• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.218-218
• /
• 2012

Recently, hexagonal manganites have attracted much attention because of the coexistence of ferroelectricity and antiferromagnetic (AFM) order. The crystal structure of hexagonal manganites consists of $MnO_5$ polyhedra in which $Mn^{3+}$ ion is surrounded by three oxygen atoms in plane and two apical oxygen ions. The Mn ions within Mn-O plane form a triangular lattice and couple the spins through the AFM superexchange interaction. Due to incomplete AFM coupling between neighboring Mn ions in the triangular lattice, the system forms a geometrically-frustrated magnetic state. Among hexagonal manganites, $YMnO_3$, in particular, is the best known experimentally since the f states are empty. In addition, for applications, $YMnO_3$ thin films have been known as promising candidates for non-volatile ferroelectric random access memories. However, $YMnO_3$ has low magnetic order temperature (~70 K) and A-type AFM structure, which hinders its applications. We have synthesized $YMn1_{-x}Cr_xO_3$ (x = 0, 0.05 and 0.1) samples by the conventional solid-state reaction. The powders of stoichiometric proportions were mixed, and calcined at $900^{\circ}C$ for $YMn1_{-x}Cr_xO_3$ for 24 h. The obtained powders were ground, and pressed into 5-mm-thick disks of 1/2-inch diameter. The disks were directly put into the oven, and heated up to $1,300^{\circ}C$ and sintered in air for 24 h. The phase of samples was checked at room temperature by powder x-ray diffraction using a Rigaku Miniflex diffractometer with Cu $K{\alpha}$ radiation. All the magnetization measurements were carried out with a superconducting quantum-interference-device magnetometer. Our experiments point out that the Cr-doped samples show the characteristics of a spin-glass state at low temperatures.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1996년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1996

Ceramic based nanocomposite, in which nano-sized ceramics and metals were dispersed within matrix grains and/or at grain boundaries, were successfully fabricated in the ceramic/cerarnic and ceramic/metal composite systems such as $Al_2O_3$/SiC, $Al_2O_3$/$Si_3N_4$, MgO/SiC, mullite/SiC, $Si_3N_4/SiC, $Si_3N_4$/B, $Al_2O_3$/W, $Al_2O_3$/Mo, $Al_2O_3$/Ni and $ZrO_2$/Mo systems. In these systems, the ceramiclceramic composites were fabricated from homogeneously mixed powders, powders with thin coatings of the second phases and amorphous precursor composite powders by usual powder metallurgical methods. The ceramiclmetal nanocomposites were prepared by combination of H2 reduction of metal oxides in the early stage of sinterings and usual powder metallurgical processes. The transmission electron microscopic observation for the $Al_2O_3$/SiC nanocomposite indicated that the second phases less than 70nm were mainly located within matrix grains and the larger particles were dispersed at the grain boundaries. The similar observation was also identified for other cerarnic/ceramic and ceramiclmetal nanocornposites. The striking findings in these nanocomposites were that mechanical properties were significantly improved by the nano-sized dispersion from 5 to 10 vol% even at high temperatures. For example, the improvement in hcture strength by 2 to 5 times and in creep resistance by 2 to 4 orders was observed not only for the ceramidceramic nanocomposites but also for the ceramiclmetal nanocomposites with only 5~01%se cond phase. The newly developed silicon nitride/boron nitride nanocomposites, in which nano-sized hexagonal BN particulates with low Young's modulus and fracture strength were dispersed mainly within matrix grains, gave also the strong improvement in fracture strength and thermal shock fracture resistance. In presentation, the process-rnicro/nanostructure-properties relationship will be presented in detail. The special emphasis will be placed on the understanding of the roles of nano-sized dispersions on mechanical properties.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.305-309
• /
• 2023

This study aims to prepare a colloidal silica-containing powder to enhance the solubility and dissolution rate of rivaroxaban using a self-nanoemulsifying drug delivery system (SNEDDS). We investigate the impact of colloidal silica on a nanoemulsion system for preparing powdered SNEDDS. The liquid SNEDDS comprises 30/20/50 (w/w/w) Peceol/Cremophor RH40/Tween 80, which results in the formation of the smallest droplets. Three powdered SNEDDS formulations are prepared by suspending the liquid SNEDDS formulation using colloidal silica and spray drying. The powdered SNEDDS prepared with liquid SNEDDS and colloidal silica at a ratio of 1/0.5 (w/w) exhibits the highest water solubility (0.94 ± 0.62 vs. 26.70 ± 1.81 ㎍/mL) and dissolution rate (38.4 ± 3.6 vs. 85.5 ± 3.4%, 45 min) when compared to the drug alone. Morphologically, the liquid SNEDDS is adsorbed onto colloidal silica and forms smaller particles. In conclusion, an SNEDDS containing rivaroxaban, prepared using colloidal silica, facilitates the creation of a nanoemulsion and enhances the water solubility of rivaroxaban. Accordingly, this technology holds significant potential for commercialization.

