2$\pm$4.6%, p<0.05, and dP/dT from 59.3$\pm$7.2% and 56.7$\pm$7.6% to 78.9$\pm$4.6%, p<0.05. The infused amount of the cardioplegic solution during 2-hour ischemic period was similar in three groups. After 3-hour ischemia, cardiac output improved from 17.0$\pm$3.8%[no oxygen] to 45.9$\pm$7.5%[95% oxygen: 5% carbon dioxide], p<0.05, and stroke volume from 21.0$\pm$3.9%[no oxygen] to 50.1$\pm$6.6%[95% oxygen: 5% carbon dioxide], p<0.01. In conclusion, the St. Thomas` Hospital No. 2 cardioplegic solution should be oxygenated but with 95% oxygen: 5% carbon dioxide and not 100% oxygen because of the additive effect of a relatively "Acidotic" pH.t; pH.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.178-183
• /
• 2002

Zinc fluosilicate ($ZnSiF_6$, 15% aqueous solution) was prepared using zinc oxide (ZnO) and fluosilicic acid ($H_2SiF_6$) by soluiton synthetic method. The fluidity and hydration properties of cement which was added $ZnSiF_6$ (aq.) as an additive for cement were studied. At water to cement ratio (W/C) equals to 0.45, the initial fluidity and slump loss of cement paste which the addition of $ZnSiF_6$ (aq.) was increased from 1.0% to 4.0% based on cement weight were investigated. Initial fluidity of cement paste was measured by mini-slump test and slump loss was examined by measuring the fluidity variation of cement paste with time elapsed from 0 min to 120 min at intervals 30 min. Also, the effect of $ZnSiF_6$ addition on the setting and hydration of cement paste when $ZnSiF_6$ increased in the addition range 1.0% to 3.0% were investigated. The fluidity of cement paste which was added 2.1% $ZnSiF_6$ (aq.) presented the highest value among all addition ranges. The setting time of cement paste was retarded gradually and the heat evolution of hydrated cement was reduced with the increasing of $ZnSiF_6$ addition.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.329-336
• /
• 1980

A domestic phosphogypsum was calcined in a batch type fluidized bed reactor at various reaction temperatures ranging 90∼180$^{\circ}$ without and with an alkaline additive amounting up to 5% of gypsum, and physical properties of the resultant products were compared following their characterization by X-ray diffraction pattern and DTA. It has been found that dehydration reactions were uniformly carried out in the fluidized bed reactor and only hemihydrate was obtained at 90$^{\circ}$ whereas at higher temperatures dehydration reaction progressed further. When gypsum was charged to the reactor preheated at over 140$^{\circ}$, a considerable degree of dehydration occurred before the reactant reached the initially set reactor temperature and in particular, at over 160$^{\circ}$ most of dehydration reaction was performed prior to the present reactor temperature. However, it has been found that gypsum mostly transforms into hemihydrate around the reactant temperature of 140$^{\circ}$ while transformation into anhydrite mostly occurs around $160^{\circ}C.$ When calcium hydroxide was added to gypsum in the reactor, the optimum physical properties of the calcined product were obtained at the weight ratio of $Ca(OH_2)/P_2O_5$ = 3.2.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.114-119
• /
• 2016

In this study, we tried to add the conductivity to natural polymer like bacterial cellulose (BC) coated with the conductive polymer PEDOT:PEG, graphene and silver nano-wire (AgNW). Sulfuric acid of 10 to 20% was previously mixed with PEDOT:PEG and then the solution was electron spin-coated on the BC membrane. And then, additive coating with graphene and AgNW were done to improve conductivity, which was examined by hall effect. As the result, we confirmed a considerable improvement of conductivity compared to BC-coated film without sulfuric acid treatment as $2.487{\times}10^{10}$ vs $8.093{\times}10^{15}$ ($1/cm^3$), showing higher electron density with $3.25{\times}10^5$ times. Also, we identified that changed particle type to the polymer type by sulfuric acid using SEM analysis. For FT-IR analysis, it was confirmed that S-O radical ($1200cm^{-1}$) increased in the sulfuric acid treatment than non-treated sulfuric acid. As the method used very small amount of PEDOT:PEG, its transparency could be kept, and pre-treatment process of sulfuric acid will be able to simplify the production process.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.3
• /
• pp.162-167
• /
• 1987

This experiment was conducted to determine the effect of the feeding value for the wild legumes silage-making with additives. The chopped Kudzu (Puerarie thunbergii Bentham) of wild legumes was ensiled by the conventional method in the small experimental silo of 2 liters. The additives used in the present experiments were water (8%),water (8%) plus corn starch (3%) and water (8%) plus glucose (3%). These additives as well as that of control without additive were set up and these silage were compared with the conventional corn silage. The fermentative qualities and the characteristic of fiber (neutral detergent fiber, NDF; acid detergent fiber, ADF; acid detergent lignin, ADL) of silage produced was determined by chemical analysis, and dry matter digestibility (DMD) was evaluated by pepsin-cellulase technique. The results obtained are summarized as follows: 1 The weight of Kudzu silage was lost under the 10% for all the treatments. 2 In degree of pH for the Kudzu silages with glucose, starch, control and water treatments were high 3.80,4.04,4.57 and 5.34, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.

• Toxicological Research
• /
• v.34 no.3
• /
• pp.211-220
• /
• 2018

Early life exposure to aflatoxin B1 (AFB1) and low protein diet through complementary foods during weaning is common in parts of Africa and Asia. This study evaluated the effect of co-exposure to AFB1 and low protein diet on the extrahepatic tissues of rats. Twenty-four three-week old weanling male albino rats were used for this study and were randomly assigned into four groups: group 1 served as control and was fed normal protein diet (20% protein), group 2 was fed low protein diet (5% protein), group 3 was fed normal protein diet + 40 ppb AFB1 while group 4 received low protein diet + 40 ppb AFB1, all for eight weeks. Afterward, biomarkers of anemia (packed cell volume (PCV), hemoglobin) and kidney function (urea, uric acid, and creatinine) were determined in the blood while biomarkers of oxidative stress were determined in the tissues spectrophotometrically. Co-exposure to AFB1 and low protein diet significantly (p < 0.05) decreased body weight gain and PCV, increased biomarkers of kidney functions and induced oxidative stress in the tissues studied. There was significant (p < 0.05) reduction in glutathione concentration while TBARS was significantly increased in the tissues. Co-exposure to AFB1 and low protein diet had additive effects on decreasing the weight gain and potentiation effect of kidney dysfunction in the rats. The co-exposure also decreased antioxidant enzymes and increased oxidant status in the tissues. Our results demonstrate that this co-exposure has deleterious health effects on extrahepatic tissues and should be a public health concern especially in developing countries where AFB1 contamination is common.