• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.33-38
• /
• 2009

AIN 소결에 있어서 ${Y_2}{O_3}$를 소결 조제로하여 $1,700{\sim}1,900^{\circ}C$의 온도에서 상압소결하엿을 때 ${Y_2}{O_3}$ 첨가와 소결 유지 시간이 소결 특성, 미세 구조 및 열전도도에 미치는 영향에 관하여 평가하였다. ${Y_2}{O_3}$의 첨가에 따라 AIN 시편은 치밀화가 증진되고 열전도도가 증가됨을 확인할 수 있었다. 이러한 결과는 AIN 분말 표면의 ${Al_2}{O_3}$와 ${Y_2}{O_3}$의 반응으로 형성된 이차상에 기인한 것으로, 첨가된 ${Y_2}{O_3}$는 ${Al_2}{O_3}$와의 반응으로 치밀화에 기여를 하여 고온에서 액상의 형성으로 급속히 치밀화를 증진시키며, AIN 결정격자 내부로 유입될 수 있는 산소의 양을 감소시킴으로써 AIN 시편의 열전도도를 증가시키는 것을 알 수 있었다. 또한 소결시간의 증가에 따라 열전도도는 급격히 증가하였는데 이는 결정립계의 이차상이 고온에서 휘발되어 그 양이 감소함에 기인하는 것으로 파악되었다. $1,900^{\circ}C$ 5시간 소결한 시편의 열전도도는 약 $141\;Wm^{-1}K^{-1}$ 값을 나타내었고 이는 1시간 소결한 시편과 비교하여 20% 이상 증가된 값이었다.

• 한국자기학회지
• /
• 제9권3호
• /
• pp.149-153
• /
• 1999

SiO2-CaO-V2O5 3원계 첨가물을 함유한 Mn-Zn 페라이트 저손실의 주파수 및 온도 의존성에 대해 조사하고 주된 자기손실기구에 대해 고찰하였다. 연쇄고온합성법에 의해 MnO:ZnO:FeO=36:11:53mol% 조성의 페라이트를 제조하였다. 자기손실의 주파수 의존 결과로부터 저주파에서는 자기이력손실이 고주파에서는 와전류손실이 지배적임을 제시하였고, 고저항 첨가제에 의해 비저항이증가할수록 자기이력손실이 감소하였다. 순수 Mn-Zn 페라이트의 경우 자기 손실은 온도 증가에 따라 증가하였으나, 입계저항제가 첨가된 시편의 경우 와전류손실의 감소로 약 4$0^{\circ}C$에 서 자기손실의 최소치가 나타났다.

• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.667-674
• /
• 2000

The stability of ZnO-Pr$_{6}$/O$_{11}$-CoO-Er$_{2}$/O$_3$based varistors was investigated with Er$_{2}$/O$_3$additive content of the range 0.0 to 2.0 mol%. All varistors sintered at 130$0^{\circ}C$ exhibited the thermal runaway within short times even under weak d.c. stress. As a result these varistors were completely degraded. On the contrary the stability of varistors sintered at 135$0^{\circ}C$ was far better than that of 130$0^{\circ}C$. In particular the varistors added with 0.5mol% Er$_{2}$/O$_3$ which the nonlinear exponent is 34.83 and the leakage current is 7.38 $mutextrm{A}$ showed a excellent stability which the variation rate of the varistors voltage the nonlinear coefficient and the leakage current is below 1%, 2%, and 3.5% respectively even under more severe d.c. stress such as (0.80 V$_{1mA}$9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$/12h)+(0.90 V$_{1mA}$12$0^{\circ}C$12h) Consequently it is estimated that the ZnO-0.5 mol% Pr$_{6}$/O sub 11/-1.0 mol% CoO-0.5 mol% Er$_{2}$/O sub 3/ based varistors will be used to develop the advanced Pr$_{6}$/O$_{11}$-1.0 mol% CoO-0.5 mol% Er$_{2}$/O$_{3}$ based varistors will be used to develop the advanced Pr$_{6}$/O$_{11}$-based ZnO varistors having the high performance and stability in future. future.ure. future.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.457-460
• /
• 2010

