• 천문학회보
• /
• 제38권2호
• /
• pp.34.2-34.2
• /
• 2013

Star formation beyond the galaxy discs and the principles governing it have attracted a lot of recent attention and the advent of ultraviolet (UV) and mid-infrared (MIR) telescopes like the GALEX and Spitzer have enabled major advances in such studies. In order to study the HI gas properties such as the morphology, kinematics and column density distributions, and their correlation with the star forming zones, especially in the tidal bridges, tails and debris, we carried out an HI survey of a set of Spitzer-observed interacting systems using the Giant Metrewave Radio Telescope (GMRT). Here we present results from three of these systems, Arp86, Arp181 and Arp202. In Arp86, we detect excellent star-gas correlation in the star forming tidal bridges and tails. In Arp181, we find the two interacting galaxies to be highly gas depleted and the entire gas of the system is found in the form of a massive tidal debris about 70 kpc from the main galaxies. In all three cases, Arp86, Arp181 and Arp202, the tidal debris seem to host ongoing star formation. We also detect three new candidate tidal dwarf galaxies (TDG) in these systems with large quantities of gas associated with them.

• Ocean Science Journal
• /
• 제42권4호
• /
• pp.241-246
• /
• 2007

Northern Arabian Sea (NAS) between $17^{\circ}N-20.5^{\circ}N$ and $59^{\circ}E-69^{\circ}E$ was observed by using Argo float daily data fur about 9 months, from April 2002 through December 2002. Results showed that during April - May mixed layer shoaled due to light winds, clear sky and intense solar insolation. Sea surface temperature (SST) rose by $2.3^{\circ}C$ and ocean gained an average of 99.8 $Wm^{-2}$. Mixed layer reached maximum depth of about 71 m during June - September owing to strong winds and cloudy skies. Ocean gained abnormally low $\sim18Wm^{-2}$ and SST dropped by $3.4^{\circ}C$. During the inter monsoon period, October, mixed layer shoaled and maintained a depth of 20 to 30 m. November - December was accompanied by moderate winds, dropping of SST by $1.5^{\circ}C$ and ocean lost an average of 52.5 $Wm^{-2}$. Mixed layer deepened gradually reaching a maximum of 62 m in December. Analysis of surface fluxes and winds suggested that winds and fluxes are the dominating factors causing deepening of mixed layer during summer and winter monsoon periods respectively. Relatively big]h correlation between MLD, net heat flux and wind speed revealed that short term variability of MLD coincided well with short term variability of surface forcing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.816-821
• /
• 2005

The cycloid reducer has very high efficiency, high ratios, high stiffness and small size, in comparison with a conventional gear mechanism, which makes it an attractive candidate for limited space and precision application such as industrial robot. There are several publications on analysis and design of the cycloid reducer, however, it was assumed that the contact stiffness of pin rollers and cycloid disk is constant regardless of their contact geometry. Moreover, the torsional stiffness of the cycloid reducer couldn't be calculated due to the assumption. In this paper, we present a new procedure of calculating torsional stiffness of the cycloid reducer using Hertz contact theory. First, conventional force analysis of the cycloid reducer is briefly reviewed. Then, iterative numerical calculation procedure of the contact stiffness is proposed based on the Hertz contact theory where the contact stiffness depends on the contact force. In addition, total torsional stiffness of the cycloid reducer is estimated considering its rolling element bearing stiffness. The torsional stiffness of the cycloid reducer is dominated by the rolling element bearing stiffness since the contact stiffness of the cycloid disk is too large.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.35-41
• /
• 2012

This paper presents incompressible Navier-Stokes solution algorithm for 2D Free-surface flow problems on the Cartesian mesh, which was implemented to run on Graphics Processing Units(GPU). The INS solver utilizes the variable arrangement on the Cartesian mesh, Finite Volume discretization along Constrained Interpolation Profile-Conservative Semi-Lagrangian(CIP-CSL). Solution procedure of incompressible Navier-Stokes equations for free-surface flow takes considerable amount of computation time and memory space even in modern multi-core computing architecture based on Central Processing Units(CPUs). By the recent development of computer architecture technology, Graphics Processing Unit(GPU)'s scientific computing performance outperforms that of CPU's. This paper focus on the utilization of GPU's high performance computing capability, and presents an efficient solution algorithm for free surface flow simulation. The performance of the GPU implementations with double precision accuracy is compared to that of the CPU code using an representative free-surface flow problem, namely. dam-break problem.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1712-1719
• /
• 2015

In recent days, there was a significant development on the electrical, thermal, mechanical, physical, chemical, magnetic and optical properties of the polyamide enamel, varnish and other insulating materials by the addition of nano fillers to it. Enamel was used in High Voltage Apparatuses used in Medical Electronics as insulation. Insulating materials determine the life time of the electrical apparatuses. The life time of the insulating materials was improved by the addition of nano fillers to it. Hence the life time of the electrical apparatuses was improved by the mixing of nano fillers to the enamel. In this research, the basic dielectric properties of the enamel and enamel mixed with nano composites of silica and alumina were analyzed and compared with each other. The addition of nano fillers has improved the quality factor and capacitance of the enamel. It was also observed that the addition of nano fillers has reduced the dissipation factor and dielectric losses of the enamel. Heat produced by the dielectric losses was also reduced by adding nano fillers to it.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.458-462
• /
• 2007

