• 제목/요약/키워드: $U_3Si$

검색결과 499건 처리시간 0.031초

미이용 산림바이오매스 및 폐목재의 기포 유동층 Air 가스화 특성 연구 (Air Gasification Characteristics of Unused Woody Biomass in a Lab-scale Bubbling Fluidized Bed Gasifier)

  • 한시우;서명원;박성진;손성혜;윤상준;라호원;문태영;문지홍;윤성민;김재호;이은도;정수화;양창원;이영우
    • Korean Chemical Engineering Research
    • /
    • 제57권6호
    • /
    • pp.874-882
    • /
    • 2019
  • 본 연구에서는, Lab-scale 기포 유동층 가스화기(직경 : 0.11 m, 높이 : 0.42 m)에서 미이용 산림 바이오매스 4종과 폐목재 1종의 가스화 특성을 살펴보았다. 실험은 온도와 연료 주입량을 각각 $800^{\circ}C$, 1 kg/h로 고정하고, ER 0.15-0.3, 가스 유속 $2.5-5U_0/U_{mf}$으로 변화시키면서 진행했다. 층 물질로는 silica sand와 olivine을 사용하였다. 생성 가스의 조성은 NDIR 분석기와 GC를 통해 분석하였으며, 분석 결과 평균적으로 $H_2$ 3~4 vol%, CO 15~16 vol%, $CH_4$ 4 vol%, $CO_2$ 18~19 vol.%으로 미이용 산림바이오매스와 폐목재 모두 비슷한 조성을 보였으며, 생성 가스의 평균 저위발열량은 $1193{\sim}1301kcal/Nm^3$을, 고위발열량은 $1262{\sim}1377kcal/Nm^3$을 나타내었다. 또한, 타르 저감 효과를 알아보고자 층 물질로 olivine을 사용 시 silica sand에 비해 생성 가스 내 C2 이상 성분이 대부분 감소하였고, $H_2$ 함량이 증가하여 타르의 cracking 반응이 생겼음을 확인하였다. 비응축성 타르는 72% ($1.24{\rightarrow}0.35g/Nm^3$), 응축성 타르는 27% ($4.4{\rightarrow}3.2g/Nm^3$) 가량 감소하는 효과를 확인하였다.

T-OLED의 반사전극으로 사용하기 위한 Ag 박막 표면의 UV에 의한 산화 및 KPFM을 이용한 표면 전위 측정

  • 김성준;김수인;김동욱;김주연;이은혁;신동훈;이창우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.182.1-182.1
    • /
    • 2013
  • Silver (Ag)는 높은 반사율을 가지고 있어 Top-Emission Organic Light Emitting Diode (T-OLED)의 반사전극으로 사용하기 적합하지만 일함수가 낮은 단점 (4.3 eV)을 가지고 있다. 이런 낮은 일함수를 증가시키기 위하여 Ag 박막 표면을 산화시켜 일함수를 증가시키기 위한 연구가 진행중에 있으며, 이 연구에서는 UV로 $O_3$을 발생시켜 Ag 박막 표면을 산화시키기 위한 연구를 진행하였다. 특히, Ag 박막 표면의 일함수 변화를 측정하기 위하여 SPM (Scanning Probe Microscopy)의 KPFM (Kelvin Probe Force Microscopy) mode를 적용하여 nano 영역에서의 일함수 변화를 surface potential로 측정하여 UV 표면 산화에 의한 표면 일함수 형상을 확인하였다. Ag 박막은 rf magnetron sputter를 사용하여, Si 기판위에 300nm 두께로 증착시켰다. 이후 $O_3$ 발생되는 UV 램프로 Ag 박막 표면 30초 간격으로 최대 5분간 산화시켰으며, 이후 KPFM mode를 사용하여 산화 시간에 따른 Ag 박막 표면의 potential 변화를 측정하였다. 0~3분간 산화된 Ag 박막 표면의 potential은 약 6 mV로 일정하였으나 3분 이후 최대 110 mV까지 급격하게 변화하는 것을 확인할 수 있었다. Ag 박막 표면의 RMS roughness는 UV 산화처리 전0.7 nm였으나, potential이 급격하게 증가하는 시점인 3분 이후 2.83 nm로 약 400% 이상 증가하였다. 이를 통해 $O_3$ 발생 UV 램프로 산화된 Ag 박막의 표면 물성은 처리 시간에 따라 급격히 변하는 것을 확인하였다.

