• 한국결정학회지
• /
• 제8권1호
• /
• pp.6-14
• /
• 1997

제올라이트 X에 $Sr^{2+}$와 $K^+$ 이온이 교환된 $Sr_{31}K_{30}-X$와 $Sr^{2+}$와 $Tl^+$ 이온이 교환된 $Sr_{8.5}Tl_{75}$의 결정구조를 공간군 Fd3로 $21(1)^{\circ}C$에서 단결정 X선 결정학적 방법으로 해석하였다. 각각의 결정은 $Sr(ClO_4)_2$와 (K 혹은 Tl)$NO_3$의 몰 비가 1 : 5인 용액을 사용해서 흐름 법으로 5일 동안 이온 교환시키고 $360^{\circ}C$에서 진공탈수 시켜 두 결정을 얻었다. 이들 결정은 회절강도가 $I>2{\sigma}(I)$인 293개와 351개의 회절반사를 사용하여 최종오차인자가 $R_1=0.072,\;R_w=0.057$과 $R_l= 0.058,\;R_w=0.044$까지 각각 정밀화하였다. $Sr_{31}K_{30}-X$결정에서 $Sr^{2+}$ 이온과 $K^+$ 이온은 모두 다섯 개의 서로 다른 결정학적 자리에 존재하였다. 단위세포당 16개의 $Sr^{2+}$ 이온은 결정학적 자리 I인 D6R의 중심에 각각 위치하고 D6R 모두를 채우고 있다. 나머지 15개의 $Sr^{2+}$ 이온과 17개의 $K^+$ 이온은 큰 동공 속에 있는 결정학적 자리II에 위치하고 세 개의 산소이온이 이루는 평면에서 각각 $0.45{\AA},\;1.06{\AA}$ 큰 동공속으로 이동하여 위치하고 골조산소와 결합거리는 각각 $2.45(1){\AA},\;2.64(1){\AA}$이다. 13개의 $K^+$ 이온은 두 개의 다른 결정학적자리 III'에 위치하며 인접한 산소와의 결합거리는 각각 $2.88(7){\AA}$와 $3.11(10){\AA}$이다. $Sr_{8.5}Tl_{75}-X$에서는 $Sr^{2+}$이온과 $Tl^+$ 이온이 역시 다섯 개의 서로 다른 결정학적 자리에 위치한다. 약 8.5개의 $Sr^{2+}$ 이온은 결정학적 자리 I에 있으며, 15개의 $Tl^+$ 이온은 D6R의 3회 전축상의 소다라이트내에 있는 결정학적 자리 I'에 있다. 이 $Tl^+$ 이온은 골조산소와의 결합거리가 $2.70(2){\AA}$이며 세 개의 산소가 이루는 평면에서 $1.68{\AA}$ 소다라이트내로 이동하여 위치한다. 32개의 $Tl^{+}$ 이온은 결정학적 자리 II에 존재하고 있으며 산소와의 결합거리를 $2.70(1){\AA}$을 유지하면서 큰 동공속으로 $1.48{\AA}$ 이동하여 위치한다. 약 18개의 $Tl^+$ 이온은 결정학적 자리III에, 또 다른 10개의 $Tl^+$ 이온은 결정학적 자리III'에 존재하고 골조 산소와 각각 $2.86(2){\AA},\;2.96(4){\AA}$의 결합거리를 이룬다.

• 한국항해항만학회지
• /
• 제32권6호
• /
• pp.499-503
• /
• 2008

국제해사기구(IMO) 해양환경보호위원회(MEPC)의 회의 결과 새로이 제정된 선박의 밸러스트 수 처리 기준(D2규정)에 부합하는 밸러스트 수 처리 공정의 개발이 전 세계적으로 활발히 진행되고 있다. 밸러스트 수 처리 시스템에서 여과공정의 경우 $10{\mu}m$ 이상의 미세물질을 시간당 500톤 이상의 대용량으로 처리해야하며, 선내의 좁은 공간에 최소의 부피로 설계되어야 하는 제한요소가 전제되므로 실용적인 처리장치의 개발이 매우 어렵다. 본 연구에서는 이러한 제한요소를 극복하기 위한 방안으로 차세대 자기 역세형 메디아 필터에 관한 연구를 추진하게 되었으며 여재층의 두께에 따른 압력과 유량의 측정변화와 어느 크기의 입자까지 여과할 수 있는지 확인하기 위하여 진공여과 후 여과수 중의 입자의 입도 분석실험을 수행한 결과 원하는 성능옳 얼기 위한 각 메디아별 입자크기와 여재층의 두께를 구할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1656-1662
• /
• 2013

