• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.851-858
• /
• 2014

Muscat Bailey A (MBA) wine was fermented using the indigenous Korean Saccahromyces cerevisiae strains S13 and D8, and the fermentation characteristics were compared with those of S. cerevisiae W-3, an industrial wine yeast. The strains S13 and D8 showed delayed alcohol fermentation compared with the W-3 strain, but the final alcohol contents of the S13 and D8 wines after fermentation were similar to those of the W-3 wine. The S13 wine showed significantly lower malic-acid content than the W-3 wine, but the D8 wine showed a similar level. Both the wines fermented using the S13 and D8 strains showed significantly lower acetaldehyde, methanol, and fusel oil contents, including n-propanol, iso-butyl alcohol, and iso-amyl alcohol, compared to the W-3 wine. Especially, the methanol content was 98.6 mg/L in the S13 wine and 112.0 mg/L in the D8 wine, which were much lower than 192.8 mg/L in the W-3 wine. The S13 wine obtained the highest score in terms of color among the three wines in the sensory evaluation, with lower Hunter's L, a, and b values compared to the W-3 wine.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.14-21
• /
• 2022

Uniform scions and rootstocks should be produced to ensure grafting success. Light quality is an important environmental factor that regulates seedling growth. The effects of warm- and cool-white light emitting diode (LED) ratios on seedling growth were investigated. Scions and rootstocks of cucumber, tomato, and watermelon were grown in a closed transplant production system using LED as the sole lighting source. The LED treatments were W1C0 (only warm-white), W1C1 (warm-white: cool-white = 1:1), W3C1 (warm-white: cool-white = 3:1), and W5C2 (warm-white: cool-white = 5:2). The seedlings grown in W1C1 had the shortest hypocotyls, and the seedlings grown in W1C0 had the longest hypocotyls among the three tested vegetables. The hypocotyls of watermelon scions, watermelon rootstocks, and tomato rootstocks were shortest in W1C1, followed by those in W3C1, W5C2, and W1C0, but there was no significant difference between W3C1 and W5C2, which remained the same as the ratio of cool-white LEDs increased. In addition, tomato scions had the first and second longest hypocotyls in W1C0 and W3C1, respectively, and the shortest hypocotyls in W5C2 and W1C1, along with W5C2 and W1C1, although the difference was not significant. The stem diameter was highest in W1C0 except for tomato seedlings and rootstocks of watermelon. The shoot fresh weight of scions and rootstocks of cucumber and watermelon and the root fresh weight of cucumber scions were lowest in W1C1. These results indicated that different ratios of LED lighting sources had a strong effect on the hypocotyl elongation of seedlings.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.233-236
• /
• 2000

The structural, electrical and chemical characteristics of Al alloy thin film with low impurity concentrations AlW deposited by using dc magnetron sputtering deposition are investigated for the applications as data bus line in the TFT-LCD panel. The deposited thin films show the decrease of resistivity and the increase of grain size after the RTA at $300^{\circ}C$ for 20 min.. Moreover, the resistivity of AlW does not show appreciable grain size dependence after RTA. It is concluded that the decrease of resistivity after RTA is due to the increase of grain size. The annealed AlW is found to be hillock free. And for investigating chemical attack in TFT-LCD etching processing the electric potential of AlW alloy for Ag/AgCl were investigated by cyclic voltammetry. When W wt.% of AlW alloy was higher than about 3%, the electric potential of AlW was more positive than ITO's. Therefore AlW alloy thin film can be propose to use for data bus line.

• Journal of the Korean Mathematical Society
• /
• v.51 no.3
• /
• pp.509-525
• /
• 2014

Let R be a commutative ring with identity. An R-module M is said to be w-projective if $Ext\frac{1}{R}$(M,N) is GV-torsion for any torsion-free w-module N. In this paper, we define a ring R to be w-semi-hereditary if every finite type ideal of R is w-projective. To characterize w-semi-hereditary rings, we introduce the concept of w-injective modules and study some basic properties of w-injective modules. Using these concepts, we show that R is w-semi-hereditary if and only if the total quotient ring T(R) of R is a von Neumann regular ring and $R_m$ is a valuation domain for any maximal w-ideal m of R. It is also shown that a connected ring R is w-semi-hereditary if and only if R is a Pr$\ddot{u}$fer v-multiplication domain.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.761-769
• /
• 2007

