• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1147-1155
• /
• 1996

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.109-118
• /
• 1996

Al$_2$O$_3$-TiO$_2$powders of six different compositions were plasma-sprayed on Ti substrate. The spray powders and the spray coated layers were analysed and compared using SEM and X-RD. The elastic properties (specific elastic constant and damping coefficient) of the coated specimens were measured in order to select the optimum composition range of ceramics for use in a speaker diaphragm. A correlation between the microstructure and elastic properties was also investigated. When $Al_2$O$_3$powders with 0- 13% TiO$_2$were plasma sprayed, the coated layers were composed of metastable y-Al$_2$O$_3$with small amount of $\alpha$-Al$_2$O$_3$and the content of $\alpha$-Al$_2$O$_3$was increased with TiO$_2$content. Specific elastic constant was rapidly increased with 2 and 13% TiO$_2$addition to $Al_2$O$_3$. The internal damping was nearly unchanged with TiO$_2$content The specific elastic constant seemed to be dependent on the content of $\alpha$-Al$_2$O$_3$in the coated layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.5-8
• /
• 2004

전자빔 증착법 (e-beam evaporation)를 이용하여 $TiO_2$ 박막과 $Al_2O_3/TiO_2$ 이중박막을 제조한 후, $800^{\circ}C$ 공기 중에서 열처리하여, 알루미나 층의 유무에 따른 두 박막의 전기전도 특성과 100 ppm CO 가스에 대한 반응 특성을 고찰하였다. 알루미나 층이 증착되지 않은 순수한 $TiO_2$ 박막의 전기 전도도 (in dry air)는 $100^{\circ}C-500^{\circ}C$ 온도범위에서 온도가 증가함에 따라 증가하였으며 알루미나 층이 증착된 $Al_2O_3/TiO_2$ 이중막보다 높은 전도도를 나타내고 있으나, 약 $300^{\circ}C$이상의 온도에서는 $Al_2O_3/TiO_2$ 이중막의 전기 전도도가 급격히 증가하여 $TiO_2$ 박막의 전기전도도 보다 더 높은 값을 나타내었다. 또한 온도에 따른 CO 가스 감도(sensitivity)는 $TiO_2$ 박막의 경우 $400^{\circ}C$까지는 서서히 증가하여 그 이상의 온도에서 급격히 감소하였으나, $Al_2O_3/TiO_2$ 이중막은 $250^{\circ}C$에서 감도가 급격히 증가하여 최대값을 나타내었으며, $350^{\circ}C$에서 감도가 급격히 감소하는 특성을 나타내었다.

• 한국결정성장학회지
• /
• 제19권4호
• /
• pp.202-207
• /
• 2009

본 연구에서는 $Fe/Al_2O_3$ 및 $Fe/TiO_2$계 나노복합분말을 제조하기 위하여 실온 기계적 합금화법(MA)을 적용하였다. $Fe_3O_4-M$(M= AI, Ti)이고 여기서 순금속 Al 및 Ti은 고상반응 시 환원제로서 선택하였다. $Fe_3O_4$-순금속의 각각 25시간 및 75시간 MA 처리한 결과 $Fe/Al_2O_3$ 및 $Fe/TiO_2$ 나노복합분발이 얻어졌으며, 이것은 나노결정립의 ${\alpha}$-Fe 기지에 $Al_2O_3$ 및 $TiO_2$가 각각 미세하게 분산된 나노복합분말임을 알 수 있었다. 또한 Fe$_3$O$_4$-AI계에서 보다 짧은 반응 시간에 복합분말이 생성되는 것은 $Fe_3O_4$의 Al에 의한 환원반응 시 큰 반응열에 기인하는 것으로 사료된다. MA법으로 제조된 $Fe/TiO_2$ 복합분말의 X선 회절분석으로부터 ${\alpha}$-Fe 결정립 크기는 30 nm 임을 알 수 있었다. 또한 MA 과정 중 시료의 자기 측정으로부터 $Fe_3O_4$의 순금속 Al 및 Ti 에 의한 고상환원반응 과정을 자세히 관찰할 수 있었다.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.552-560
• /
• 1994

