• 제목/요약/키워드: $V_2I$

검색결과 5,351건 처리시간 0.042초

Pharmacokinetic disposition of apicidin possessing histone deacetylase inhibiting activities

  • Shin, Beom-Soo;Jun, Yoon-Sik;Kim, Chul-Hwan;Yoo, Sun-Dong
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
    • /
    • pp.244.2-244.2
    • /
    • 2003
  • The objective of this study was to characterize the absorption and pharmacokinetic disposition of novel cyclic tetrapeptide, apicidin, in rats. Apicidin was administered to SD rats by i.v. bolus injection (1,2 or 4 mg/kg) and oral gavages (10 mg/kg). Serum levels of apicidin were monitored by LC/MS over 8 hours following each administration. Upon i.v. injection, serum levels of apicidin were best fit by a multi-exponential equation. The t$\frac{1}{2}$. Cl$\sub$s/ and V$\sub$ss/ ranged from 0.9-1.1 hr, 52.8-56.5 ml/min/kg, and 2.6-2.7 L/kg, respectively. (omitted)

  • PDF

응력 및 변형률 수준을 고려한 궤도 흙노반의 변형계수 특성 분석 (Investigation of Stiffness Characteristics of Subgrade Soils under Tracks Based on Stress and Strain Levels)

  • 임유진;김대성;조호진;사공명
    • 한국철도학회논문집
    • /
    • 제16권5호
    • /
    • pp.386-393
    • /
    • 2013
  • 본 연구에서는 궤도 하부 노반상에서 다짐도 확인 및 강화노반 두께 결정을 위하여 사용되는 변형계수 $E_{v2}$ 측정방법의 적절성과 측정값의 유효성을 검토하였다. 이를 위하여 반복평판재하시험(RPBT)을 실시하고 평판직하부에서 발생하는 압축변형률을 파악하였다. 동일 흙노반재료에 대한 공진주시험으로부터 획득된 전단탄성계수감소곡선과 $E_{v2}$를 비교하였다. 실 현장 RPBT의 발생변형률 수준과 변형계수의 크기가 합리적인지를 분석하기 위하여 응력조건과 대표 평균변형률계수($I_z$) 보정에 의해 반복평판재하시험 변형계수($E_{v2}$)를 재평가하였다. PLAXIS 프로그램을 이용하여 깊이에 따른 변형률 영향계수($I_z$)를 재산정하여 반복평판재하시험 결과($E_{v2}$) 해석에 미치는 변형률 영향계수의 영향을 분석하였으며 ABAQUS를 이용하여 3D궤도구조에서 노반이 받는 변형률수준을 확인하였다. 궤도하부구조가 경험하는 변형률수준에서의 변형계수 $E_{v2}$를 획득하기 위해서는 노반의 비선형성을 구현할 수 있도록 현 반복평판재하시험의 하중단계를 세분화할 필요성을 확인하였다.

Characteristics of InGaN/GaN Quantum Well Structure Grown by MBE

  • 윤갑수;김채옥;박승호;원상현;정관수;엄기석
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1998년도 제14회 학술발표회 논문개요집
    • /
    • pp.110-110
    • /
    • 1998
  • GaN는 직접천이형 에너지 캡을 가지며 In과 화합물을 형성할 경우 1.geV-3.4eV까지 다양한 에너지 캡을 가지므로 청색 발광소자 고출력소자 고온 전자소자둥 웅용성이 많 은 물절로서 각광을 받고 있다. 그러나 G랴‘에 적합한 기판이 없다는 문제점으로 인하여 F FET, LD와 같은 다양한 구조의 웅용에 제 약이 따랐다. 이에 본 연구에서는 RF(radio frequency) Plasma-Assisted MBE( molecular beam e epitaxy )를 이용하여 InxGaj xN/G암J 양자우물 구조를 성장하였다. 이렇게 성장된 I InxGaj xN 박막과 InxGaj xN/GaN 양자우물구조의 특성의 분석은 광학적 특성올 PL( p photoluminescence ) , 결 정 성 의 분석 은 XRD ( x-ray diffraction ), 표면 과 단변 의 계 변 특성은 SEM(scanning electron microscopy)을 이용하여 분석하였다. 저온 PL의 측정결 과 기판온도를 680$^{\circ}$C로 고정한 후 In cell의 온도를 650$^{\circ}$C에서 775$^{\circ}$C까지 증가함에 따라 I InxGaj xN에 관계된 피크위치가 약3이neV정도 red shift 함을 관찰할 수 있었다. 한편 I InxGaj xN/GaN 양자우물구조의 경우 PL피크가 3.2없eV로써 InxGaj- xN의 PL 피크에 비 해 에서 약 25me V 고에너지 이동이 관측되었으며 이것은 우불 내에서 에너지레벨의 c confinement효과에 의해 에너지의 변화에 의한 것엄올 확인하였으며, 양자우물 구조에서 우물의 두께를 줄임에 따라 변화 폭은 1이neV정도 고에너지 이동을 관찰할 수 있었다. X XRD 측정의 결과 In의 mole fraction에 따라 격자상수의 변화를 관찰하였으며, 결정 성의 변화를 피크의 세기로 관찰하였다 .. XRD로 판단한 In의 mole fraction은 0.2임을 알 았다 .. SEM 측정은 표변과 단면의 측정으로서 표연특성과 단면의 특성을 InxGaj xN, I InxGaj xN/GaN 양자우물 구조 모두 알아보았다. 측정 결과 InxGaj-xN의 성 장조건으로 기판온도가 낮아지면서 표면의 거칠기 정도가 증가하였으며,680$^{\circ}$C의 기판온도에서 성장 한 양자우물 구조에 있어서 매끄라운 표면올 얻올 수 있었다.