  • PDF

법랑모세포 분화와 법랑질 형성과정에서 OD314, Apin protein의 발현 및 기능 (EXPRESSION AND FUNCTION OF OD314, APIN PROTEIN, DURING AMELOBLAST DIFFERENTIATION AND AMELOGENESIS)

  • 박종태;최용석;김흥중;정문진;오현주;신인철;박주철;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제31권6호
    • /
    • pp.437-444
    • /
    • 2006
  • 본 연구에서는 법랑모세포 분화와 법랑질 형성에 연관이 있는 OD314 일명 Apin protein의 기능을 밝힐 목적으로, in-situ hybridization에 의한 OD314 mRNA 발현과 법랑모세포 세포주에서 OD314와 enamel matrix protein의 발현, 그리고 OD314 유전자를 과발현/억제시킬 수 있는 construct를 제작한 후 법랑질 형성 중에 OD314의 기능을 알아보고자 RT-PCR를 시행하여 다음과 같은 결과를 얻었다. 1. OD314 mRNA는 발생중인 상아모세포보다 법랑모세포에서 강하게 발현되었다. 2. Tuftelin은 석회화 결정이 형성되는 14일까지 발현이 지속되고, 그 이후부터 점차 감소하였다. Amelogenin과 enamelin은 7일부터 그 발현이 점점 감소하였다. 3. U6-OD314 siRNA construct를 이용하여 transfection한 법랑모세포 세포주는 OD314와 tuftelin, MMP20 mRNA 발현이 감소하였으며, CMV-OD3l4를 transfection하여 OD314의 과발현을 유도한 경우에는 OD3l4와 MMP20 mRNA의 발현이 뚜렷이 증대되었다. 이 결과는 OD314가 법랑모세포의 분화와 법랑질의 형성 그리고 석회화 과정에 중요한 역할을 하는 새로운 인자임을 시사한다.

Metal-Assisted Chemical Etching에 의한 InAlP표면 Texture 형성 및 반사율 변화

  • 신현욱;오시덕;이세원;최정우;신재철;김효진
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.304-304
    • /
    • 2012
  • III-V 화합물 태양전지는 실리콘 등 다른 태양전지에 비해 1sun상 30% 이상의 고효율을 갖고 있고 direct bandgap과 높은 이동도 등의 물질특성과 3족과 5족의 비율 조절로 같은 결정구조에서 에너지 bandgap이 다른 물질들을 만들기에 용이하여 태양전지 스펙트럼의 넓은 영역을 흡수할 수 있는 장점이 있다. 그러나 셀 자체의 물질이 실리콘에 비하여 고가여서 고성능이 요구되는 우주 인공위성 등에 적용이 되었지만, 2000년대 이후로 집광에 적용 가능한 태양전지의 연구를 거듭하여 2005년부터는 값싼 프레넬 렌즈를 이용하여 1 sun에 비해 500배 해당하는 빛을 셀에 집광하여 보다 효율을 증가시킴으로써 지상발전용에도 적용 가능한 셀을 형성하게 되었다. 더불어 태양전지의 효율을 증가시키기 위한 다양한 구조적 변화의 시도도 많이 이루어지고 있다. 최근 실리콘 태양전지의 표면에 texture 구조를 주어 높은 흡수율과 낮은 반사율을 갖게 함으로써 효율을 증가시키는 사례가 많아지고, III-V 화합물 태양전지도 texturing에 의해 증가된 효율을 발표한바 있다. 본 연구에서는 III-V 화합물 InGaP 태양전지의 window층으로 사용되는 InAlP 층에 Metal-assisted chemical etching (mac etching) 방법으로 texture 구조를 형성하여 etching 시간에 따른 InAlP층의 표면 변화와 반사율의 변화를 분석하였다.

