• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.1-7
• /
• 2015

The degradation of off-flavors which is 2-Methylisoborneol (2-MIB) and geosmin by means of ultrasound (US) and pulsed ultraviolet (PUV) irradiation and its combination with catalyst (wire mesh, wire mesh coated TiO₂, and TiO₂) and additive (H₂O₂) were investigated via water system. A combination treatment of TiO₂ and H₂O₂ heterogeneity with US (24 kHz) and PUV (6000 W) has shown improved results in destroying 2-MIB and geosmin, which may be attributed to chain reactions by the enhanced formation of hydroxyl radicals (·OH) through H₂O₂ dissociation and reactive oxide ions of TiO₂ addition. Rapid degradation of off-flavors occurred within 2 min under PUV process with H₂O₂ 100 mg/L (81.5% for 2- MIB; 79.3% for geosmin) and TiO₂ 100 mg/L (83.7% for 2-MIB; 79.8% for geosmin), while compared with H2O2 100 mg/L (58.4% for 2-MIB; 58.0% for geosmin) and TiO₂ 100 mg/L (59.2% for 2-MIB; 38.5% for geosmin) within 5 min under US process. Surprisingly, the emphasis was given on the comparison with the same injected energies between PUV and US on degradation efficiency. Based on the injected energy comparison, the US provided better degradation performance under equal input power of 200 kJ with H₂O₂ 100 mg/L, while compared with H₂O₂ 100 mg/L under PUV process. Our findings suggest that US can be more effective compared to PUV for the degradation of off-flavors in aspect of energy consumptions.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.61-66
• /
• 2001

양극산화법을 이용하여 광촉매 특성을 나타내는 $TiO_2$ 피막을 제조하고 염료의 분해반응을 통하여 광분해 효율을 조사하였다 양극산화법에 의해 제조된 산화피막은 모두 광촉매 분해특성이 있었으며 양극산화의 조건에 따라서 $TiO_2$ 피막의 성장거동과 피막 형태에 차이가 나타났다. 황산용액에서 양극산화된 $TiO_2$ 피막은 불규칙적 인 입자모양으로 anatase와 rutile이 혼합된 조직이었으며, 인산이 첨가된 혼합용액에서 형성된 $TiO_2$는 anatase로 셀 모양의 피막형태로 생성되었다. 광촉매 특성에 적합한 양극산화의 인가 전압은 180V인 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제13권1호
• /
• pp.17-20
• /
• 1992

Photoionization processes of TMPD in $H_2O$ and $D_2O$ were studied, by measuring steady-state absorption, emission, fluorescence excitation spectra, and fluorescence lifetimes on picosecond time scale. The steady-state absorption spectra showed that there exists a cation-ion pair (Wurster's Blue) in $H_2O$ and in $D_2O$ in the electronic ground state. Temperature and excitation wavelength dependence were also studied and the results show that the photoionization reaction in water is an activated process and the fluorescence lifetime is independent of the vibrational excess energy in the uv excitation range of 283-310 nm.

• 센서학회지
• /
• 제6권3호
• /
• pp.207-213
• /
• 1997

$H^{+}$ 이온에 선택적으로 감응하는 field effect transistor(pH-ISFET)를 바탕소자로 하고, 그 gate 주위에 Ag/AgCl 기준전극을 형성한 다음, 이를 둘러싼 수화젤(hydrogel)막 및 기체투과막의 이중막 구조를 가진 용존이산화탄소($CO_{2(aq)}$) 센서소자를 사진식각(photolithography)법으로 제작하였다. PVA-SbQ 혹은 PVP-PVAc/감광제 형의 광가교형 감광액은 수화젤막 형성에 적합하지 않았으나, 2-hydroxyethyl methacrylate(HEMA) 및 acrylamide를 포함하는 광중합형 감광액을 사용할 경우에는 사진식각법에 의한 수화젤막이 좋은 해상도로 얻어졌다. 기체투과막은 urethane acrylate계 UV-oligomer를 주성분으로 한 감광액을 써서 사진식각법으로 수화젤막위에 형성할 수 있었다. 또한 수화젤막 및 기체투과막을 사진식각법으로 형성할 때 N,N,N',N'-tetramethyl ethplenediamine(TED) 을 $O_{2}$ quencher로서 감광액 중에 도입함으로써 UV 노광시에 polyester film을 부착하는 번거로운 공정을 생략할 수 있음을 알았다. 이렇게 제조된 $pCO_{2}$ 센서는 수용액 중에서 $10^{-3}{\sim}10^{0}\;mol/{\ell}$의 $CO_{2}$ 농도변화에 대하여 직선적인 검정곡선(calibration curve)을 얻을 수 있었다.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.504-509
• /
• 1999

In-situ cleaning and subsequent silicon epitaxial film growth were performed in a load-locked reactor equipped with Hg-grid UV lamp and PBN heater to obtain the smooth and contaminant-free underlying surface and develop low-temperature epitaxial film growth process. The removals of organic and native oxide were investigated using UV-excited $O_2$ and $NF_{3}/H_{2}$, and the effect of the surface condition was examined on the quality of silicon epitaxial film grown at temperature as low as $750^{\circ}C$. UV-excited gas phase cleaning was found to be effective in removing the organic and native oxide successfully providing a smooth surface with RMS roughness of 0.5$\AA$ at optimal condition. Crystalline quality of epitaxial film was determined by smoothness of cleaned surface and the presence of native oxide and impurity. Crystalline defects such as dislocation loops or voids due to the surface roughness were observed by XTEM.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.284-288
• /
• 2005

