• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.226-231
• /
• 2018

F-containing $TiO_2$ nanopowders are synthesized using simple wet processes (precipitation-based and hydrothermal) from ammonium hexafluorotitanate (AHFT, $(NH_4)_2TiF_6$) as a precursor to apply as a photocatalyst for the degradation of rhodamine B (RhB). The surface properties of the prepared samples are evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). The results confirm that the synthesized anatase $TiO_2$ has sphere-like shapes, with numerous small nanoparticles containing fluorine on the surface. The photocatalytic activity of F-containing $TiO_2$ compared with F-free $TiO_2$ is characterized by measuring the degradation of RhB using a xenon lamp. The photocatalytic degradation of F-containing $TiO_2$ exhibits improved photocatalytic activity, based on the positive effects of adsorbed F ions on the surface.

• 공업화학
• /
• 제24권3호
• /
• pp.231-238
• /
• 2013

본 연구에서 제조한 나노구형체 $TiO_2$는 자외선 차단 효과가 우수하면서도 노폐물 흡착을 하는 기능을 부여하기 위해 Sol-gel 방법으로 합성하였다. 다공성의 특성으로 높은 표면적에 의한 우수한 자외선 차단효과 및 흡착능력을 얻기 위해 pH를 조절하였다. 염기 처리한 $TiO_2$의 경우 가장 우수한 특성을 나타내었다. TGA로 글리세린을 흡착한 결과 1.16 mg의 높은 흡착 결과를 얻을 수 있었다. 또한 UV-A 영역에서 높은 반사율을 가지는 것을 확인하였다. 무기분체의 최적의 분산제를 찾기 위해 ester oil과 silicon oil를 사용하여 입도크기를 측정하였으며 180 nm정도의 입자로 약 6개월간 유지되었다. 이 결과를 통해, UV-A영역에서 우수한 능력을 가진 자외선 차단제로서 노폐물 흡착능력을 가진 $TiO_2$를 제조했으며 이로 인한 다양한 응용이 가능할 것으로 기대된다.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.11-19
• /
• 1992

$SrTiO_3$미분말은 초음파 분무 열분해법으로 chloride와 nitrate 수용액을 출발용액으로 사용하여 농도를 0.05M과 0.1M로 하였으며 각 농도에 따른 유속의 변화를 0.5cm/sec로 변화시켜 합성하였다. 분말의 형성 과정은 0.05M, 0.05cm/sec 조건에서 단계별 분말을 합성하여 주로 morphorlogy 측면에서 고찰하였다. 출발용액이 chloride 수용액인 경우 SrTiO$_3$미분말을 합성할 수 없었으며 nitrate 수용액인 경우 모든 조건에서 (110)면을 주 peak로 하는 cubic의 순수한 구형의 $SrTiO_3$미분말을 얻을 수 있었다. 평균입자의 크기는 유속이 증가함에 따라 $0.49{\mu}m$에서 $0.55{\mu}m$로 증가하였다. 출발액적의 크기는 $14.3{\mu}m$이었으며 단계별 입자의 형태는 1, 2단계에서 용매의 증발에 의해 매우 porous하였으며 불규칙하였고, 3, 4, 5단계를 지나는 동안 점차 둥근 형태로 형성되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.99-99
• /
• 2010

Polymer nanocomposite has been attracting much attention as a new insulation material, since homogeneous dispersion of nm-sized inorganic fillers can improve various properties significantly. In this paper, various kinds of epoxy based nanocomposites were made and AC breakdown strength of Nano-TiO2 and micro-silica filler mixture of epoxy based composites were studied by sphere to sphere electrode. Moreover, nano- and micro-filler combinations were adopted as an approach toward practical application of nanocomposite insulation materials. Nano-TiO2 particle size is about 10nm and composites ratio was resin (100) : hardener (82) : accelerator (1.5). AC breakdown test was performed at room temperature (25 [$^{\circ}C$], 80 [$^{\circ}C$] and 100 [$^{\circ}C$] in the vicinity of Tg (90[$^{\circ}C$]). And thermal conductivity were measured by ASTM-D5470.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.13-20
• /
• 2003

This study was carried out to investigate the effect of surface modified pigments on the properties of coated paper. The selected core particle(clay, talc) and fine particle(TiO$_2$) were modified by hybridization. The optical properties of modified pigments, rheological properties of coating color, and optical properties of coated paper were investigated. It was found that particles formed sphere-like shape and became more uniform during the surface modification in the hybridization system. As a result, It was estimated that surface modification of TiO$_2$ turned out to be more effective in improving optical properties of pigment and coated paper than simply blending it.

