• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.62-68
• /
• 1999

Ferroelectric $Sr_{0.7}/B_{2.3}(Ta_{1-x}Nb_x)_2O_9$(x=0, 0.1, 0.2, 0.3) thin films were deposited on $Pt/SiO_2/Si$ substrate by MOD(Metalorganic Decomposition) process. Metal carboxylate and metal alkoxide were used as precursors, and 2-methoxyethanol, xylene as solvents. After spin coating, thin films were pre-annealed at $400^{\circ}C$, followed by RTA(Rapid Thermal Annealing) and final annealing at $800^{\circ}C$ in oxygen atmosphere. These procedures were repeated three times to obtain thin films with the thickness of $2000{\AA}$. To enhance the nucleation and growth of layered-perovskite phase, thin films were rapid-thermally annealed above $720^{\circ}C$ in oxygen atmosphere. As RTA temperature increased, fluorite phase was transformed to layered-perovskite phase. And the change of Nb contents affected dielectric / electrical properties and microstructure. The ferroelectric characteristics of $Sr_{0.7}/B_{2.3}(Ta_{1-x}Nb_x)_2O_9$ thin film were Pr=8.67 $\mu{C}/cm^2$, Ec=62.4kV/cm and $I_{L}=1.4\times10^{-7}A/cm^2$ at the applied voltage of 5V, respectively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.233-239
• /
• 2000

Sr0.9Bi2+xTa2O9(x=0, 0.1, 0.2, 0.3) thin films on IrO2/SiO2/Si or Pt/Ti/SiO2/Si substrate were prepared by spin coating method using SBT stock solutions synthesized by MOD process. SBT thin films on IrO2 transformed to layered perovskite phase at $700^{\circ}C$, but showed low breakdown voltage due to their porous microstructure. The smaple of Sr0.9Bi2+xTa2O9 composition showed the best dielectric and electrical properties. When the sample of the same composition was annealed at 80$0^{\circ}C$, the dielectric and electric properties were improved due to the grian growth and dense surface. the remanent polarization values(2Pr) at $\pm$3 V for IrO2 and Pt electrodes were 10.5, 7.15$\mu$C/$\textrm{cm}^2$, respectively. The SBT thin film with IrO2 electrode showed the lower coercive field. The leakage current density and breakdown voltage of SBT thin films on IrO2 were higher than those on Pt.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.06a
• /
• pp.90-91
• /
• 1994

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.02a
• /
• pp.72-72
• /
• 1999

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.229-230
• /
• 2009

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.575-580
• /
• 2000

Diamond thin films were deposited on $Si_3N_4$, SiC, TiC and $Al_2O_3$, substrates by the CVD method using Ta(TaC)Filament, and the appearance of the diamond films and their adhesion properties were examined by SEM, optical microscopy, indentation test and compression topple test. Diamond films were deposited at lower $CH_4$ concentration than 5%$CH_4$ for all kinds of the substrate material, but graphitic(amorphous)carbon was observed at 10%$CH_4$. The diamond film of about $12\mu\textrm{m}$ thickness on WC substrate partly peeled off, but the film on $Si_3N_4$ substrate held good adhesion. The indentation test showed that roughly ground surface was very effective for adhesion of diamond films to substrate. The topple test revealed that film thickness was an important factor governing the adhesion of the diamond film.

• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.931-936
• /
• 1996

비휘발성 메모리 소자에의 적용을 위한 SrBi2Ta2O9(SBT)박막이 고순도의 Sr, Bi, Ti 금속타겟을 사용하여 Pt/Ti/SiO2/Si 기판 위에 reactive sputtering 법에 의해 증착되었다. 조성의 영향을 평가하기 위하여 Bi 타겟에 인가되는 전원의 변화와 열처리에 따른 C-F(capacitance-frequency), P-E(polarization-electric field), I-V(current-voltage)등의 전기적 특성이 조사되었다. Bi의 양이 증가함에 따라 Bi layer 구조를 나타내는 (105)회절 피크가 증가하였고 $700^{\circ}C$, 산소분위기에서 1시간 동안 열처리후 Sr과 Bi가 심하게 휘발되었으며 박막의 미세구조는 다공질이 되었다. 이러한 이유로 열처리된 박막의 누설 전류 밀도는 증가하였다. 열처리된 시편의 조성은 거의 화학양론비를 이루었으며 4.5$\mu$C/$\textrm{cm}^2$의 Pr값을 갖는 강유전(ferroelectric)특성을 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.174-174
• /
• 2010

본 연구에서는 IBS(Ion Beam Sputter) 증착방법으로 Cr2O3, Ta2O5 타겟을 이용하여 single layer 산화물 박막을 제작하였다. IBS 박막 증착 시 발생하는 전하의 영향을 상쇄시키기 위하여 neutralizer를 사용하였다. 증착 시 기판을 si, quartz, 그리고 sapphire로 변화시켜 각 기판위에 증착한 산화물 박막에 대한 특성평가를 하였으며, 증착 전 기판 cleaning방법에 따른 변화도 같이 관찰하였다. 증착된 박막의 두께, 거칠기, 밀도 등을 평가하기 위해 XRR(X-ray Reflectometer)을 이용하여 살펴보았다. 기판, 박막두께, cleaning 등의 조건을 변화시켜 여러 종류의 박막을 만들었다. Sapphire 기판에 증착한 박막은 XRR 그래프의 변화가 생겼는데 cleaning과 곡률반경에 의한 영향임을 확인하였다. 다른 종류의 기판에서도 같은 현상이 있을 것으로 예상되고, 이런 영향은 IBS로 증착되는 산화물박막을 분석하는 데에 많은 도움이 될 것으로 기대된다.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.224-230
• /
• 1999

$SrBi_{2x}Ta_2O_9$ (SBT) thin films were prepared on platinized silicon substrates by MOD process, and their ferroelectric and leakage current characteristics were investigated. The grain size of the MOD derived SBT films increased with increasing the BI/Ta mole ration. Although the SBT films with x of 0.8~1.2 were composed of the equiaxed grains, the elongated grains were also observed for the SBT films with x of 1.4 and 1.6. The SBT film with x of 1.2 exhibited the optimum ferroelectric properties of 2PR : 9.79 $\muC/\textrm{cm}^2$ and Ec : 24.2kV/cm at applied voltage of 5V. The leakage current density of the SBT films increased with increasing the BI/Ta mole ratio. With post annealing process, 2Pr and $E_c$of the SBT film with x of 1.2 increases 11.3 $\muC/\textrm{cm}^2$ and 39.6kV/cm, respectively. decrement of the leakage current density by post annealing process increased remarkably with increasing the Bi/ta mole ratio, and the SBT film with x=1.6 exhibited the lowest leakage current density after post annealing process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.116-119
• /
• 2003

Self-patterning of thin films using photosensitive sol solution has advantages such as simple manufacturing process compared to photoresist/dry etching process. In this study, ferroelectric $Sr_{0.9}Bi_{2.1}Ta_2O_9$(SBT) and $La_{0.5}Sr_{0.5}CoO_3$(LSCO)thin films have been prepared by spin coating method using photosensitive sol solution. $Sr(OC_2H5)_2$, $Bi(TMHD)_3$ and $Ta(OC_2H)_5)_5$ were used as starting materials for SBT solution and $La(OCH_2CH_2OCH_3)_3$, $Sr(OC_2H_5)_2$, $CO(OCH_2CH_2OCH_3)_2$ were used for LSCO solution. Solubility difference by UV irradiation on LSCO thin film allows to obtain a fine patterning due to M-O-M bond formation. The lowest resistivity($4{\times}10^{-3}{\Omega}cm$) of LSCO thin films was obtained by annealing at $740^{\circ}C$.