$SmCoO_3$ system was investigated for their application to themoelectric materials. All specimens showed p-type semiconducting behavior and their electrical conductivity ($\sigma$), Seebeck coefficient (S) and power factor were measured at high temperature. And the effect of dopant ions on their thermoelectrical properties were also investigated. $Fe^{3+}$ ion doped into $Co^{3+}$ site enhanced the Seebeck coefficient and decreased the electrical conductivity simultaneously. The maximum Seebeck coefficient value for 60% doping case reached to 780 ${\mu}V$/K at $240^{\circ}C$. However $Fe^{3+}$ doped system cause an negative effect on power factor value. In case of the pure phase, the maximum Seebeck coefficient value reached to 290 ${\mu}V$/K at $240^{\circ}C$ and the maximum electrical conductivity was obtained 748 1/(ohm$\times$cm) at $960^{\circ}C$. As a result, the maximum power factor was obtained $1.49\times10^{-4}$ W/$mK^2$ at $550^{\circ}C$.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.245-250
• /
• 2007

This study was focused on the effect of sintering additive and particle size on the low temperature sintering of $0.85CaWO_4-0.15SmNbO_4$ ceramics. With an increase of $CaV_2O_6$ content, the sintering temperature of the specimens was reduced from $1150^{\circ}C\;to\;800^{\circ}C$. The dielectric constant (K) and Qf value were increased with $CaV_2O_6$ content. These results are due to the enhancement of the density by the liquid phase sintering. Temperature coefficient of resonant frequency (TCF) was slightly shifted to the positive value with $CaV_2O_6$ content. Typically, K of 12.64, Qf of 23,106 GHz, TCF of $-34ppm/^{\circ}C$ were obtained for the specimens with 7 wt.% $CaV_2O_6$ sintered at $900^{\circ}C$ for 3 h.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.59-62
• /
• 1996

The effect of NiO addition on the microstructure and microwave dielectric properties of (Zr$_{0.8}$Sn$_{0.2}$)TiO$_4$(ZST) was investigated. With the NiO addition, a dense ZST body of density higher than 95% has been achieved in the sintering temperature range of 1400 to 150$0^{\circ}C$. Energy dispersive X-ray spectrometry (EDS) analysis of sintered specimen shows the presence of second phase at grain boundaries, which is considered to be NiTiO$_3$. Dielectric constant of the specimen is found to increase linearly with density. Q-values and TC$_{f}$decrease with increasing NiO content. The variation of dielectric properties with NiO content is discussed in term of the second phase. The ZST ceramics with small amount of additive gave $\varepsilon$$_{r}$=38, Q=7000 at 7 GHz and TC$_{f}$=-0.5 ppm/$^{\circ}C$, comparable with the values obtained by previous investigation.stigation.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.384-389
• /
• 2011

Gas pressure sintering (GPS) of reaction bonded silicon nitride (RBSN) was performed using $Lu_2O_3-SiO_2$ additive and the properties were compared with those of specimens prepared using high purity $Si_3N_4$ powder. The relative density of RBSN and compacted $Si_3N_4$ powder were 68.9 and 47.1%, and total linear shrinkage after sintering at $1900^{\circ}C$ were 14.8 and 42.9%, respectively. High nitrogen partial pressure (5MPa) was required during sintering at $1900^{\circ}C$ in order to prevent the decomposition of the nitride and to promote the formation of SiC. The relative density and 4-point bending strength of RBSN and $Si_3N_4$ powder compact were 97.7%, 954MPa and 98.2%, 792MPa, respectively, after sintering at $1900^{\circ}C$. The sintered RBSN also showed high fracture toughness of 9.2MPam$^{1/2}$.

