• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.138-140
• /
• 2007

$TiO_2-V_2O_5$ sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mo1e, 0.03mo1e, 0.05mo1e into $TiO_2$ sol. Viscosity of sol increased fast from about 1,000 minutes and sol began gelation from about 10,000 minutes. As a results of crystalline properties, $V_2O_5$ peaks were not found despite of $V_2O_5$ addition. Endothermic reaction occurred due to evaporation of solvent and dissociation of OH at $80^{\circ}C$. Exothermic reaction occurred due to combustion and oxidation of solvent at $230^{\circ}C$, occurred to combustion and oxidation of alkyl group at $350^{\circ}C$. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping.

• 한국환경과학회지
• /
• 제30권6호
• /
• pp.501-505
• /
• 2021

V₂O₅-TiO₂ catalysts were prepared by various methods. V₂O₅-TiO₂ were prepared by sol-gel method with different drying conditions (aerogel and xerogel), and V₂O₅ supported on TiO₂ obtained by sol-gel method with precipitation-deposition method and impregnation method. The performance of the V₂O₅-TiO₂ catalysts was investigated for the selective oxidation of hydrogen sulfide in the stream containing both ammonia and excess water. All the catalysts showed good dispersion of vanadium and they had high H₂S conversion with no or little production of sulfur dioxide. The V₂O₅-TiO₂ aerogel catalyst prepared by sol-gel method with drying under super critical condition had the highest surface area which led to better catalytic activity compared to those by other synthesis methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.161-163
• /
• 2008

$TiO_2-V_2O_5$ sol was fabricated using sol-gel method and $TiO_2-V_2O_5$, thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mole, 0.03mole, 0.05mole into $TiO_2$ sol. Capacitance of thin films decreased with increasing $V_2O_5$ additive and it increased largest at 0.01mole. Because adsorption time and desorption time of thin films was about 2 minutes 40 seconds and about 3 minutes 40 seconds respectively, adsorption time was faster about 1 minutes than desorption time.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1255-1260
• /
• 2007

[ $TiO_2-V_2O_5$ ] sol was prepared using sol-gel method. Sol changed to gel with hydrolysis and polymerization. DTA properties of gel powder had endothermic reaction due to evaporation of propanol about $80^{\circ}C$, had exothermic reaction due to combustion of propanol about $230^{\circ}C$ and had exothermic reaction due to combustion of alkyl group about $350^{\circ}C$. Crystalline properties of gel powder retained amorphous phase at $50^{\circ}C$, retained anatase phase from $400^{\circ}C\;to\;600^{\circ}C$ and had all rutile phase over $700^{\circ}C$ at 0.01mole $V_2O_5$ additive. The capacitance of thin films increased with increasing heat treatment temperature and thin films had best properties at $700^{\circ}C$. The capacitance of thin films increased a lot with decreasing measurement frequency.

• 센서학회지
• /
• 제4권3호
• /
• pp.15-21
• /
• 1995

본 논문은 졸겔법에 의해 $TiO_{2}-V_{2}O_{5}$ 습도센서를 제조하고, 미세구조 및 결정구조를 분석하여 습도감지특성이 뛰어난 최적 제조조건을 찾았다. 그레인 크기는 $Ti^{4+}$ 사이트에 치환되는 $V^{5+}$비에 비례하여 증가하였다. X-선 회절분석 결과, $V_{2}O_{5}$비에 관계없이 $V^{5+}$피크는 확인할 수 없었다. 실험결과로부터 $V_{2}O_{5}$비가 1mol%, 열처리온도가 $700^{\circ}C$일때 가장 우수한 습도감지특성을 나타내었다. 시편의 정전용량은 주파수가 증가할수록 감소하였다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1012-1016
• /
• 2008

[ $TiO_2-V_2O_5$ ] sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mole, 0.03mole, 0.05mole into $TiO_2$ sol. As a results of crystalline properties, $V_2O_5$ peaks were not found in spite of $V_2O_5$ additive. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping. Capacitance of thin films increased with increasing heat treatment temperature and it increased largest at $700^{\circ}C$. Capacitance of thin films decreased with increasing $V_2O_5$ additive and it increased largest at 0.01mole. Because adsorption time and desorption time of thin films was about 2 minutes 40 seconds and about 3 minutes 40 seconds respectively, adsorption time was faster about 1 minutes than desorption time.

