• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.966-970
• /
• 2004

Electrophoretic display has recently stimulated tremendous interest due to potential commercialization in the filed of information displays including e-books, e-newspapers, and other low-power portable displays. A new transparent soft mold press (TSMP) process developed in this study was found to give a good electrophoretic display panel with prepatterned micropools for the filling of charged particle slurry. It was also found that charged $TiO_2$ particles with 74.09 mV of zeta potential and 3.11 ${\times}$ $10^{-5}$ $cm^2$/Vs of mobility were successfully prepared.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.547-553
• /
• 2011

We investigated the dielectric and mechanical properties of ceramic polymer composite xBNT - (1-x)LCP (x= 0, 10, 20, 30, 40 vol.%). The disk shaped BNT ($BaNd_2Ti_4O_{12}$) - LCP (liquid crystal polymer) composite samples were prepared by compression molding method. With increasing the BNT content in composites from 10 to 40 vol.%, the dielectric constant increased but the dielectric loss as well as bending strength of composites reduced. These composites were well described with modified Lichtenecker's model having k = 0.392 and 0.303 for the first and second ball milled BNT filled composites, which means that the BNT filler in composites are well dispersed. The dielectric constant of the composite comprised of the second milled BNT ($D_{50}$ = 1.39 um) was higher that of the composite of the first milled BNT ($D_{50}$= 2.45 um), which seems to be related with the different particle size and dispersion of BNT fillers in LCP matrix. The bending strength of the composite containing the second milled BNT was superior to that of the composite of the first milled BNT.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2582-2590
• /
• 2021

The high-energy milling is one of the most extended techniques to produce Oxide dispersion strengthened (ODS) powder steels for nuclear applications. The consequences of the high energy mill process on the final powders can be measured by means of deformation level, size, morphology and alloying degree. In this work, an ODS ferritic steel, Fe-14Cr-5Al-3W-0.4Ti-0.25Y₂O₃-0.6Zr, was fabricated using two different mechanical alloying (MA) conditions (M_std and M_act) and subsequently consolidated by Spark Plasma Sintering (SPS). Milling conditions were set to evidence the effectivity of milling by changing the revolutions per minute (rpm) and dwell milling time. Differences on the particle size distribution as well as on the stored plastic deformation were observed, determining the consolidation ability of the material and the achieved microstructure. Since recrystallization depends on the plastic deformation degree, the composition of each particle and the promoted oxide dispersion, a dual grain size distribution was attained after SPS consolidation. M_act showed the highest areas of ultrafine regions when the material is consolidated at 1100 ℃. Microhardness and small punch tests were used to evaluate the material under room temperature and up to 500 ℃. The produced materials have attained remarkable mechanical properties under high temperature conditions.

• 공업화학
• /
• 제16권3호
• /
• pp.385-390
• /
• 2005

본 연구에서는 seed sol 부가법을 통해 나노 사이즈의 콜로이달 Ag를 제조하였다. 제조된 콜로이달 Ag 용액은 hybridizer system과 spray nozzle을 통하여 제지용 무기안료 표면에 분사한 후 이산화티탄으로 표면개질하여 기능성 항균 복합 분체를 제조하였다. 나노 사이즈의 콜로이달 Ag 제조에 있어 $AgNO_3$의 첨가와 시간의 경과에 따라 흡수도가 커지는 것으로 단위 중량당 입자의 크기가 커짐을 확인할 수 있었다. 제조된 기능성 무기안료의 항균성 측정은 균들의 해당 균주에서 시간이 증가함에 따라 균의 성장이 억제되는 결과를 나타내었고 항균접종 실험 실시 후 5~7 h 안에 항균성이 발현되면서 일정한 시간 범위 내에서의 항균력이 우수한 것으로 측정되었다. 또한 $TiO_2$의 광촉매 효과 측정 결과 benzene의 광분해 효율실험에서 반응시간 80 min 동안 60~70% 정도의 효율을 보였고, 반응시간 30 min 정도에서 이미 달성한 분해효율이 90% 이상에 도달해 있음을 알 수 있었다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.489-494
• /
• 2013

Nano-sized titanium oxide powders were synthesized by a polymer matrix technique using pulp and Titanium tetraisopropoxide (TTIP) as starting materials. The synthesized powders were characterized by XRD and FE-SEM. The particle size of the powders was controlled by preparation conditions, such as heat treatment temperature and time. After investigating various drying and heat treatment conditions, 50-100 nm sized homogeneous titanium oxide particles were obtained by treating at $600^{\circ}C$ for 1 h. The crystallization and rapid growth of particles was accelerated by increasing heat treatment temperature and time. Anatase phase generated below $600^{\circ}C$ transformed to the rutile phase with increasing heat treatment temperature. Moreover, above $800^{\circ}C$, heat treatment time had a very large influence on particle growth, and changing the heating condition also had a large influence on crystal growth.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.483-489
• /
• 2020