타원편광분석법은 반도체 물질의 광 특성과 전이점 연구에 유용하게 쓰이는 기술이다. 측정된 유전율 함수로부터 전이점을 구하기 위해서 전통적으로 이차 미분스펙트럼을 이용하여 분석하는데, 이 방법은 high frequency 의 잡음을 크게 증폭시키는 단점이 있다. 본 연구에서는 역 공간 푸리에 변환 (Fourier transform)을 이용하여 low-, medium-, high-index 의 푸리에 계수로부터 baseline, 정보, high frequency 잡음을 분리하는 방법을 소개하고자 한다. 이 방법을 이용하여 광전자소자에 폭넓게 사용되는 ZnCdSe 화합물 반도체의 $E_1,\;E_1+{\Delta}_1$ 전이점에 대한 연구를 하여 전통적인 이차 미분법과 비교해 보았다.

• Journal of Biosystems Engineering
• /
• 제36권5호
• /
• pp.348-354
• /
• 2011

Various crop spacing methods have been implemented so far for the greenhouse and plant factory applications. However, there is no generally accepted parameter for evaluation of plant spacing efficiency in plant production system. In this study, 'Planted Area Index' (PAI) of a spacing method is defined as the ratio of the planted area in the field to required planted area using the spacing method when no transplanting operation is assumed. Three common types of spacing methods for plane placement of the plants were modeled mathematically. For calculating the planted area, an optimal growth radius function (R(t)) is needed. Function of the days after transplanting stage gives a radius of an optimal circle area for the living plants. A computer simulation was developed to calculate the PAI, based on three crop spacing methods and four optimal growth radius functions. In general, the 1-D zigzag spacing showed the best PAI. Moreover, it gives an example on how to apply the PAI for the design.

• 한국결정학회지
• /
• 제2권2호
• /
• pp.22-27
• /
• 1991

4-Amino-n(2,6-dimethyl-4-pyrlmidnyl) benzenesulfonamide, Cs2Hl4N402의 단위 세포상수는a=12.626,b=11.262, c=9.375,a=b=r=90°,V=1333,07A3, Dcal=1.390g/cm3, T= 295k, 공간군는 Pca21이고 사방정계이며 Z=4이다. A (Cu-Ke )=1.5418입을 사용한 1068개의 회 절반점에 대한 최종신뢰도 R값은 R=0.040, weighted R값 Rw=0.046이다. 본 화합물은 c축 방향으로 층을 이루고 있는 총상구조이다. 각 층은 H(N2) 와 N(3), H(NIA)과 0(1)간에 강한 수소결합으로 연결되어지고 있다.

• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.241-247
• /
• 2005

본 논문에서는 플라이휠의 저장에너지를 이용한 다이나믹 무정전 전원장치를 제안하고 동작기능을 분석하였다. 배터리를 에너지 저장요소로 사용하고 있는 기존의 무정전 전원장치에 비해 플라이휠 방식의 무정전 전원장치는 수명이 길고, 효율이 높으며, 환경공해가 거의 없으며, 크기도 작고, 특히 유지보수 비용이 현저히 작다는 장점을 갖는다. 무정전 기능뿐 아니라 전압보상 기능도 갖는 시스템에 대한 동작특성을 해석하였으며, 순간정전 후 전압이 복귀되는 시점에서의 위상변동을 신속히 추종하는 특성도 살펴보았다. 시뮬레이션과 실험을 통해서 시스템의 유용성을 검증하였다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제8권2호
• /
• pp.107-114
• /
• 2004

University teachers of linear algebra often feel annoyed and disarmed when faced with the inability of their students to cope with concepts that they consider to be very simple. Usually, they lay the blame on the impossibility for the students to use geometrical intuition or the lack of practice in basic logic and set theory. J.-L. Dorier [(2002): Teaching Linear Algebra at University. In: T. Li (Ed.), Proceedings of the International Congress of Mathematicians (Beijing: August 20-28, 2002), Vol. III: Invited Lectures (pp. 875-884). Beijing: Higher Education Press] mentioned that the situation could not be improved substantially with the teaching of Cartesian geometry or/and logic and set theory prior to the linear algebra. In East Asian countries, science-orientated mathematics curricula of the high schools consist of calculus with many other materials. To understand differential and integral calculus efficiently or for other reasons, students have to learn a lot of content (and concepts) in linear algebra, such as ordered pairs, n-tuple numbers, planar and spatial coordinates, vectors, polynomials, matrices, etc., from an early age. The content of linear algebra is spread out from grades 7 to 12. When the high school teachers teach the content of linear algebra, however, they do not concern much about the concepts of content. With small effort, teachers can help the students to build concepts of vocabularies and languages of linear algebra.