• 제목/요약/키워드: $TiO_2$ membrane

검색결과 139건 처리시간 0.031초

상반전 기법으로 제조한 PVdF-HFP/(SiO2, TiO2) 고분자 전해질을 채용한 리튬금속 고분자 2차전지의 충방전 특성 (Charge-Discharge Characteristics of Lithium Metal Polymer Battery Adopting PVdF-HFP/(SiO2, TiO2) Polymer Electrolytes Prepared by Phase Inversion Technique)

  • 김진철;김광만
    • Korean Chemical Engineering Research
    • /
    • 제46권1호
    • /
    • pp.131-136
    • /
    • 2008
  • 용매 N-methyl-2-pyrrolidone(NMP)과 dimethyl acetamide(DMAc)를 각각 사용하고 물을 비용매로 사용하는 상반전 기법에 의해, 실리카($SiO_2$)와 티타니아($TiO_2$) 나노입자가 각각 충진된 poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) 고분자 전해질을 제조하고, 이를 고용량 양극재료인 $Li[Ni_{0.15}Co_{0.10}Li_{0.20}Mn_{0.55}]O_2$를 주성분으로 하는 양전극과 리튬금속 음전극 사이에 채용하는 리튬금속 고분자 2차전지를 제작하여 그 충방전 특성을 조사하였다. 고분자 전해질 제조에 사용한 용매에 상관없이 실리카 충진재의 함량이 40~50 wt%인 상반전막을 고분자 전해질로 적용하였을 때 가장 높은 방전용량(180 mAh/g)을 나타내었으며, 이 경우 대개 80 사이클까지 초기용량의 99% 정도의 지속성을 보이다가 그 이후 급격한 용량 감소를 보였다. 이 용량 감소는 상반전막이 보장하는 용량 유지능력이 더이상 발휘될 수 없는 상태로 고분자 전해질에 리튬 dendrite가 침적되었기 때문이라 생각된다.

관형 세라믹 정밀여과와 광촉매 첨가 PES 구를 이용한 혼성 수처리 공정에서 pH 및 산소 역세척의 영향 (Effect of pH and Oxygen Back-flushing on Hybrid Water Treatment of Tubular Ceramic MF and Photocatalyst Loaded Polyethersulfone Beads)

  • 박진용;박성우;변홍식
    • 멤브레인
    • /
    • 제24권1호
    • /
    • pp.39-49
    • /
    • 2014
  • 고도정수처리를 위한 관형 세라믹 정밀여과와 이산화티타늄($TiO_2$) 광촉매 첨가 PES (polyethersulfone) 구의 혼성공정에서 pH 및 산소 역세척의 영향을 막오염에 의한 저항($R_f$) 및 투과선속(J), 총여과부피($V_T$)의 관점에서 고찰하였다. pH가 높아질수록 $R_f$가 감소하고, J는 증가하는 경향을 보였다. 결과적으로 pH 9에서 최대의 $V_T$를 나타내었다. 탁도의 처리효율은 pH와 무관하게 98.7~99.0%의 비슷한 처리효율을 보였다. 용존유기물질(DOM)의 처리효율은 pH가 높아질수록 감소하였다. 산소와 질소 역세척의 차이를 비교한 결과, $R_{f,180}$ 값이 산소 역세척 시 질소보다 낮게 나타났고, 초기투과선속($J_0$)으로 무차원 화한 최종투과선속($J_{180}/J_0$)은 역세척 주기(FT) 10분과 12분을 제외하고 산소 역세척이 질소 보다 높게 유지되었다. 산소 역세척 시 탁도물질의 처리효율은 질소 보다 다소 높게 나타났지만, 그 차이는 미비하다. 질소 역세척 시 DOM의 처리율은 산소보다 높게 나타났다. 또한, 포화산소 조건에서 탁도물질의 처리율은 산소 또는 질소 역세척 경우와 비슷하게 나타났지만, 포화산소가 광촉매와 반응하여 OH 라디칼을 생성하였기 때문에 DOM의 처리효율은 큰 폭으로 증가하였다.