• 한국광학회지
• /
• 제15권6호
• /
• pp.547-554
• /
• 2004

z-축 방향으로 진행하는 Ti:LiNbO$_3$, 광도파로와 전기광학효과를 이용하여 집적광학형 편광조절기를 구현하였다. 소자는 λ/4-λ/2-λ/4 wave-plate들로 구성되었으며, 각 wave-plate에 인가되는 전압들에 따라 나타나는 위상변화량과 이에 대응되는 편광모드 변환을 정량적으로 검토하고, 폴래리미터 (polarimeter)와 Poincare 구 좌표계를 이용하여 편광 조절기의 동작 상태를 체계적으로 측정하였다. 제작된 편광조절기는 각 wave-plate들의 선택과 인가전압에 따라 어떠한 입력 편광 상태도 특정한 출력 편광상태로 변화시킬 수 있음을 확인하였다.

• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.329-334
• /
• 2002

아나타제형 $TiO_2$, 분말과 $Ca(OH)_2$ 분말을 출발물질로 하여 광화제로 KOH 및 NaOH를 각각 첨가한 후, 오토클레이브 내에서 수열반응시켜 perovskite구조를 갖는 $CaTiO_3$, 분말을 제조하였다. $CaTiO_3$, 분말 합성 시 광화제의 종류 및 농도에 따른 결정상 변화와 입자 형상 및 크기를 고찰한 결과, 광화제로 1 N KOH 용액을 사용한 경우, 약 0.7$\mu$m 크기의 구형입자가 합성되었고, 10 N KOH 용액을 사용한 경우, 3 $\mu$m 정도의 육면체형 입자로 합성되었다. 광화제인 KOH 농도가 증가함에 따라 구형입자로부터 육면체형 입자로 형상이 변화되었으며, 입자의 크기도 증가하였다. 1 N NaOH 용액을 광화제로 사용한 경우에는 0.5~1 $\mu$m 정도의 구형입자가 합성되었고, 10 N NaOH 용액을 사용한 경우에는 1~4 $\mu$m 정도의 육면체 형상을 갖는 입자와 10$\mu$m 이상인 휘스커형 입자가 혼합된 형상으로 합성되었다. KOH 광화제와 마찬가지로 NaOH 광화제의 농도가 증가함에 따라 육면체 및 휘스커 형상을 갖는 입자로 변화하였으며, 입자의 크기도 아울러 증가하였다. 성분 분석 결과 휘스커 형상의 입자의 경우에는 육면체형 입자에서 관찰된 sodium성분이 검출되지 않았다.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.217-221
• /
• 2011

Glass-ceramic materials, which consist of glass matrix phase containing crystalline ${\beta}-Ca_3(PO_4)_2$ and ${\beta}-Ca_2P_2O_7$, have been prepared by heating at $750-900^{\circ}C$ of calcium phosphate invert glasses in the silica-free $CaO-P_2O_5-TiO_2-Na_2O$, system. With increasing heating temperature from 750 to $900^{\circ}C$, the crystallite size of precipitated ${\beta}-Ca_3(PO_4)_2$ in glass with $55CaO{\cdot}35P_2O_5{\cdot}3TiO_2{\cdot}7Na_2O$ (mol%) composition increased from 48 to 91 nm. With the extension of the immersion time in dilute acetic acid solution (pH = 5) to ${\geq}$200 min, the degree of dissolution of $Ca^{2+}$ and $P^{5+}$ ions in the glass-ceramics was linearly increased and the solution was constantly maintained at pH = ~7. Biomimetic nanostructured (62-88 nm in average dia.), sphere-shaped hydroxyapatite was homogeneously formed on the surface of the glass-ceramics when socked for 7-14 days in a Hanks' solution, indicating bioactivity of the prepared glass-ceramics.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• 한국수소및신에너지학회논문집
• /
• 제12권1호
• /
• pp.39-50
• /
• 2001

Vanadium based solid solution alloys have been studied as a potential negative electrode of Ni/MH battery due to their high hydrogen storage capacity. In order to improve the kinetic property of V-Ti alloy in KOH electrolyte, the ball-milling process with Ni, which has a catalytic effect of hydrogen absorption/desorption, was carried out to modify the surface properties of V-Ti-Cr alloys with high hydrogen storage capacity. Moreover, to overcome the problem of poor cycle life, V-Ti alloy substituted by Cr, V0.68 Ti0.20 Cr0.12, has been developed showing a good cycle performance (keeping about 80 % of initial discharge capacity after 200 cycles). The cycle life of surface-modified V0.68 Ti0.20 Cr0.12 alloy was improved by suppressing the formation of TiO2 layer on the alloy surface while decreasing the amount of dissolved vanadium in the KOH electrolyte. In order to promote the effect of Ni coating on the surface property of V0.68 Ti 0.20 Cr 0.12 alloy by ball-milling, filamentary-typed Ni, which has higher surface coverage area than sphere-typed Ni was used as a surface modifier. Consequently, the surface-modified V0.68 Ti0.20 Cr0.12 alloy electrode showed a improved discharge capacity of 460 mAh/g.