  • PDF

Antibacterial property and characterization of CuSn thin films deposited by RF magnetron co-sputtering method

  • 강유진;박주연;김동우;김학준;강용철
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.360.2-360.2
    • /
    • 2016
  • CuSn thin films were fabricated by rf magnetron co-sputtering method on the Si(100) substrate for evaluation of the antibacterial effect. The co-sputtering process was performed with different rf powers and sputtering times to regulate the thickness of the films and relative atomic ratio of Cu to Sn. The physicochemical properties of the CuSn thin films were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), Optical microscope (OM), 4-point probe, and antibacterial test. An antibacterial test was conducted with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as changing contact times between CuSn fillms and bacteria suspension. We compared to the crystalline structures of films before sterilization and after sterilization by XRD measurement. The changes of oxidation states of Cu and Sn and the chemical environment of films before and after antibacterial test were investigated with high resolution XPS spectra in the regions of Cu 2p, Cu LMM, and Sn 3d. After antibacterial test, the morphology of the films was checked with an OM images. The electrical properties of the CuSn films such as surface resistance and conductivity were measured by using 4-point probe.

  • PDF

푸리에 급수에 대한 총합가능성의 결과들에 관하여 (On the Results of Summability for Fourier series)

  • 이정오
    • 한국수학사학회지
    • /
    • 제30권4호
    • /
    • pp.233-246
    • /
    • 2017
  • $Ces{\grave{a}}ro$ summability is a generalized convergence criterion for infinite series. We have investigated the classical results of summability for Fourier series from 1897 to 1957. In this paper, we are concerned with the summability and summation methods for Fourier Series from 1960 to 2010. Many authors have studied the subject during this period. Especially, G.M. Petersen,$K{\hat{o}}si$ Kanno, S.R. Sinha, Fu Cheng Hsiang, Prem Chandra, G. D. Dikshit, B. E. Rhoades and others had studied neoclassical results on the summability of Fourier series from 1960 to 1989. We investigate the results on the summability for Fourier series from 1990 to 2010 in section 3. In conclusion, we present the research minor lineage on summability for Fourier series from 1960 to 2010. $H{\ddot{u}}seyin$ Bor is the earliest researcher on ${\mid}{\bar{N}},p_n{\mid}_k$-summability. Thus we consider his research results and achievements on ${\mid}{\bar{N}},p_n{\mid}_k$-summability and ${\mid}{\bar{N}},p_n,{\gamma}{\mid}_k$-summability.

유도 결합 플라즈마($Cl_2/Ar$)를 이용한 $CeO_2$ 박막의 식각 특성 연구 (A Study on the Etching Characteristics of $CeO_2$ Thin Films using inductively coulped $Cl_2/Ar$ Plasma)

  • 오창석;김창일;권광호
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2000년도 추계학술대회논문집
    • /
    • pp.29-32
    • /
    • 2000
  • Cerium oxide thin film has been proposed as a buffer layer between the ferroelectric film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS ) structures for ferroelectric random access memory (FRAM) applications. In this study, CeO$_2$thin films were etched with Cl$_2$/Ar gas combination in an inductively coupled plasma (ICP). The highest etch rate of CeO$_2$film is 230 $\AA$/min at Cl$_2$/(Cl$_2$+Ar) gas mixing ratio of 0.2. This result confirms that CeO$_2$thin film is dominantly etched by Ar ions bombardment and is assisted by chemical reaction of Cl radicals. The selectivity of CeO$_2$to YMnO$_3$was 1.83. As a XPS analysis, the surface of etched CeO$_2$thin films was existed in Ce-Cl bond by chemical reaction between Ce and Cl. The results of XPS analysis were confirmed by SIMS analysis. The existence of Ce-Cl bonding was proven at 176.15 (a.m.u.).