In this study, photochemical advanced oxidation processes (AOPs) utilizing the Photo Fenton reaction ($Fe^{2+}+H_2O_2+UV$) were investigated in lab-scale experiments for the treatment of livestock wastewater. For the experimets, the livestock wastewater was pretreated by coagulation with $3,000mg/L\;FeCl_3$. The optimal conditions for Photo-Fenton processes were determined: pH was 5, the concentration of ferrous ion (Fe II) was 0.01 M. The concentration of hydrogen peroxide was 0.1 M, and molar ratio ($Fe^{2+}/H_2O_2$) was 0.1. The optimal reaction time was 80 min. Under the optimal condition of Photo-Fenton process, chemical oxygen demand (COD), color and fecal coliform removal efficiencies were about 79, 70, and 99.4%, respectively and sludge production was 7.5 mL from 100 mL of solution.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.102-105
• /
• 2012

The structural, electrical, and optical properties of layer-by-layer ZnO nanoparticles deposited using sol-gel spin coating technique were studied and now presented. Thicknesses of the thin films were varied by increasing the number of deposited layers. As part of our characterization process, XRD and FE-SEM were used to characterize the structural properties, current-voltage measurements for the electrical properties, and UV-Vis spectra and photoluminescence spectra for the optical properties of the ZnO thin films. ZnO thin films with thicknesses ranging from 14.2 nm to 62.7 nm were used in this work. Film with thickness of 42.7 nm gave the lowest resistivity among all, $1.39{\times}10^{-2}{\Omega}{\cdot}cm$. Photoluminescence spectra showed two peaks which were in the UV emission centered at 380 nm, and visible emission centered at 590 nm. Optical transmittance spectra of the samples indicated that all films were transparent (>88%) in the visible-NIR range. The optical band gap energy was estimated to be 3.21~3.26 eV, with band gap increased with the thin film thickness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.211-216
• /
• 1997

ZnO and A1$_2$O$_3$ powders were mixed in 1 : 1 mole ratio and ball-milled with ethanol for 3 h. After the pressing process, the mixtures were sintered at $700^{\circ}C$~130$0^{\circ}C$ for 5 h in air to form ZnA1$_2$O$_4$. Structural properties were analyzed by X-ray diffraction patterns ; optical properties by absorption spectra with UV-VIS-H[R Spectrophotometer ; microstructural properties by SEM ; photoluminescent properties by using PL Measuring System. In result, ZnAl$_2$O$_4$ phosphor is crystallized at 110$0^{\circ}C$ and optical bandgap is calculated at 4.65 eV. PL spectrums were shifted to longer wavelengths with increasing temperature and was appeared around 780nm at 130$0^{\circ}C$ . Additionally, the peak intensity was veil strong at 80$0^{\circ}C$ and was declined with increasing temperature.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.993-1001
• /
• 1997

The (0.8PPV+0.2DMPPV) copolymer and silica/borosilicate composites were synthesized by sol-gel process. The organic-inorganic hybrid solution was prepared by using of (0.8PPV+0.2DMPPV) copolymer precursor solution as a raw material for organic components and TEOS and TMB for glass components. Then by drying the solution in vacuum at 5$0^{\circ}C$ for 7days and subsequent heat treatment in vacuum at 15$0^{\circ}C$~30$0^{\circ}C$ for 2h~72h with heating rate of 0.2$^{\circ}C$/min and 1.8$^{\circ}C$/min, the organic-inorganic composites were synthesized. Microstructural evolution of the composites was characterized by DSC, IR spectrocopy, UV/VIS spectroscopy, and TEM. Elimination of the polymer precursor and degradation of the polymer were observed by DSC and Si-O and trans C=C absorption peaks were identified by IR spectra. The polymer was found to be successfully incorporated into the glass matrix and it was confirmed by the absorption peaks from the polymer in the UV/VIS spectra and the TEM results. The absorption peak of the composites was found to shift toward short wavelength side compared to that of the pure polymer and the amount of the blue shift increased with increasing the heat treatment temperature and heat treatment time and with decreasing the heating rate.

• Advances in environmental research
• /
• 제1권4호
• /
• pp.289-304
• /
• 2012

Tris (2-methyl-1-aziridinyl) phosphine oxide (MAPO) is extremely poisonous and persistent in aqueous media. An efficient UV/nano$TiO_2$ process was employed for its mineralization in a high duty falling film photo-reactor based on an experimental design scheme that considers interactions between the main variables. The influencing variables and their range were determined with preliminary studies. The results show substrate mineralization to some extent under mild conditions of: T = $30^{\circ}C$, pH = 8.5, $[MAPO]_0=60\;mg\;L^{-1}$ and $[TiO_2]=110\;mg\;L^{-1}$. The relative importance of the influencing parameters were initial pH > temperature > $[MAPO]_0$ > [$TiO_2$]; while the interdependence of all the parameters was significant. Accordingly, a reduced quadratic expression was developed. Meanwhile, mineralization kinetic studies, based on chemical oxygen demand, revealed a power law model with order of 2.6 during process time until 150 min.