• 한국분말재료학회지
• /
• 제16권4호
• /
• pp.268-274
• /
• 2009

For the purpose of obtaining basic information on the development of lead-free materials, a high density composites (a) W-Cu, (b) W-Sn (c)W-Cu-Sn and (d) W-Cu-Ni were fabricated by the P/M method. The particle size of used metal powders were under 325 mesh, inner size of compaction mould was $\phi8$ mm, and compaction pressure was 400 MPa. A High density composite samples were sintered at a temperature between $140^{\circ}C$ and $1050^{\circ}C$ for 1 hour under Ar atmosphere. The microstructure, phase transformation and physical properties of the sintered samples were investigated. As the results, the highest relative density of 95.86% (10.87 g/$cm^3$) was obtained particularly in the sintered W-Cu-Sn ternary system sample sintered at 450 for 1hr. And, Rockwell hardness (HRB) of 70.0 was obtained in this system.

• 한국식품저장유통학회지
• /
• 제14권3호
• /
• pp.281-287
• /
• 2007

파프리카 분말을 스폰지 케이크 제조에 이용하고자 동결 건조된 두 가지 파프리카 분말을 밀가루 배합비에 2, 4 및 6%의 비율로 첨가하여 반죽의 비중과 점도 및 그에 따른 최종 케이크 품질, 물리적 및 관능적 특성을 조사하였다. 이들의 결과에서 품종이 다른 두 종류의 파프리카 분말의 첨가 비율이 증가함에 따라 케이크 반죽 비중 및 점도는 증가하였고, 케이크의 부피와 높이는 오히려 감소하는 경향을 나타내었다. 색상은 파프리카 분말의 첨가에 따라 표면과 내부의 색깔을 모두 어둡게 하였으며, 조직감은 파프리카 분말의 첨가량의 증가에 따라 경도가 증가하였다. 파프리카의 품종이 스폰지 케이크의 관능검사에 미치는 영향에서는 파프리카 분말 4% 첨가구가 파프리카 분말을 첨가하지 않은 대조구에 비하여 높은 기호도를 나타내었다.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.259-263
• /
• 2012

Dependence of the freeze-drying process condition on microstructure of porous W and pore formation mechanism were studied. Camphene slurries with $WO_3$ contents of 10 vol% were prepared by milling at $50^{\circ}C$ with a small amount of dispersant. Freezing of a slurry was done in Teflon cylinder attached to a copper bottom plate cooled at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $800^{\circ}C$ for 30 min, and sintered in the furnace at $900^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $WO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $70{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores with dendritic structure due to the growth of camphene dendrite depending on the degree of nucleation and powder rearrangement in the slurry.

• 센서학회지
• /
• 제17권5호
• /
• pp.361-368
• /
• 2008

Nanosized $SnO_2$ particles were synthesized by homogeneous precipitation method using tin chloride ($SnCl_4{\cdot}5H_{2}O$) and urea ($CO(NH_2)_2$). The powders were heated at $500^{\circ}C$ and $600^{\circ}C$ for 2h. The crystal structure, microstructure, thermal behavior, specific surface area were analyzed using XRD, FE-SEM, TGA and BET, respectively. The initial resistance and the $H_2$ sensing properties were measured as a function of ${Sb_2}{O_3}$ and Pd doping concentrations. The resistance was decreased with the addition of ${Sb_2}{O_3}$ and the sensitivity for $H_2$ gas was increased with the addition of Pd. Thus, the optimum $H_2$ gas sensing property was obtained in the 0.25.mol% ${Sb_2}{O_3}$ and 1.w% added $SnO_2$ powders.