  • PDF

pH에 민감한 그래핀 전계효과 트랜지스터(FET) (pH Sensitive Graphene Field-Effect Transistor(FET))

  • 박우환;송광섭
    • 전자공학회논문지
    • /
    • 제53권2호
    • /
    • pp.117-122
    • /
    • 2016
  • 최근 환경, 의료분야에서 실시가 검출 및 인체 삽입형 pH 센서에 대한 요구가 증가하고 있다. 이에 본 연구에서는 생체적 합성이 우수한 그래핀을 이용하여 실시간 pH 검출이 가능한 센서를 개발하였다. Polyethylene terephthalate(PET) 기판에 전사된 그래핀 표면에 이온 용액속에서 동작하는 전계효과 트랜지스터(solution-gated field-effect transistors; SGFETs)를 제작하였으며 이를 이용하여 이온 용액의 pH를 검출하였다. 제작한 트랜지스터의 게이트 채널 길이는 $500{\mu}m$, 게이트 채널 폭은 8mm이다. 이온 용액속에서 트랜지스터 동작특성 및 pH 감도를 평가하기 위하여 드레인-소스 전압($V_{DS}$)에 따른 드레인-소스 전류($I_{DS}$) 및 게이트-소스 전압($V_{GS}$)에 따른 드레인-소스 전류($I_{DS}$)를 측정하였다. PET기판에 전사된 그래핀 위에 제작한 그래핀 SGFETs의 전류-전압 특성은 이온 용액내에서 매우 안정적으로 동작하였으며 그래핀 SGFETs의 Dirac point는 이온 용액의 pH값이 증가함에 따라 양의 방향으로 19.32 mV/pH씩 증가하였다.

가공의치(架工義齒)에 작용(作用)하는 Stress에 관(關)한 광탄성학적(光彈性學的) 분석(分析) (Photoelastic Stress Analysis of Fixed Partial Dentures)

  • 조원행
    • 대한치과보철학회지
    • /
    • 제18권1호
    • /
    • pp.15-35
    • /
    • 1980
  • The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

  • PDF

Partial Mitochondrial Gene Arrangements Support a Close Relationship between Tardigrada and Arthropoda

  • Ryu, Shi Hyun;Lee, Ji Min;Jang, Kuem-Hee;Choi, Eun Hwa;Park, Shin Ju;Chang, Cheon Young;Kim, Won;Hwang, Ui Wook
    • Molecules and Cells
    • /
    • 제24권3호
    • /
    • pp.351-357
    • /
    • 2007
  • Regions (about 3.7-3.8 kb) of the mitochondrial genomes (rrnL-cox1) of two tardigrades, a heterotardigrade, Batillipes pennaki, and a eutardigrade, Pseudobiotus spinifer, were sequenced and characterized. The gene order in Batillipes was $\underline{rrnL}-\underline{V}-\underline{rrnS}-\underline{Q}-\underline{I}$-M-nad2-W-$\underline{C}-\underline{Y}$-cox1, and in Pseudobiotus it was $\underline{rrnL}-\underline{V}-\underline{rrnS}-\underline{Q}$-M-nad2-W-$\underline{C}-\underline{Y}$-cox1. With the exception of the trnI gene, the two tardigrade regions have the same gene content and order. Their gene orders are strikingly similar to that of the chelicerate Limulus polyphemus (rrnL-V-rrnS-CR-I-Q-M-nad2-W-C-Y-cox1), which is considered to be ancestral for arthropods. Although the tardigrades do not have a distinct control region (CR) within this segment, the trnI gene in Pseudobiotus is located between rrnL-trnL1 and trnL2-nad1, and the trnI gene in Batillipes is located between trnQ and trnM. In addition, the 106-bp region between trnQ and trnM in Batillipes not only contains two plausible trnI genes with opposite orientations, but also exhibits some CR-like characteristics. The mitochondrial gene arrangements of 183 other protostomes were compared. 60 (52.2%) of the 115 arthropods examined have the M-nad2-W-C-Y-cox1 arrangement, and 88 (76.5%) the M-nad2-W arrangement, as found in the tardigrades. In contrast, no such arrangement was seen in the 70 non-arthropod protostomes studied. These are the first non-sequence molecular data that support the close relationship of tardigrades and arthropods.