• 청정기술
• /
• 제14권3호
• /
• pp.204-210
• /
• 2008

비가수분해 솔-젤법에 의하여 여러 가지 조성의 $V_{2}O_{5}-TiO_2$ 촉매를 합성하여 특성분석을 실시하고 황화수소의 선택 산화반응에 대한 촉매성능을 고찰하였다. 이 $V_{2}O_{5}-TiO_2$ 촉매는 높은 표면적을 가지고 VOx가 작은 입자로 잘 분산되어 있었고, 환원성도 우수한 것으로 나타났다. 그러나 12 wt% 이상의 바나디아 담지량부터는 결정성 $V_{2}O_5$가 관찰되어 $H_{2}S$의 전환율을 감소시키는 결과를 초래하였다. 이 방법으로 제조된 $V_{2}O_{5}-TiO_2$ 촉매는 통상의 제로젤(xerogel) 촉매나 함침 촉매에 비해 높은 반응활성을 보여 주었고, 암모니아와 물이 포함된 조건에서도 황화수소를 선택 산화시켜 이산화황을 거의 발생시키지 않고 환경 친화적이고 안전한 물질인 원소 황(sulfur)과 티오황산암모늄(ATS)으로 회수할 수 있었다.

• 공업화학
• /
• 제7권2호
• /
• pp.269-279
• /
• 1996

SOL-GEL법을 이용하여 $SiO_2-TiO_2-V_2O_5$계의 다공성 비정질 촉매를 그 제조변수를 달리하면서 제조 하였다. 이들 촉매들을 사용하여 "모조 배가스 합성 및 미량 촉매 반응기" 상에서 NO 제거 활성 측정을 통한 Screening test를 실시하여 가장 우수한 촉매 활성을 나타내는 최적의 입자상 촉매를 선정하였다. 또, 입자상 촉매의 제조변수에 입각하여 비활성, 기통성이 우수한 cordierite monolith 담체위에 활성성분을 SOL-GEL법으로 반복 coating하여 monolith형 촉매들을 제조하였으며, 이들을 전형적인 S. C. R.(Selective Catalytic Reduction of NOx) 공정에 해당되는 반응 조건하에서 NOx 및 SOx의 동시제거 효과를 측정해 보았다. 아울러 동촉매들의 특성화를 위해 DTA, TGA, BET, $NH_3$ 및 NO TPD, ESCA, XRD 등을 실시하여 보았다.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.327-331
• /
• 2009

Nano-porous $TiO_2$ powder was fabricated using Acetylene black, applied photo voltaic device based on the Dye-sensitized Solar Cells (DSCs) was investigated experimentally. $TiO_2$-powder was fabricated using Ti-isopropoxide and 2-propanol by sol-gel combustion method. For cases of variable Acetylene black, characteristic of porosity, size of particle and crystallite of obtained $TiO_2$ nano-powder was investigated. The photovoltaic efficiency of the prepared DSCs was measured using $TiO_2$ film which prepared on each different heat treatment temperature($400^{\circ}C{\sim}700^{\circ}C$) with paste of $TiO_2$ powder. The porosity and size of particle of $TiO_2$ powder made with Acetylene black 0.4g was influenced significantly effect to DSCs characteristic. Heat treatment at $500^{\circ}C$ makes the better photovoltaic efficiency which 5.02%($J_{sc}=11.79mA/cm^2$, $V_{oc}=0.73V$, ff=0.58). The sol-gel combustion method was useful to DSCs fabrication.

• 공업화학
• /
• 제32권6호
• /
• pp.599-606
• /
• 2021

본 연구는 질소산화물 제거를 위하여 암모니아를 환원제로 사용하는 선택적 촉매 환원법에 있어 지지체에 셀레늄을 첨가하여 300 ℃ 이하에서 V₂O₅/WO₃/TiO₂의 반응 활성을 증진시키기 위한 실험 및 반응특성 연구를 수행하였다. 졸-겔법으로 Se-TiO₂ 및 TiO₂를 합성하였으며, 이를 지지체로 하여 V₂O₅/WO₃/TiO₂ 및 V₂O₅/WO₃/Se-TiO₂ 촉매를 제조하여 상용 촉매와 반응 활성을 비교하였다. 실험 결과, 졸-겔법으로 합성한 TiO₂를 사용한 촉매의 탈질 효율이 상용 TiO₂를 사용하여 제조한 촉매보다 낮은 결과를 보였으나 셀레늄을 첨가함에 따라 탈질 효율이 증진되었다. 따라서 BET, XRD, Raman, H₂-TPR 및 FT-IR분석을 통하여 셀레늄의 첨가가 촉매의 구조에 미치는 영향을 분석하였으며 셀레늄 첨가에 의한 비표면적의 증가와 단량체 및 복합체 바나듐 종의 형성이 반응 특성에 미치는 영향을 확인하였다.