• 한국재료학회지
• /
• 제7권1호
• /
• pp.81-88
• /
• 1997

유리 형성제로 $B_{2}O_{3}$를 사용하고 CuO를 첨가한 vanadate계 3성분계 유리의 전기적 특성을 조사하였다. 각 조성별 결정화온도에서 열처리 시간을 다르게 하여 생성되는 결정상을 조사 하였으며, 결정화 특성에 따른 직류 전기 전도도의 변화를 분헉하였다. 생성 결정물은 XRD 분석결과 $V_{2}O_{5},\;{\alpha}-CuV_{2}O_{6}$로 판명 되었으며, 열처리 시간에 따라 $V_{2}O_{5}\;와\;{\beta}-CuV_{2}O_6$의 결정화도는 별다른 변화가 없었으나 ${\alpha}-CuV_{2}O_{6}$의 결정화도는 크게 변화하였고 ${\alpha}-CuV_{2}O_{6}$의 결정화도 증가에 따라 전기 전도도가 증가 하였다. 전기 전도도는 상온(303K)에서 유리 조성을 변화시켜 $10^{-2}~-10^{-4}{\Omega}^{-1}cm^{-1}$ 범위로 조절될수 있었다. $V_{2}O_{5}$ 함량이 증가할수록, 염기도($CuO/B_{2}O_{3}$)가 감소할수록 전기 전도도가 증가 하였다. 이 유리의 charge carrier는 전자인 n-type 반도체임이 seebeck coefficient 측정결과 판명되었으며, 전자 전도에 대한 활성화 에너지는 0.098-0.124eV로 계산되어졌다. 측정 온도인 $30~200^{\circ}C$에서 small polaron hopping conduction이 발생함이 관찰되었고, variable range hopping은 보이지 않았다.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.307-312
• /
• 2018

Liquid phases in ZnO varistors cause more complex phase development and microstructure, which makes the control of electrical properties and reliability more difficult. Therefore, we have investigated 2 mol% $CaCO_3$ doped $ZnO-Co_3O_4-Cr_2O_3-La_2O_3$ (ZCCLCa) bulk ceramics as one of the compositions without liquid phase sintering additive. The results were as follows: when $CaCO_3$ is added to ZCCLCa ($644{\Omega}cm$) acting as a simple ohmic resistor, CaO does not form a secondary phase with ZnO but is mostly distributed in the grain boundary and has excellent varistor characteristics (high nonlinear coefficient ${\alpha}=78$, low leakage current of $0.06{\mu}A/cm^2$, and high insulation resistance of $1{\times}10^{11}{\Omega}cm$). The main defects $Zn_i^{{\cdot}{\cdot}}$ (AS: 0.16 eV, IS & MS: 0.20 eV) and $V_o^{\bullet}$ (AS: 0.29 eV, IS & MS: 0.37 eV) were found, and the grain boundaries had 1.1 eV with electrically single grain boundary. The resistance of each defect and grain boundary decreases exponentially with increasing the measurement temperature. However, the capacitance (0.2 nF) of the grain boundary was ~1/10 lower than that of the two defects (~3.8 nF, ~2.2 nF) and showed a tendency to decrease as the measurement temperature increased. Therefore, ZCCLCa varistors have high sintering temperature of $1,200^{\circ}C$ due to lack of liquid phase additives, but excellent varistor characteristics are exhibited, which means ZCCLCa is a good candidate for realizing chip type or disc type commercial varistor products with excellent performance.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.99-107
• /
• 2000

In this study several P type and N type ceramic semiconductors were prepared by atomic valence control and their electric resistivities were investigated with various concentrations of additive impurities. N-P junctions were made by thin film printing method and their varistor-like characteristics were investigated and their availability was discussed. The results are followings, 1) Some N type semiconductors with a proper concentration of additive impurity have minimum resistivities. 2) The N-P junction samples with ZnO as a constituent material of N type semiconductor have linearity in voltage-current characteristics, but the other N-P junction samples have the non-linearity, 3) Some N-P junction samples showed the good varistor-like characteristics.