• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권1호
• /
• pp.86-93
• /
• 2016

Fenton is the reaction using the OH· radicals generating by interaction between hydrogen peroxide and Fe²⁺ which can oxidize the contaminants. Fe²⁺ ions are oxidized to Fe³⁺ ions by reaction with H₂O₂ and formed OH· radicals. UV-Fenton process includes the additional reaction that generates the OH· radicals by photodegradation of H₂O₂. In methylorange (MO) decolourization experiment with UV-Fenton, optimal Fe²⁺: H₂O₂ ratio was obtained at 1 : 10. Based on the obtained condition (H₂O₂= 10mM, Fe²⁺ = 1 mM) with/without UV-fenton experiment was carried out. Removal efficiency and sludge production were measured at 30 min. The case of w/o UV irradiation and only H₂O₂ was hardly treated and only Fe²⁺ showed 65% removal owing to coagulation. When UV-Fenton process in optimal ratio (Fe²⁺: H₂O₂ = 1 : 10), UV irradiation showed better removal efficiency than of w/o UV irradiation. Also, MO decolourization was a function of the hydrogen peroxide concentration (x₁), Fe²⁺:H₂O₂ ratio (x₂), and numbers of UV lamp (x₃) from the application of the response surface methodology. Statistical results showed the order of significance of the independent variables to be hydrogen peroxide concentration > numbers of UV l amp > Fe²⁺: H₂O₂ ratio.

• 한국진공학회지
• /
• 제19권2호
• /
• pp.91-95
• /
• 2010

상온에서 고품질의 $TiO_2$ 박막을 제조하기 위하여 titanium isopropoxide [Ti(OCH$(CH_3)_2)_4$, TIP]와 $H_2O$을 이용한 자외선 활성화 원자층 증착(UV-enhanced atomic layer deposition: UV-ALD) 기술을 개발하였다. UV-ALD 기술은 상온에서 자체제어 표면 반응(self-limitting surface reaction)을 통해 균일하고 고품위 등방 특성을 갖는 순수한 $TiO_2$ 박막 증착이 가능하였다. ALD 반응 시 조사되는 자외선은 Si 기질 위에 우수한 접착력을 가지는 고품질의 $TiO_2$ 박막을 얻는데 효과적이었다. UV-ALD 기술은 높은 단차비(aspect ratio)를 가지는 trench 기질 위에 균일한 $TiO_2$ 박막을 증착하는 데에 적용되었다.

• 대한환경공학회지
• /
• 제22권2호
• /
• pp.241-249
• /
• 2000

난분해성 폐수인 사진현상폐수의 $UV/H_2O_2$ 및 $H_2O_2$의 고급산화에 의한 오염물질의 제거 실험을 실시하였다. $UV/H_2O_2$ 산화에서 $H_2O_2$의 분해로 $OH^-$ 라디칼이 발생되는데 파장 190~300 nm의 UV가 반응의 촉매 역할을 한다. $OH^-$ 라디칼은 수명은 짧으나 강력한 산화력을 갖고 있는데, 이 산화력은 폐수처리에서 폐수나 액상 폐기물의 유기물질을 제거하는데 이용된다. 본 연구에서 기존의 tube형 반응조의 단점을 보완한 UV-자유반사 반응조를 제작하여 사용하였으며 UV원으로는 수은 고압램프가 이용되었다. 본 실험에서는 반응시간과 $H_2O_2$ 주입량 및 pH 변화에 따른 오염물의 처리효율의 변화를 조사하였는데 $H_2O_2$의 주입량이 증가할수록 처리효율이 높았으나 그 차이는 미미하였으며, pH 8에서 보다는 3에서 처리효율이 약간 높았으나 그 차이 역시 크지 않았다. 본 연구에서 사진현상폐수 처리의 적정 운전조건은 pH 8, $H_2O_2$ 주입량은 유입수의 COD를 기준으로 한 1.3배 화학량론적 주입으로 나타났는데, 5시간의 처리에서 $COD_{Cr}$, TOC 및 색도의 제거효율은 각각 약 47.5%, 75.0% 및 91.5%로 나타났다. 반응 후 생분해성의 지표인 BOD/COD 비는 초기 0.04에서 0.21로 약 5.3배 증가하였다.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.429-437
• /
• 2006