표면 마이크로 가공기술을 이용한 비냉각 초전형 적외선 검출소자 제작 (Fabrication of Uncooled Pyroelectric Infrared Detector using Surface M Micromachining Technology)

  • 장철영;고성용;이석헌;김동진;김진섭;이재신;이정희;한석룡;이용현
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.115-118
    • /
    • 2000
  • Uncooled pyroelectric infrared detectors based on BST(B $a_{-x}$S $r_{x}$Ti $O_3$) thin films have been fabricated by RF magnetron sputtering and surface Micromachining technology. The detectors form BST thin film ferroelectric capacitors grown by RF magnetron sputtering on N/O/N(S $i_3$ $N_4$/ $SiO_2$/S $i_3$ $N_4$) membrane. The sputtered BST thin film exhibits highly c-axis oriented crystal structure that no poling treatment for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. surface-Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency Gold-black is evaporated on top of the sensing elements used the thermal evaporator. fabricated uncooled pyroelectric infrared detectors is highly output voltage at the low temperature(1$^{\circ}C$).).).

  • PDF

일체형 포토어노드를 활용한 메틸렌블루의 분해 (Photocatalytic Degradation of MB with One-body Photoanode)

  • 심은정;배상현;윤재경;주현규
    • 한국수소및신에너지학회논문집
    • /
    • 제18권1호
    • /
    • pp.40-45
    • /
    • 2007
  • Methylene blue(MB) was photocatalytically degraded with one-body photoanode and solar simulator to investigate the possible application to both environmental purification and photoelectrochemical cell for hydrogen production. Photoactive titanium dioxide was formed on both sides of Ti plate following steps such as rinsing-annealing-calcination or anodizing(20 V, 30 V)-annealing($350^{\circ}C$, $450^{\circ}C)$ after etching. The prepared titania plate($2cm{\times}2\;cm$, ca 1.6 mg $TiO_2$ on the basis of $1\;{\mu}m$ thickness) was used to degrade MB(10 ppm in 200 mL solution). The reaction tended to follow the Langmuir-Hinshelwood kinetics with zero order. Comparative experiments with Degussa P25 showed the same zero order kinetics when 2 mg of P25 had been used, while the first order kinetics when 200 mg used. This concludes the feasibility of the prepared titania plate as a material for the purification of low-level harmful organics and an electrode or a membrane for photoelectrochemical system for hydrogen production.

Engineered nanoparticles in wastewater systems: Effect of organic size on the fate of nanoparticles

  • Choi, Soohoon;Chen, Ching-Lung;Johnston, Murray V.;Wang, Gen Suh;Huang, Chin-Pao
    • Membrane and Water Treatment
    • /
    • 제13권1호
    • /
    • pp.29-37
    • /
    • 2022
  • To verify the fate and transport of engineered nanoparticles (ENP), it is essential to understand its interactions with organic matter. Previous research has shown that dissolved organic matter (DOM) can increase particle stability through steric repulsion. However, the majority of the research has been focused on model organic matter such as humic or fulvic acids, lacking the understanding of organic matter found in field conditions. In the current study, organic matter was sampled from wastewater treatment plants to verify the stability of engineered nanoparticles (ENP) under field conditions. To understand how different types of organic matter may affect the fate of ENP, wastewater was sampled and separated based on their size; as small organic particular matter (SOPM) and large organic particular matter (LOPM), and dissolved organic matter (DOM). Each size fraction of organic matter was tested to verify their effects on nano-zinc oxide (nZnO) and nano-titanium oxide (nTiO2) stability. For DOM, critical coagulation concentration (CCC) experiments were conducted, while sorption experiments were conducted for organic particulates. Results showed that under field conditions, the surface charge of the particles did not influence the stability. On the contrary, surface charge of the particles influenced the amount of sorption onto particulate forms of organic matter. Results of the current research show how the size of organic matter influences the fate and transport of different ENPs under field conditions.

유전체구 충진형 전극계의 코로나방전과 강전해수 발생특성 (Corona Discharge and Strong Electrolyzed Water Generation Characteristics of the Electrode System Bedded by Dielectric Pellets)

  • 김진규
    • 조명전기설비학회논문지
    • /
    • 제16권4호
    • /
    • pp.46-54
    • /
    • 2002
  • 본 논문은 전해수 발생장치내에 이온분리집속 격막을 설치하여 비유전율이 틀리는 유전체구를 충진한 구조로 함으로써 고효율의 강전해수 발생장치를 제안하였다. 염화나트륨이 용해된 수도수와 일반수도수를 원료수로서 본 강전해수 발생장치에 인입하였을 때 충진된 유전체구의 비유전율 변화가 수중 이온분리집속성능에 미치는 영향을 연구 검토하였다. 실험결과로서 본 강전해수 발생장치에 원료수로서 수도수의 유속을 0.5[LPM]으로 인입시키고 구형파 펄스전류를 1.0[A]로 인가하였을 때 pH 3.1과 10.6의 전해수를 얻을 수 있었다. 그리고 염화나트륨이 0.1[wt%]용해된 수도수의 경우 pH 2.8과 11.7의 전해수를 얻었다. 또한 비유전율이 가장 높은 BaTiO$_3$과 같은 유전체구를 전해수 발생장치에 충진한 경우 각각 PH 2.7, 11.7과 pH 2.4, 12.0의 전해수를 얻을 수 있었다.

