• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 학술대회지
• /
• pp.20-20
• /
• 2003

• 공업화학
• /
• 제9권7호
• /
• pp.1011-1017
• /
• 1998

$YBa_2Cu_3O_{6+x}(Y123)-Ag$ 초전도 선재를 0/20 wt%의 은(Ag)을 첨가한 발화합성분말과 고상반응분말을 사용하여 플라스틱 압출법으로 제조하였다. 플라스틱 압출법은 분말제조, 플라스틱 paste 제조, 다이 압축, binder 소각 및 소결공정을 포함한다. 양질의 초전도체를 제조하려면 원료물질이 균질하고 미세한 분말이어야 한다. 0/20 wt%를 첨가한 $Y_2O_3-BaCO_3-CuO$ precursor 분말을 발화합성(PS)법과 고상반응(MM)법으로 제조하였다. 원료분말이 Y123 초전도상으로 전이되는 생성속도를 공기중에서 여러온도와 시간별로 반응시켜 알아보았다. 발화합성법으로 제조한 분말이 고상반응법으로 제조한 분말보다 Y123상으로 빠르게 전이되었다. 이것은 PS법으로 제조한 분말이 미세한 크기와 균질한 화학적 조성으로 인해 Y123상으로 빠른 전이를 한 것이기 때문이다. 플라스틱 압출법으로 제조한 Y123-Ag 초전도 선재의 임계전류밀도($J_c$)는 원료분말의 특징에 따라 $150{\sim}230A/cm^2$값을 나타내었다. 은을 20 wt.% 첨가한 발화합성분말로 제조한 선재의 $J_c$는 $230A/cm^2$이었다.

• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.65-70
• /
• 2001

$Pb/Bi_2Sr_2CaCu_2O_{8+\delta}$-single-crystal junctions with the tunneling direction along the c axis of the crystal were fabricated to obtain an s-wave-superconductor/d-wave-superconductor Josephson junctions. The tunneling R (T) curves and current-voltage characteristics show distinct features which can be explained only under the assumption that the order parameter of high-$T_c/Bi_2Sr_2CaCu_2O_{8+{\delta}}$ superconductors has a pure d-wave symmetry, which is in contrast to the case of $YBa_2Cu_3O_{7+{\delta$}}$erconductors where a minor s-wave component is also present..

• 한국재료학회지
• /
• 제1권2호
• /
• pp.93-98
• /
• 1991

The as-grown $YBa_2Cu_3O_{7-x}$ superconducting thin films on MgO(100) substrate have been prepared by a reactive coevaporation method. The superconducting transition temperature, surface morphology and crystalline quality were examined as a function of the substrate temperature ranging from $450^{\circ}C$ to $590^{\circ}C$. From the reflection high energy electron diffraction (RHEED) analysis, it was found the film consisted of almost amorphous phase with a halo pattern deposited at the substrate temperature of $450^{\circ}C$. The film deposited at the substrate temperature of $510^{\circ}C$ consisted of polycrystalline phase, showing a broad ring pattern. On the other hand, for the film deposited at $590^{\circ}C$, RHEED showed spotty pattern indicating that this film consisted of single crystal phase. It has rough film surface due to the surface outgrowth. The surface outgrowth increased as the substrate temperature increased from $510^{\circ}C$ to $590^{\circ}C$. the surface outgrowth may be due to the anisotropic growth rate. The highest transition temperature obtained in this study was $Tc_{zero}$ of 83K with $Tc_{onset}$ of 88K for the film deposited at $590^{\circ}C$ using activated RF oxygen plasma.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.51-51
• /
• 2009

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.7-7
• /
• 2004

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.137-143
• /
• 2003

In measuring the microwave surface resistance of high-Tc superconductor (HTS) films using the dielectric-loaded cavity resonator method, one of the most important factors that limit the measurement sensitivity is the measurement error in the loss tangent ($tan\delta$) of the dielectric rod placed inside the cavity. We have measured the effective surface resistance ( $R_{S}$ $^{eff}$) of$ YBa_2$$_Cu3$$_{7-{\delta}}$ (YBCO) films and the $tan\delta$ of rutile ($TiO_2$) using the 'two-tone'method suggested by Kobayashi et at. [IEEE, MTT-S Digest, 495, (2001)], which enables simultaneous measurements of both the $R_{S}$ $^{eff}$ fof HTS films and the $tan\delta$ of the rutile with high sensitivity. A rutile-loaded cavity resonator with the $TE_{012}$ and $TE_{021}$ resonant frequencies at 13.67 - 14.01 GHz is used for this purpose. At temperatures where the two modes do not couple with other modes, the $R_{S}$ $^{eff}$ of YBCO films and $tan\delta$ of rutile measured by the two-tone method appear to match well with the corresponding values measured using the reported $tan\delta$ values of sapphire within 10 %. Usefulness of the 'two-tone' method for microwave characterization of HTS films and dielectrics is discussed.d.ielectrics is discussed.ussed.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.2-2
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• 제13권4호
• /
• pp.425-428
• /
• 1992

Sodium substituted samples of $Y_{1-x}Na_xBa_2Cu_3O_{7-y}$ for $0.00{\leq}x{\leq}0.16$ were prepared and characterized by X-ray powder pattern, electrical resistivity and magnetic susceptibility measurements, Raman spectroscopy, and idometric titration. The Na substituted compounds have narrow solid solution limits where $0.00{\leq}x{\leq}0.16.$ As the Na concentration increases, the parent orthorhombic structure tends to gradually change to tetragonal. Small changes in the superconducting transition temperature, Tc, are observed in this solid solution region. Raman spectra for the Na phases are virtually identical with that of $YBa_2Cu_3O_7$ except that the Cu(1)-O(4) stretching mode at 504 $cm^{-1}$ and the Cu(2)-O(2,3) bending mode at 340 $cm^{-1}$ for x = 0.16 are slightly shifted. The hole concentrations of the sodium substituted compounds ranged from 0.31 to 0.33 per Cu site are increased with Na content. The substitution of $Na^+$ for $Y^{3+}$ site appears to create oxygen vacancies in the Cu-O chains, causes structural change from orthorhombic to tetragonal, and increases hole concentration in the substituted system.

• E2M - 전기 전자와 첨단 소재
• /
• 제3권1호
• /
• pp.52-58
• /
• 1990

YBa$_{2}$ Cu$_{3}$O$_{7-{\delta}}$의 Ba대신 K를 일부 치환시킨 Y(Ba$_{1-x}$ , $K_{x}$ )$_{2}$Cu$_{3}$O$_{y}$ 에서 x의 값에 따른 초전도 특성의 변화를 연구하였다. XRD 무늬와 Infrared의 투과율로써 상의 변화를 관측하고 온도에 따른 전기저항의 변화를 측정함으로써 초전도성을 조사하였다. Ba 대신 K의 양이 증가할수록 Y(Ba$_{1-x}$ ,K$_{x}$)$_{2}$Cu$_{3}$O$_{y}$ 는 다중상이 되어 갔고 전기저항이 0이 되는 T$_{c}$는 점점 더 낮은 온도로 이동하다가 x.geq.0.6이 되면 초전도 특성을 잃었다.을 잃었다..