화학세정폐수에 함유되어 있는 citric acid의 효율적인 처리방안을 수립하기 위해 $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton 산화방법을 이용하여 각각 citric acid의 제거효율 및 그에 따른 전력소비량을 평가하였다. 그 결과 조사된 최적 처리조건에서 $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton 산화방법을 이용한 citric acid 농도에 근거한 TOC 제거효율은 각각 95.5%, 92.3%, 91.5%로 조사되었으며, 그에 따른 전력소비량은 $11.26kWh/m^3,\;3.85kWh/m^3,\;0.799kWh/m^3$으로 조사되었다. 이 결과에 의하면 세가지 광화학적 산화방법 모두 유기물질이 90% 이상 제거되어 citric acid의 분해에 효과적인 것으로 판단되었다. 그러나 Photo-Fenton 산화방법이 다른 방법에 비해 처리에 소요되는 반응시간이 짧은 것으로 나타났다. 또한 광화학적 산화방법의 운영비를 결정짓는데 중요한 요소인 전력소모량 측면에서도 Photo-Fenton 산화방법이 다른 방법에 비해 우수한 것으로 조사되어 본 연구에서 비교하는 세가지 방법 중 citric acid 처리에는 Photo-Fenton 방법이 효율적인면과 경제성면에서 가장 적합한 처리기술로 결론지을 수 있었다.

• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.28-32
• /
• 2006

The degradation of atrazine was explored using UV alone, $H_2O_2/UV$, oxalate/UV and oxalate-assisted $H_2O_2/UV$. The addition of oxalate to the $H_2O_2/UV$ (oxalate-assisted $H_2O_2/UV$) process was the most effective method for the degradation of atrazine. The overall kinetic rate constant was split into the direct oxidation due to photolysis and that by the radicals from hydrogen peroxide or oxalate. In semi-empirical terms, the initial concentration of hydrogen peroxide had a greater contribution than that of oxalate for atrazine oxidation.

• 산업기술연구
• /
• 제27권A호
• /
• pp.25-29
• /
• 2007

Ozone alone, Ozone/GAC, Ozone/$H_2O_2$ and Ozone/GAC/$H_2O_2$ processes were introduced for treatment of humic acid, which is a representative refractory organic compound. $H_2O_2$ and GAC used as catalysts for experiment. The treatment efficiencies of humic acid in each process were analyzed for pH variation, DOC removal, and $UV_{254}$ decrease. $UV_{254}$ decrease in Ozone/GAC and Ozone/GAC/$H_2O_2$ processes were the highest with about 93%, and Ozone alone and Ozone/$H_2O_2$ processes were 88%. DOC removal in Ozone/GAC/$H_2O_2$ process was the highest with 71%. Removal by Ozone/GAC, Ozone alone, and Ozone/$H_2O_2$ processes were 66%, 39%, and 47%, respectively.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.289-295
• /
• 2004

The objective of this study is to delineate removal efficiency of the MTBE in solution by $TiO_2$ photocatalytic degradation as a function of the following different experimental conditions: Initial concentration of MTBE, air flow rate in solution, $H_2O_2$ dosage and pH of the solution. Photodegradation rate was increased with decreasing initial concentration of MTBE. The removal efficiency was 82% after 180 min in the case of MTBE concentration of 100 mg/L but 100% after 180 min in the case of 20 mg/L. Removal efficiency was increased with increasing pH, $H_2O_2$ dosage and air flow rate in solution.

• 상하수도학회지
• /
• 제10권4호
• /
• pp.64-72
• /
• 1996

The effect of $O_3$, $O_3/pH$, and $O_3/H_2O_2$, $O_3/UV$, and $H_2O_2/UV$ advanced oxidation process(AOP) were investigated for the treatment of tetrachloroethylen(PCE) at various condition. The removal efficiency of 10, 20, and 30ppm PCE by ozonation were almost same, only about 60%. And pseudo first-order rate constants, ko for overall oxidation was about 0.097($min^{-1}$). In the $O_3/pH$ AOP experiment for the 20ppm PCE, the removal rate of PCE increased with the increase of pH. However, mineralization rate of PCE at pH 7 was higher than at pH 10. In the $O_3/H_2O_2$ AOP, the removal rate of PCE was the highest at peroxide-to-ozone dosage ratio of about 0.9, which PCE was removed over 99.95%. Despite 42% of PCE was directly photolyzed by the UV irradiation, the removal efficiency of PCE by $O_3/UV$ AOP was only about 70%. In $H_2O_2/UV$ AOP, the removal efficiency of PCE increased to about 98% in proportion to the $H_2O_2$ injection concentration at constant UV intensity of 5W/l.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.69-75
• /
• 2009

