• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.47-54
• /
• 1986

Since the wall mobility of bubble magnetic materials havin g the large q (q=Kac/2$\pi$$M_s^2$) like a $YFeO_3$ has been found to be proportional to the wall energy theoretically crystallographical direction dependence of wall energy calculated by the basis on the spin configuration of the bubble wall which lies in the ac plane was compared with the crystallographical direction dependence of wall mobility which was measured by the experiment. The sample was a single crystal of $YFeO_3$ which was cut into plate normal to the C axis and polished t a thickness of about 60${\mu}{\textrm}{m}$ The measurement of the wall mobility was carried out by optical system using the magneto-optic Faraday effect. From the good agreement of the crystallographical direction dependence of wall mobility and will energy it was found that the spin configuration of the bubble wall suggested is fair.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 임시총회 및 하계학술연구발표회
• /
• pp.85-85
• /
• 2014

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 임시총회 및 하계학술연구발표회
• /
• pp.84-84
• /
• 2014

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 자성 및 자성재료 국제학술대회
• /
• pp.103-103
• /
• 2014

• 한국재료학회지
• /
• 제6권3호
• /
• pp.275-281
• /
• 1996

YIG 전구체 분말은 요소의 열분해반응을 이용한 균일침전법에 의해서 질산염으로부터 제조하였다. 침전은 철이온이 먼저 침전한 후 이트륨이온이 침전하는 과정으로 이루어졌다. YGI전구체 분말은 철산화물과 비정질로 구성되어 있으며 그 분말의 대략적인 화학식은 2.5Fe2O3.Y3(OH)9-2x(CO3)x.nH2O로 되어있다. YIG 전구체 분말의 열분해과정은 dehydration, 철산화물의 recrystallization, yttrium carbonate 및 yttrium oxide의 형성과 고상반응등 여러단계로 구성되어 있다. 열처리온도가 증가함에 따라 Y2O3와 Fe2O3의 고상반응에 의해 YFeO3 intermediate을 경유해서 YIG상이 형성됨을 확인하였다. 단일상의 YIG는 120$0^{\circ}C$에서 6시간 공기중에서 소성함에 의해서 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1015-1022
• /
• 1993

The formation process of polycrystalline YIG(Y3Fe5O12) prepared by conventional method in Fe2O3-Y2O3 system was investigated. Effect of the microstructure of sintered body on electromagnetic properties was also investigated. Orthoferrite (YFeO3) was formed between 900 and 110$0^{\circ}C$. Formation of YIG phase begin at 110$0^{\circ}C$ with sharp increased saturation magnetization simultaneously. YIG phase is identified as single phase above 120$0^{\circ}C$. The microstructures and electromagnetic properties of sintered bodies are varied due to calcination condition of starting materials. The sintered YIG of calcined sample at 110$0^{\circ}C$ has such magnetic properties as Bs=1580G, BHC=1.89Oe, Tc=570K, ΔH(9.3GHz)=78Oe.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.693-699
• /
• 1996

YIG precursor powder was obtained by homogeneous precipitation in chloride salt solution by thermal decom-position of urea. It was found that ferric ions precipitated prior to yttrium ions. The precipitate was minute and spherical in shape. The precipitate formed consisted of the mixture of amorphous and ferric oxyhydroxide. Crystallization of YIG was proceeded by solid state reaction of intermediate YFeO3 and Fe2O3 in the temperature range of 85$0^{\circ}C$ to 140$0^{\circ}C$. Single phase of YIG was obtained by heat-treatment of the powder at 140$0^{\circ}C$ for 6 hrs in air. The powder calcined was molded into pellets and sintered in air. The maximum density of 4,92 g/cm3(95.1% of theoretical density) was obtainable for the pellet sintered at 145$0^{\circ}C$ using the powder calcined at 90$0^{\circ}C$.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.46-51
• /
• 2015

A precipitation behavior of nano-oxide particle in Fe-$5Y_2O_3$ alloy powders is studied. The mechanically alloyed Fe-$5Y_2O_3$ powders are pressed at $750^{\circ}C$ for 1h, $850^{\circ}C$ for 1h and $1150^{\circ}C$ for 1h, respectively. The results of Xray diffraction pattern analysis indicate that the $Y_2O_3$ diffraction peak disappear after mechanically alloying process, but $Y_2O_3$ and $YFe_2O_4$ complex oxide precipitates peak are observed in the powders pressed at $1150^{\circ}C$. The differential scanning calorimetry study results reveal that the formation of precipitates occur at around $1054^{\circ}C$. Based on the transmission electron microscopy analysis result, the oxide particles with a composition of Y-Fe-O are found in the Fe-$5Y_2O_3$ alloy powders pressed at 1150oC. It is thus conclude that the mechanically alloyed Fe-$5Y_2O_3$ powders have no precipitates and the oxide particles in the powders are formed by a high temperature heat-treatment.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.1-1
• /
• 1992

YIG는 분해용융을 하므로 FZ법을 개량한 TSFZ법을 적용하여 YIG단결정을 성장시켰다. 최적성장조건은 성장속도 1mm/hr, 상호역방향 회전속도 30rpm이었으며 소결 및 결정성장시 산화분위기를 필요로 하였고 성장된 결정의 질은 소결정도에 의해 많은 영향을 받았다. Melt내 기포의 생성은 철이온과 산소와의 반응에 의해 발생되었으며 기포의 밀도는 성장속도가 빨라질수록 증가하였다. 성장속도는 1mm/hr 이상일 경우에는 Cell Growth가 발생하였으며 결정의 가장자리에서 전위밀도가 증가하였다. 또한 성장된 결정에서는 제2상으로 Orthoferrite가 관찰되었다.