The ternary phase $EuZn_xIn_{4-x}$ has been identified as the main product of reactions of Eu, Zn, and In by using the In-flux method and characterized by both powder and single-crystal X-ray diffraction. The structure belongs to the common $BaAl_4$-type (tetragonal space group I4/mmm, Pearson code tI10) with lattice parameters of a = 4.5610(9) ${\AA}$, c = 12.049(3) ${\AA}$ for composition $EuZn_{1.10(12)}In_{2.90}$ and a = 4.5463(3) ${\AA}$, c = 12.028(2) ${\AA}$ for composition $EuZn_{1.18(2)}In_{2.82}$, respectively. In this structure, the Eu atoms are situated at the center of 18-vertex Fedorov polyhedra made of Zn and In atoms, where the 4d site is preferentially occupied by In and the 4e site is occupied by randomly mixed Zn and In atoms. Theoretical investigations using tight-binding linear muffintin orbital (TB-LMTO) method provide rationale for the observed site preferences and suggest potentially wider homogeneity range than the experimentally established for $EuZn_xIn_{4-x}$ ($x{\approx}1.1$).

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.81-87
• /
• 2005

This study is numerical analysis on the increasing temperature characteristics of vaporizer fin for liquefied natural gas with super low temperature. Existing LNG vaporizers use the direct contact heat transfer mode where the extreme super low temperature LNG of $-162^{\circ}C$ flows inside of the tubes and about $20^{\circ}C$air flows on outside of the fin. Recently, the vaporizers with great enhanced performance compared to conventional type have been developed to fulfill these requirements. The vaporizing characteristic of LNG vaporizer with air as heat source has a fixed iced. These characteristic cause a low efficiency in vaporizer, total plant cost and installing space can be increased. The vaporizing characteristics of LNG via heat exchanger with air are analytically studied for an air heating type vaporizer. This study is intended to supply the design data for the domestic fabrication of the thickness and angle vaporizer fin. Governing conservation equations for mass, momentum and energy are solved by STAR-CD based on an finite volume method and SIMPLE algorithm. Calculation parameter is fin thickness, setup angle and LNG temperature. If the vaporization performance of the early stage and late stage of operating is considered, the case of ${\phi}=90^{\circ}$ was very suitable. In this paper was estimated that the heat transfer was most promoted in case of THF=2mm.

• 센서학회지
• /
• 제9권3호
• /
• pp.213-223
• /
• 2000

원자력 관련시설이나 우주 공간, 방사선 치료 센터 등에서 발생되는 방사선량은 정확히 검출되어야 할 필요성이 있다. 본 논문에서는 상용 P채널 Power MOSFET(metal oxide field effect transistor)를 방사선 누적선량 모니터링 센서로 활용하기 위해 실시간 방사선량 검출 측정 시스템을 설계 제작하였고, 시스템의 성능을 분석하기 위하여 Co-60 $\gamma$선원을 갖춘 고준위 조사시설에서 조사한 후 출력특성의 변화를 분석하였다. 방사선 조사실험 결과 P채널 Power MOSFET은 조사된 누적 방사선량에 비례하여 문턱전압($V_T$)이 변화됨과 곡선 변화의 선형적 특성을 지님을 알 수 있었다. 이 선형 함수관계를 이용하여 저가의 상용 P채널 Power MOSFET를 사용한 방사선 총 누적선량을 모니터링하기 위한 센서로 사용할 수 있음을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.90-95
• /
• 2011

PURPOSE. To compare the fracture resistance and the mode of failure of endodontically treated teeth restored with different post-core systems. MATERIALS AND METHODS. Root canal treatment was performed on 40 maxillary incisors and the samples were divided into four groups of 10 each. For three experimental groups post space preparation was done and teeth were restored with cast post-core (Group B), stainless steel post with composite core (Group C) and glass fiber post with composite core using adhesive resin cement (Group D). Control group (A) samples were selected with intact coronal structure. All the samples were prepared for ideal abutment preparation. All the samples were subjected to a load of 0.5 mm/min at $130^{circ}$.until fracture occurred using the universal testing machine. The fracture resistance was measured and the data were analyzed statistically. The fracture above the embedded resin was considered to be favorable and the fracture below the level was considered as unfavorable. The statistical analysis of fracture resistance between different groups was carried out with t-test. For the mode of failure the statistical analysis was carried out by Kruskal-Wallis test and Chi-Square test. RESULTS. For experimental group Vs control group the fracture resistance values showed significant differences (P<.05). For the mode of failure the chi-square value is 16.1610, which means highly significant (P=.0009) statistically. CONCLUSION. Endodontically treated teeth without post core system showed the least fracture resistance demonstrating the need to reinforce the tooth. Stainless steel post with composite core showed the highest fracture resistance among all the experimental groups. Teeth restored with the Glass fiber post showed the most favorable fractures making them more amenable to the re-treatment.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.369-376
• /
• 2013