The characteristics of disinfection and organic removal were investigated with pulse UV lamp in this study. The intensity and emission wavelength of pulse UV Lamp were compared with low pressure UV lamp. The emission spectrum range of pulse UV lamp was between 200 and 400 nm while the emission spectrum of low pressure UV lamp was only single wavelength of 254nm. 3 Log inactivation rate of B. subtilis spore by pulse UV and low pressure UV irradiation was determined as $44.71mJ/cm^2$ and $57.7mJ/cm^2$, respectively. This results implied that wide range of emission spectrum is more effective compared to single wavelength emission at 254nm. 500ng/L of initial 2-MIB concentration was investigated on the removal efficiency by UV only and $UV/H_2O_2$ process. The removal efficiency of UV only process achieved approximately 80% at $8,600mJ/cm^2$ dose. 2-MIB removal rate of $UV/H_2O_2$ (5 mg/L $H_2O_2$) process was 25 times increased compared to UV only process. DOC removal efficiency for the water treatment plant effluent was examined. The removal efficiency of DOC by UV and $UV/H_2O_2$ was no more than 20%. Removal efficiency of THMFP(Trihalomethane Formation Potential), one of the chlorination disinfection by-products, is determined on the UV irradiation and $UV/H_2O_2$ process. Maximum removal efficiency of THMFP was approximately 23%. This result indicates that more stable chemical structures of NOM(Natural Organic Matter) than low molecule compounds such as 2-MIB, hydrogen peroxide and other pollutants affect low removal efficiency for UV photolysis. Consequently, pulse UV lamp is more efficient compared to low pressure lamp in terms of disinfection due to it's broad wavelength emission of UV. Additional effect of pulse UV is to take place the reactions of both direct photolysis to remove micro organics and disinfection simultaneously. It is also expected that hydrogen peroxide enable to enhance the oxidation efficiency on the pulse UV irradiation due to formation of OH radical.

• Membrane and Water Treatment
• /
• 제14권3호
• /
• pp.129-140
• /
• 2023

The appropriate injection of H₂O₂ is essential to produce hydroxyl radicals (OH·) by mixing H₂O₂ quickly and exposing the resulting H₂O₂ solution to UV irradiation. This study focused on evaluating mixing device of H₂O₂ as a design factor of UV/H₂O₂ AOP pilot plant using a surface water. The experimental investigation involved both experimental and model-based analyses to evaluate the mixing effect of different devices available for the H₂O₂ injection of a tubular hollow pipe, elliptical type of inline mixer, and nozzle-type injection mixer. Computational fluid dynamics analysis was employed to model and simulate the mixing devices. The results showed that the elliptical type of inline mixer showed the highest uniformity of 95%, followed by the nozzle mixer with 83%, and the hollow pipe with only 18%, after passing through each mixing device. These results indicated that the elliptical type of inline mixer was the most effective in mixing H₂O₂ in a bulk. Regarding the pressure drops between the inlet and outlet of pipe, the elliptical-type inline mixer exhibited the highest pressure drop of 15.8 kPa, which was unfavorable for operation. On the other hand, the nozzle mixer and hollow pipe showed similar pressure drops of 0.4 kPa and 0.3 kPa, respectively. Experimental study showed that the elliptical type of inline and nozzle-type injection mixers worked well for low concentration (less than 5mg/L) of H₂O₂ injection within 10% of the input value, indicating that both mixers were appropriate for required H₂O₂ concentration and mixing intensity of UV/ H₂O₂ AOP process. Additionally, the elliptical-type inline mixer proved to be more stable than the nozzle-type injection mixer when dealing with highly concentrated pollutants entering the UV/H₂O₂ AOP process. It is recommended to use a suitable mixing device to meet the desired range of H₂O₂ concentration in AOP process.