PECVD와 NO 어닐링 공정을 이용하여 제작한 N-based 4H-SiC MOS Capacitor의 SiC/SiO2 계면 특성 (SiC/SiO2 Interface Characteristics in N-based 4H-SiC MOS Capacitor Fabricated with PECVD and NO Annealing Processes)

  • 송관훈;김광수
    • 전기전자학회논문지
    • /
    • 제18권4호
    • /
    • pp.447-455
    • /
    • 2014
  • 본 연구에서는 4H-SiC MOSFET의 주요 문제점인 $SiC/SiO_2$ 계면의 특성을 향상시키기 위해 PECVD (plasma enhanced chemical vapor deposition) 공정을 이용하여 n-based 4H-SiC MOS Capacitor를 제작하였다. 건식 산화 공정의 낮은 성장속도, 높은 계면포획 밀도와 $SiO_2$의 낮은 항복전계 등의 문제를 극복하기 위하여 PECVD와 NO어닐링 공정을 사용하여 MOS Capacitor를 제작하였다. 제작이 끝난 후, MOS Capacitor의 계면특성을 hi-lo C-V 측정, I-V 측정 및 SIMS를 이용해 측정하고 평가하였다. 계면의 특성을 건식 산화의 경우와 비교한 결과 20% 감소한 평탄대 전압 변화, 25% 감소한 $SiO_2$ 유효 전하 밀도, 8MV/cm의 증가한 $SiO_2$ 항복전계 및 1.57eV의 유효 에너지 장벽 높이, 전도대 아래로 0.375~0.495eV만큼 떨어져 있는 에너지 영역에서 69.05% 감소한 계면 포획 농도를 확인함으로써 향상된 계면 및 산화막 특성을 얻을 수 있었다.

Anti-inflammatory Activity of Veronica peregrina

  • Jeon, Hoon
    • Natural Product Sciences
    • /
    • 제18권3호
    • /
    • pp.141-146
    • /
    • 2012
  • Veronica peregrina (Scrophylariaceae) has been widely used as a Korean traditional medicine for the treatment of various pathological conditions including infection, hemorrhage and gastric ulcer. In the current study, we investigated the inhibitory effect of methanolic extracts of V. Peregrina (VPM) on the LPS-mediated nitric oxide (NO) production in mouse (C57BL/6) peritoneal macrophages. NO production was significantly down-regulated by the treatment of VPM dose dependently. To evaluate the mechanism of the inhibitory action of VPM on NO production, we performed iNOS enzyme activity assay and checked the change of inducible nitric oxide synthase (iNOS) levels by Western blotting. Although VPM did not affect iNOS enzyme activity, iNOS protein expression was attenuated by VPM indicating VPM inhibits NO production via suppression of iNOS enzyme expression. In addition, VPM attenuated the expression of another pro-inflammatory mediator such as cyclooxygenase-2 (COX-2) in a dose dependent manner. We also found that VPM can reduce trypsin-induced paw edema in mice. Based on this study, we suggest that V. peregrina may be beneficial in diseases which related to macrophage-mediated inflammatory disorders.

Prosodic Boundary Effects on the V-to-V Lingual Movement in Korean

  • Cho, Tae-Hong;Yoon, Yeo-Min;Kim, Sa-Hyang
    • 말소리와 음성과학
    • /
    • 제2권3호
    • /
    • pp.101-113
    • /
    • 2010
  • The present study investigated how the kinematics of the /a/-to-/i/ tongue movement in Korean would be influenced by prosodic boundary. The /a/-to-/i/ sequence was used as 'transboundary' test materials which occurred across a prosodic boundary as in /ilnjəʃ$^h$a/ # / minsakwae/ ('일년차#민사과에' 'the first year worker' # 'dept. of civil affairs'). It also tested whether the V-to-V tongue movement would be further influenced by its syllable structure with /m/ which was placed either in the coda condition (/am#i/) or in the onset condition (/a#mi). Results of an EMA (Electromagnetic Articulagraphy) study showed that kinematical parameters such as the movement distance (displacement), the movement duration, and the movement velocity (speed) all varied as a function of the boundary strength, showing an articulatory strengthening pattern of a "larger, longer and faster" movement. Interestingly, however, the larger, longer and faster pattern associated with boundary marking in Korean has often been observed with stress (prominence) marking in English. It was proposed that language-specific prosodic systems induce different ways in which phonetics and prosody interact: Korean, as a language without lexical stress and pitch accent, has more degree of freedom to express prosodic strengthening, while languages such as English have constraints, so that some strengthening patterns are reserved for lexical stress. The V-to-V tongue movement was also found to be influenced by the intervening consonant /m/'s syllable affiliation, showing a more preboundary lengthening of the tongue movement when /m/ was part of the preboundary syllable (/am#i/). The results, together, show that the fine-grained phonetic details do not simply arise as low-level physical phenomena, but reflect higher-level linguistic structures, such as syllable and prosodic structures. It was also discussed how the boundary-induced kinematic patterns could be accounted for in terms of the task dynamic model and the theory of the prosodic gesture ($\pi$-gesture).

  • PDF