• Journal of Nutrition and Health
• /
• 제34권3호
• /
• pp.285-298
• /
• 2001

The effects of dried leaf powders and water and ethanol extracts of persimmon and green tea on lipid metabolism, lipid peroxidation and antioxidative enzyme activity were investigated in 12-month-old rats. Forty-nine male Sprague-Dawley rats weighing 520$\pm$19g were blocked into seven groups according to body weight. Rats were raised for four weeks with control(no tea leaf powder or extracts) and experimental diets containing either 5%(w/w) dried leaf powders of persimmon(Diospyros kaki Thunb) or green tea(Camellia sinensis O. Ktze), or water or ethanol extract from equal amounts of each dried tea powder. Food intakes of all tea diet groups were higher than that of control. Weight gains and food efficiency ratios of all tea diet groups were not significantly different from those of control. All tea diets decreased plasma triglyceride level, especially, green tea powder and persimmon ethanol diets were more effective than other diet. All the tea diet groups showed decrease in liver triglyceride level, and persimmon powder and ethanol extract increased fecal triglyceride excretion. Plasma cholesterol levels of all the tea diet groups were not significantly different from the control, but control. Fecal cholesterliver cholesterol concegroups were significantlntrations of all tea y lower than that of ol excretions of persimmon powder, green tea ethanol extract, persommon ethanol extract and green tea ethanol extract groups were significantly higher than that of control. Plasma and liver thiobarbituric acid reactive substance(TBARS) concentrations of all the tea diet groups were lower than that of control. Especially, plasma TBARS concentrations of green tea powder and persimmon ethanol extract groups were sinificantly low. Red blood cell(RBC) superoxide dismutase(SOD) activities of persimmon ethanol extract and green tea water extract groups were increased, and RBC catalase activities of all experimental groups were not significantly different. RBC glutathione peroxidase(GSH-px) activities of persimmon ethanol extract, persimmon water extract and green tea powder groups were increased. Liver SOD activities of all the tea diet groups except green tea ethanol extract group were higher than that of control. Liver catalase activities of all experimental groups were not significantly different, and liver GSH-px activity of green tea powder group was significantly higher than that of control. In conclusion, dried leaf powders, and water and ethanol extracts of persimmon and green tea were effective in lowering lipid level, inhibiting lipid peroxidation and increasing antioxdative enzyme activities in 12-month-old rat. Green tea leaf powder with high contents of flavonoids and water soluble dietar fiber was most effective in lowering plasma triglyceride, cholesterol and TBARS level. (Korean J Nutrition 34(3) : 285~298, 2001)

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.97.2-97.2
• /
• 2018

This study formed a hard TiAlSiWN coating layer using Ti, Al, Si and W raw powders that were mechanically alloyed and refined. The TiAlSi and TiAlSiW coating targets were fabricated using a single PCAS process in a short time with the optimal sintering conditions. The coating targets were deposited on the WC substrate by forming coating layers using TiAlSiN and TiAlSiWN nitride nano-composite structures with an AIP process. The properties of the nitride nano-composite coating layers were compared according to the addition of W. The microstructure of the nitride nano-composite coating layer was analyzed, focusing on the distribution of the crystalline phases, amorphous phases ($Si_3N_4$), and growth orientation of the columnar crystal depending on the addition of W. The mechanical properties of the coating layers were exhibited a hardness of approximately $3,000kg/mm^2$ and adhesion of about 117.77N in the TiAlSiN. In particular, the TiAlSiWN showed excellent properties with a hardness of more than $4,300kg/mm^2$ and an adhesion of about 181.47N.

• Journal of Nutrition and Health
• /
• 제36권10호
• /
• pp.997-1012
• /
• 2003

This study was carried out to investigate the effect of whole grape, grape pomace and grape juice intake on cadmium (Cd) metabolism during aging in thirteen-month-old Sprague-Dawley male rats. One hundred and twenty rats weighing 548.8 $\pm$ 4.3 g were assigned to eight groups according to body weight and were raised for 3, 5 or 7 months on diets containing 2 ％ (w/w) dried powders of three different parts of the grape (Campbell Early) and 0.02 ％ (w/w) CdC12. Food intake tended to decrease with aging, and body weight and epididymal fat pad (EFP) weights of Cd-exposed groups were lower than those of Cd-free groups. Cadmium accumulated in the blood and tissues and Cd concentration was the lowest in the pomace group among Cd-exposed animals. Metallothionein (MT) concentration in the tissues increased through Cd administration. Grape diets, especially grape pomace diets, were effective in decreasing Cd absorption in the tissues by increasing Cd excretion through feces. The intake of grape pomace alleviated the decrease in bone density caused by Cd administration and prevented a decrease in glomerular filtration rates (GFR) with aging. Among the parts of grape, grape pomace, which had highest content of dietary fiber and flavonoids, was the most effective. The results of this study suggest the possibility of using grape pomace as a functional food material, a prospect that previously has been discarded.