Preparation and Characterization of $TiO_2$Filled Sulfonated Poly(ether ether ketone) Nanocomposite Membranes for Direct Methanol Fuel Cells

  • Kim Han-Joo;Kalappa Prashantha;Son Won-Keun;Park Jong-Eun;Oshaka Tetsuya;Kim Hyun-Hoo;Hong Ji-Sook;Park Soo-Gil
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제5C권4호
    • /
    • pp.165-170
    • /
    • 2005
  • A series of inorganic-organic hybrid membranes were prepared with a systematic variation of titanium dioxide nanoparticle content. Their water uptake, methanol permeability and proton conductivity as a function of temperature were investigated. The results obtained show that the inorganic oxide network decreases the proton conductivity and water swelling. It is also found that increase in inorganic oxide content leads to decrease of methanol permeability. In terms of the morphology, membranes are homogeneous and exhibit good adhesion between inorganic domains and the polymer matrix. The properties of the composite membranes are compared with the standard nafion membrane.

{100} 단결정 수소화 티타네이트(H2Ti3O7)를 활용한 저함량 Irridium 수전해 양극 촉매 개발 (Low-iridium Doped Single-crystalline Hydrogenated Titanates (H2Ti3O7) with Large Exposed {100} Facets for Enhanced Oxygen Evolution Reaction under Acidic Conditions)

  • 정선영;한혁수
    • 마이크로전자및패키징학회지
    • /
    • 제30권1호
    • /
    • pp.79-89
    • /
    • 2023
  • 산성 조건에서의 산소 발생 반응(OER)의 효율 향상 및 안정적인 전기 촉매 개발은 양이온 교환 막 (PEM) 수전해 장치의 상용화를 위한 바람직한 목표다. 여기서 우리는 산성 OER에 대해 Ir 함량이 낮은 유망한 촉매로서 Ir이 도핑된 수소화 티타네이트 (Ir-HTO) 나노벨트를 보고한다. 크게 확인할 수 있는 {100}면이 있는 단결정 HTO 나노벨트에 낮은 함량의 Ir(~3.36 at %)을 추가하면 산성 조건에서 OER에 대한 촉매 활성과 안정성이 크게 향상된다. Ir-HTO는 상용적인 대조군 IrO2 촉매보다 성능이 뛰어나다. 10mA cm-2의 전류밀도에서 과전압은 Ir-HTO가 25% 감소했다. Ir-HTO 촉매 성능은 산성 OER에 대한 가장 효율적인 전기 촉매로서 자리 잡고 있다. 심층적인 전기화학적 특성화를 통해 Ir-HTO에 대해 개선된 고유한 촉매 활성 및 안정성도 확인되었다. 따라서, 우리의 실험결과는 낮은 함량의 Ir이 도핑된 단결정 HTO 나노벨트가 산성조건에서 효율적이고 내구성 있는 OER 촉매로 유망 될 수 있음을 보여준다.

아크릴 폐수의 전처리공정에 따른 UF(tubular)/RO(spiral wound) 공정의 성능변화 (The efficiency variation of UF(tubular)/RO(spiral wound) process using acrylic wastewater treated by different pretreatment processes)

  • 이광현;한성범;최대웅
    • 한국물환경학회지
    • /
    • 제18권4호
    • /
    • pp.387-394
    • /
    • 2002
  • 본 연구는 $TiO_2$ 광촉매 및 응집-여과-중화공정을 거친 아크릴폐수를 UF(tubular)/RO(spiral wound)공정에 적용하여 적용압력과 온도변화에 따른 성능변화를 고찰하였다. 한외여과 관형모듈에서 광촉매 전처리수와 응집-여과-중화 전처리수의 COD, T-N은 온도 및 압력변화에 크게 영향을 받지 않고, 제거효율도 낮은 것으로 확인할 수 있었다. TDS 및 turbidity의 경우 한외여과 관형 모듈에서 광촉매 전처리수가 응집-여과-중화공정의 처리수에 비해 처리효율이 우수함을 확인하였다. T-N, TDS는 역삼투막 공정에서 우수한 제거효율을 나타내었다.