  • PDF

GaAs(100) 기판에 사전 열분해하지 않은 Monoethylarsine을 사용하는 Chemical Beam Epitaxy방법에 의한 InGaAs박막의 Facet 성장에 관한 연구 (Facet Growth of InGaAs on GaAs(100) by Chemical Beam Epitaxy Using Unprecracked Monoethylarsine)

  • 김성복;박성주;노정래;이일항
    • 한국진공학회지
    • /
    • 제5권3호
    • /
    • pp.199-205
    • /
    • 1996
  • InGaAs 박막의 facet 성장을 연구하기 위하여 triethygallium(TEGa), trimethylindium (TMIn)과 사전 열분해하지 않은 monoethylarsine (MEAs)을 사용하여 chemical beam epitaxy (CBE) 법으로 InGaAs 박막을 선택적으로 성장시켰다. 성장 온도와 패턴의 방향에 따라 facet 형성이 매우 다르게 나타났다. 마스크를 [11] 방향으로 제작한 기판에서는 facet의 면이 (311), (377)과 (11)의 여러 면이 형성되었으나 성장 온도가 올라감에 따라 (311)한 면으로 발전하였다. 또한 마스크를 [011]방향으로 하였을 때는, 성장 온도가 증가함에 따라 facet은 (11)h가 (111)면에서 (111)면으로 변하였다. 이러한 결과들은 측면에서 원료가스의 표면 이동 거리가 성장 온도에 따라서 변화하는 차이에 기인하는 것으로 믿어진다. U자 형태를 가지는 (100)의 윗면은 간단한 dangling bond 모형으로 설명할수 있었다.

  • PDF

FAME Analysis to Monitor Impact of Organic Matter on Soil Bacterial Populations

  • Kim, Jong-Shik;Joo, Jin-Bee;Weon, Hang-Yeon;Kang, Chang-Seong;Lee, Si-Kyung;Yahng, Chahng-Sool
    • Journal of Microbiology and Biotechnology
    • /
    • 제12권3호
    • /
    • pp.382-388
    • /
    • 2002
  • In order to assess the effects of organic fertilizer on soil microbial community structure and diversity in the greenhouse fields, fatty acid methyl ester (FAME) was analyzed by the MIDI (Microbial ID, Inc., Newark, DE, U.S.A.) system and enumerations were performed. In relation to bacterial division of each sample, low GC Gram-positive bacteria were predominant among bacteria cultured on aerobic bacteria media. On the other hand, alpha subdivision was predominant on proteobacteria of control and OM (organic matter) 1 treated plot, and Flavobacterium spp. existed in OM2 plot on crystal violet media of all samples. Shannon-weaver Index (H) of OM1 plot varied most by 1.9 and 5.0 among bacteria cultured on aerobic bacteria media and crystal violet media, respectively. Our results revealed that addition of the organic wastes to soil led to a highly diverse microbial community, but the excessive amounts of organic and mineral fertilizer applied in the greenhouse fields produced excess nutrients in soil and led to simplification on bacterial populations.

연구로용 우라늄-실리사이드 분산 핵연료의 변형모델 (A Deformation Model of Uranium-Silicide Dispersion Fuel for Research Reactor)

  • T. S. Byun;S. K. Suh;W. Hwang
    • Nuclear Engineering and Technology
    • /
    • 제28권2호
    • /
    • pp.150-161
    • /
    • 1996
  • 연구로용 우라늄-실리사이드 분산 핵연료에서의 응력 및 변형율 분포를 계산할 수 있는 변형모델을 개발하였다. 이 변형모델은 탄소성이론 및 지수법칙 크리프이론을 기초로 한 것이며, 또한 등방 핵연료팽윤 및 열팽창을 가정하였다. 개발된 모델을 HANARO 및 카나다의 NRU 핵연료에 적용하여 본 결과 핵연료의 변형을 성공적으로 계산하는 것으로 판단되었다. 계산결과에 따르면, 연구로용 우라늄-실리사이드 분산핵연료가 연소할 때 핵연료심에서 가장 중요한 변형기구는 팽윤이며, 피복관에서 가장 중요한 변형기구는 크리프이다. 또한, 피복관에서 원주방향 최대응력은 항상 5 MPa 이하로서 항복응력보다 훨씬 낮게 유지되었다. 여기서 고려한 두 핵연료설계에 대해서 전 연소도 범위에서 핵연료봉의 부피변화는 10% 이하로 예측되었다.

  • PDF