The purposes of this study were to assess dynamic stability toward pelvis-spine column distortion during running and to compare the typical three-dimensional angular kinematics of the trunk motion; cervical, thoracic, lumbar segment spine and the pelvis from the multi-segmental spine model between exercise group and non-exercise group. Subjects were recruited as exercise healthy women on regular basis (group A, n=10) and non-exercise idiopathic scoliosis women (group B, n=10). Data was collected by using a vicon motion capture system (MX-T40, UK). The pelvis, spine segments column and lower limbs analysiaed through the 3D kinematic angular ROM pattern. There were significant differences in the time-space variables, the rotation motion of knee joint in lower limbs and the pelvis variables; obliquity in side bending, inter/outer rotation in twisting during running leg movement. There were significant differences in the spinal column that is lower-lumbar, upper-lumbar, upper-thoracic, mid-upper thoracic, mid-lower thoracic, lower thoracic and cervical spine at inclination, lateral bending and twist rotation between group A and group B (<.05, <.01 and <.001). As a results, group B had more restrictive motion than group A in the spinal column and leg movement behaved like a 'shock absorber". And the number of asymmetry index (AI) showed that group B was much lager unbalance than group A. In conclusion, non-exercise group was known to much more influence the dynamic stability of equilibrium for bilateral balance. These finding suggested that dynamic stability aimed at increasing balance of the trunk ROM must involve methods and strategies intended to reduce left/right asymmetry and the exercise injury.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.63-69
• /
• 2015

The thermal balance test in vacuum chamber for satellite structures is an essential step in the process of satellite development. However, it is technically and economically difficult to fully replicate the space environment by using the vacuum chamber. To overcome these limitations, the thermal analysis through a computer simulation technique has been conducted. The CFRP composite material has attracted attention as satellite structures since it has advantages of excellent mechanical properties and light weight. However, the nonuniform nature of the thermal conductivity of the CFRP structure should be noted at the step of thermal analysis of the satellite. Two different approaches are studied for the thermal analyses; a detailed numerical modeling and a simplified model expressed by an effective thermal conductivity. In this paper, the effective thermal conductivities of the CFRP composite structures are extracted from the detailed numerical results to provide a practical thermal design data for the satellite fabricated with the CFRP composite structure. Calculation results of the surface temperature and the thermal conductivities along x, y, z directions show fairly good agreements between the detailed modeling and the simplified model for all the cases studied here.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.1-6
• /
• 2012

PURPOSE. The aim of this study was to compare the flexural strength of polymethyl methacrylate (PMMA) and bis-acryl composite resin reinforced with polyethylene and glass fibers. MATERIALS AND METHODS. Three groups of rectangular test specimens (n = 15) of each of the two resin/fiber reinforcement were prepared for flexural strength test and unreinforced group served as the control. Specimens were loaded in a universal testing machine until fracture. The mean flexural strengths (MPa) was compared by one way ANOVA test, followed by Scheffe analysis, using a significance level of 0.05. Flexural strength between fiber-reinforced resin groups were compared by independent samples t-test. RESULTS. For control groups, the flexural strength for PMMA (215.53 MPa) was significantly lower than for bis-acryl composite resin (240.09 MPa). Glass fiber reinforcement produced significantly higher flexural strength for both PMMA (267.01 MPa) and bis-acryl composite resin (305.65 MPa), but the polyethylene fibers showed no significant difference (PMMA resin-218.55 MPa and bis-acryl composite resin-241.66 MPa). Among the reinforced groups, silane impregnated glass fibers showed highest flexural strength for bis-acryl composite resin (305.65 MPa). CONCLUSION. Of two fiber reinforcement methods evaluated, glass fiber reinforcement for the PMMA resin and bis-acryl composite resin materials produced highest flexural strength. Clinical implications. On the basis of this in-vitro study, the use of glass and polyethylene fibers may be an effective way to reinforce provisional restorative resins. When esthetics and space are of concern, glass fiber seems to be the most appropriate method for reinforcing provisional restorative resins.

• 한국전자파학회논문지
• /
• 제24권10호
• /
• pp.979-986
• /
• 2013

본 논문에서는 이동통신 기기에서 ESD(ElectroStatic Discharge) 보호소자로 흔히 사용되는 TVS(Transient Voltage Suppressor) diode로 야기되는 잡음 신호가 안테나 무선감도 저하에 미치는 영향에 대해 분석하였다. 다양한 기능을 가진 스마트폰의 경우, 좁은 실장 공간으로 인해 스피커가 안테나 영역 근처에 존재할 수 있고, 스피커로 유입되는 ESD로부터 오디오 증폭기를 보호하기 위한 TVS가 안테나 GND로 사용되어지는 영역에 위치할 수 있다. 스피커를 구동시키는 class-D 증폭기에서 발생하는 디지털 오디오 신호와 안테나에서 커플링되어 스피커로 전달되어진 CDMA(Code Division Multiple Access) RF(Radio Frequency) 통신 신호가 TVS에 의해 믹싱되고, 안테나의 GND로 누설되어 안테나 무선감도를 저하시키는 현상에 대해 실험적 분석후 시뮬레이션을 통해 검증하였다. 이를 통해 비선형적인 ESD 보호소자가 신호의 원치 않는 결합통로가 되는 문제를 사전에 차단할 수 있을 것으로 보인다.