미세먼지는 머리카락 두께의 약 1/5 수준인 PM10(입자의 지름 10㎛이하)과 PM2.5(입자의 지름 2.5㎛이하)로 구분되며, 인체에 미치는 영향으로 폐질환, 혈관을 통한 동맥경화 및 심장 질환 등 각종 질병을 유발하는 발암물질로 알려져 있다. 이러한 미세먼지의 주요 원인은 도심지 도로변에서 발생되는 약 57.3%가 자동차에서 배출되는 이산화질소(NOx)로 알려져 있다. 이에 본 연구에서는 도로이동오염원에서 발생하는 NOx를 저감하기 위한 기능성 건설재료 개발의 일환으로 시멘트를 다공성 소재로 치환한 시멘트 모르타르의 치환율에 따른 NOx저감성능 비교 평가를 실시하였다. 또한 시멘트 모르타르의 광촉매 적용방법 및 도포 횟수에 따른 NOx저감성능을 비교 평가하였다. 실험결과 활성황토를 30% 치환하여 사용한 경우 약 32.7%의 저감효과를 나타내 가장 우수한 저감성능을 갖는 것으로 나타났다.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.132-136
• /
• 2017

We synthesized potassium hexatitanate, ($K_2Ti_6O_{13}$, PT6), with a non-fibrous shape, by acid leaching and subsequent thermal treatment of potassium tetratitanate ($K_2Ti_4O_9$, PT4), with layered crystal structure. By controlling nucleation and growth of PT4 crystals, we obtained splinter-type crystals of PT6 with increased width and reduced thickness. The optimal holding temperature for the layered PT4 was found to be ${\sim}920^{\circ}C$. The length and width of the PT4 crystals were increased when the nucleation and growth time were increased. After a proton exchange reaction using aqueous 0.3 M HCl solution, and subsequent heat treatment at $850^{\circ}C$, the PT4 crystal transformed into splinter-type PT6 crystals. The frictional characteristics of the friction materials show that as the particle size of PT6 increases, the coefficient of friction (COF) and wear amounts of both the friction materials and counter disc increase.

• 공업화학
• /
• 제18권1호
• /
• pp.17-23
• /
• 2007

제지용 무기안료에 항균기능과 광촉매 탈취기능을 부여하기 위해 hybridization system을 이용하여 Ag 용액과 $TiO_2$로 표면 개질 처리하여 기능성 무기안료를 제조하고, 이를 이용하여 항균 및 탈취 기능을 갖는 특수지를 제조한 후 내항균 특성을 평가하였다. 내항균 평가로는 균의 생성여부를 눈으로 직접 확인 할 수 있는 halo test법, 균들의 생육 저하효과를 확인하는 방법인 inhibition growth test와 정균감소법을 사용하였다. 또한 제조된 항균기능성 특수지를 벽지용도로 적용하고자 하였으며, 내항균 평가 시 항균벽지 주위로 선명한 클리어 존이 형성되어 균의 성장 억제를 육안으로 확인할 수 있었다. 항균 및 탈취기능을 지니는 특수지의 휘발성 유기화합물 분해능 평가를 위한 benzene의 광촉매 분해 효율실험에서 반응시간 80min 동안 45~50%의 제거효율을 보였으며, 반응시간 30 min 정도에서 분해효율이 90% 이상 도달함을 알 수 있었다.

• 전기화학회지
• /
• 제13권1호
• /
• pp.10-18
• /
• 2010

Nanostructured metal oxides have been widely used in the research fields of photoelectrochemistry, photochemistry and opto-electronics. Dye-sensitized solar cell is a typical example because it is based on nanostructured $TiO_2$. Since the discovery of dye-sensitized solar cell in 1991, it has been considered as a promising photovoltaic solar cell because of low-cost, colorful and semitransparent characteristics. Unlike p-n junction type solar cell, dye-sensitized solar cell is photoelectrochemical type and is usually composed of the dye-adsorbed nanocrystalline metal oxide, the iodide/tri-iodide redox electrolyte and the Pt and/or carbon counter electrode. Among the studied issues to improve efficiency of dye-sensitized solar cell, nanoengineering technologies of metal oxide particle and film have been reviewed in terms of improving optical property, electron transport and electron life time.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.269-273
• /
• 2012

Ammonia decomposition over titanium carbides were investigated using eight different samples which have been synthesized by TPR (temperature-programmed reduction) method of titanium oxide ($TiO_2$) with pure $CH_4$. The resulting materials which were synthesized using wo different heating rates and space velocity exhibited the different surface areas. These results indicated that the structural properties of these materials have been related to heating rates and space velocity employed. The titanium carbides prepared in this study proved to be active for ammonia decomposition, and the activity changed with the particle size/surface area. These showed the relationship between ammonia decomposition activity and the different active species. Compared to molybdenum carbide, the titanium carbides were one order of magnitude less active, suggesting the correlation between the activity difference and the degree of electron transfer between metals and carbon in metal carbides.