A composite of TiB2-Al2O3 system was successfully prepared from a mixture of TiO2, B2O3, and Al by self-propagating high temperature synthesis (SHS) with a novel characteristic, utilizing the internal oxidation heat of aluminium metal of the mixture, instead of by a conventional technique, externally heating a mixture of Ti, B and Al2O3. From a mixture with B/Ti molar ratio of =2.0, pure two phases of TiB2 and $\alpha$-Al2O3 with good crystallinity and small, uniform sizes were formed. However, when the B/Ti molar ratio of the mixture goes to a value less than 2.0, in addition to the above main minerals, a small smounts of metastable phases such as TiB and Ti3B4 were formed. It was found that about 60%, the optimum green density of compacts gave their highest reaction rate and temperature during SHS process. TiB2-Al2O3 system composite with B/Ti molar ratio of =2.0 could be pressurelessly sintered even at 190$0^{\circ}C$ under Ar gas flows without any addition of sintering aids, showing their good properties such as 91.2% in relative density, 2750 kgf/$\textrm{mm}^2$ in Vickers hardness and 2620 kgf/$\textrm{cm}^2$ in flexural strength.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.40-46
• /
• 2001

A1₂TiO/sub 5/ 세라믹스의 열적 안정성은 MgO와 고온 arc용융노에서 MgAl₂O₄ spinel과 같은 고용체를 이루고, SiO₂, ZrO₂와 α-Al₂O₃등의 첨가제로 입자크기와 미세 균열을 감소시킴으로서 증가시킨다. A1₂TiO/sub 5/ 세라믹스의 낮은 열팽창 특성은 상이한 열팽창으로 hysteresis 곡선을 나타내며 이 현상은 미세균열의 opening과 closing으로 설명된다. 이들의 열팽창 곡선, 소성온도에 EK른 관계를 dilatometer로 연구하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1763-1770
• /
• 2007

Strong solid acid catalysts, NiO/Al2O3-TiO2/WO3 for ethylene dimerization were prepared by the addition of Al2O3 and the modification with WO3. The acid sites and acid strength were increased by the inductive effect of WO3 species bonded to the surface of catalysts. The larger the dispersed WO3 amount, the higher both the acidity and catalytic activity for ethylene dimerization. The addition of Al2O3 to TiO2 up to 5 mol% enhanced acidity and catalytic activity gradually due to the interaction between Al2O3 and TiO2 and consequent formation of Al-O-Ti bond.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1138-1146
• /
• 1996

Al2TiO5 powder was prepared by the sol-gel processing from th metal alkoxides ; aluminium sec-butoxide (Al(OC4H9)3 and tetraethyl orthotitanate (Ti(OC2H5)4) The particles of Al2TiO5 produced from alkoxides were measured to be below $1.5mutextrm{m}$ and mre than 90% weere below 1 ${\mu}{\textrm}{m}$ however those from commercial alumina and titania were over 0.5-7${\mu}{\textrm}{m}$ and only 60% were below 1${\mu}{\textrm}{m}$ and 90% were below 2.5${\mu}{\textrm}{m}$ Therefore Al2TiO5 powder produced from alkoxides had the narrower distributionin size than that produced from the commercial alumina and titania powders. The addition of mullite or Al2O3 powder to the prepared aluminum titanate inhibited the grain growth and this resulted in decreased and increase in density.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.764-768
• /
• 2006

For the possible application of pearl pigment, multi-layered $TiO_2/Al,\;Cr/TiO_2$ thin film were deposited on $SiO_2$ substrate by using sputtering method, $TiO_2$ and Al or Cr was selected as a possible high and low refraction material at the film interface respectively. Optical properties including color effect were systematically studied in terms of different film thickness and film layers by using spectrometer. In order to expect the experimental results, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. The film consisting of $TiO_2/Al,\;Cr/TiO_2$ layers shows a wavelength range of $430{\sim}760nm$, typically color ranges between bluish purple and red. It was confirmed that this experimental result was quite well consistent with the experimental one.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.498-502
• /
• 2010

Aluminium titanate($Al_2TiO_5$) has extremely anisotropic thermal expansion properties in single crystals, and polycrystalline material spontaneously microcracks in the cooling step after sintering process. These fine intergranular cracks limit the strength of the material, but provide an effective mechanism for absorbing strain energy during thermal shock and preventing catastrophic crack propagation. Furthermore, since machinable BN-ceramics used as an insulating substrate in current micro-electronic industry are very expensive, the development of new low-cost machinable substrate ceramics are consistently required. Therefore, cheap $Al_2TiO_5$-machinable ceramics was studied for the replacement of BN ceramics. $Al_2O_3-Al_2TiO_5$ ceramic composite was fabricated via in-situ reaction sintering. $Al_2O_3$ and $TiO_2$ powders were mixed with various mol-ratio and sintered at 1400 to $1600^{\circ}C$ for 1 h. Density, hardness and strength of sintered ceramics were systematically measured. Phase analysis and microstructures were observed by XRD and SEM, respectively. Machinability of each specimens was tested by micro-hole machining. The results of research showed that the $Al_2TiO_5$-composites could be used for low-cost machinable ceramics.