We made 712 thermal property measurements on igneous, metamorphic and sedimentary rock samples from Gyeonggi-do, Gangwon-do and Chungchung-do, Korea. The average thermal conductivities of igneous, metamorphic and sedimentary rocks are 3.58W/m-K, 4.16W/m-K and 4.53W/m-K, respectively. Thermal conductivity of granite and gneiss are 2.13-5.87W/m-K and 2.26-6.67W/m-K, with average values of 3.57W/m-K and 3.945W/m-K, respectively. The average of thermal diffusivities are $1.43mm^2/sec\;and\;1.55mm^2/sec$, respectively; the average of specific heat values are 0.914J/gK, 0.912J/gK for granite and gneiss samples, respectively. The thermal conductivity of a rock type generally have a wide range because it depends on various factors such as dominant mineral phase, micro-structure, anisotropy, and so on.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2010

In this study, we investigated the morphology and thermal stability of interfacial phases in joint between lead free solder(Sn-3.0Ag-0.5Cu) and electroless Ni-W-P under bump metallizations(UBM) with different tungsten contents as a function of thermal aging. Content of phosphorus of each deposits was fixed at 8 wt.%, and content of tungsten was variated each 0, 3, 6 and 9 wt.%. Specimens were prepared by reflowing at $255^{\circ}C$, aging range was $200^{\circ}C$ and up to 2 weeks. After reflow process, in the electroless Ni(W)-P/solder joint, the interfacial intermetallic compound(IMC) was showed both $(Cu,Ni)_6Sn_5$ and $(Ni,Cu)_3Sn_4$. UBM and generated IMC at the interface of lead free solder was proportionally increased with aging time. The thickness of IMC was increased because the generation rate of $Ni(W)_3P$ decreased with increasing contents of W.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1569-1574
• /
• 2005

The in situ nylon bag degradation and in vitro intestinal digestibility of dry matter (DM), and crude protein (CP) of mulberry (Morus alba) plant fractions was studied at four harvest stages, 3 (W3), 5 (W5), 7 (W7) and 9 (W9) weeks. Degradability of DM and CP of the whole plant and stem fractions declined significantly (p<0.01) with advancing plant maturity in the order W3>W5 and W7>W9 and W3>W5>W7>W9, respectively. The degradation of DM and CP of the leaf fraction was also influenced by plant maturity but no trend was observed. The degradation of DM and CP of the whole plant and leaves increased rapidly during the first 48 and 24 h of incubation, respectively, when maximum degradation was reached. In vitro intestinal digestibility of CP was more influenced by the residence time in the rumen than by plant maturity. This study showed that mulberry is suitable as a supplement, particularly to low-quality roughages, in providing a source of rapidly available nitrogen to the rumen microbes, hence improving the roughage degradability and intake.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.67-75
• /
• 2000

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.

• Journal of Biosystems Engineering
• /
• v.18 no.3
• /
• pp.209-219
• /
• 1993

A series of soil bin experiment was carried out on sand to investigate if true model theory is applicable to blade-soil system and finally to find mathematical relationship between the dimensionless terms which contain the blade-soil parameters. The following conclusions were derived from the study. 1. It was proved that the draft of the prototype blade can be predicted without distortion by those of model blades with the length scale of 1.2, 2 and 2.4. 2. For the sand, bulk density was found to be a good measure of soil physical properties which are pertinent to predict the draft of the blade-soil system. 3. The mathematical relationship between $D/{\gamma}W$ and d/W, ${\beta}$, and $V^2/Wg$ are as follows ; $$\frac{D}{{\gamma}W^3}=124.98[\frac{d}{W}]^2+7.16[\frac{d}{W}]+0.43 \\ \frac{D}{{\gamma}W^3}=-0.00099{\beta}^2+0.13{\beta}-2.01 \\ \frac{D}{{\gamma}W^3}=0.041[\frac{V^2}{Wg}]^2+0.08[\frac{V^2}{Wg}]+1.3$$

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.134-134
• /
• 1997